May 2003 - USR-TC - mailman.xmission.com

RE: [USR-TC] Authentication/PPP question
by MPuras＠solunet.com 13 May '03

13 May '03

Perhaps I am not following you but what you are describing is part of the LCP negotiations. Basically, when a PPP user dials up, the start by negotiating LCP, once LCP is negotiatied, they go through authentication and if authentication is successfull then they go through PPP negotiations (IPCP or IPNCP). If this is what you are seeing then this is normal. Thanks, Mario Puras SoluNet Technical Support Mailto: mpuras(a)solunet.com Direct: (321) 309-1410 888.449.5766 (USA) / 888.SOLUNET (Canada) -----Original Message----- From: alex [mailto:alex@wanex.ge] Sent: Tuesday, May 13, 2003 9:25 AM To: usr-tc Subject: [USR-TC] Authentication/PPP question All users on my chassis are dialin PPP users (except manager - for telneting). I think that when those users are dialing in chassis first of all they authenticate to be granted access to this chassis and then authenticate for ppp. (Authenticate, start ppp, authenticate by ppp). I want to skeep first authentication and only authenticate by ppp. How can I do it? _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

Authentication/PPP question
by alex 13 May '03

13 May '03

All users on my chassis are dialin PPP users (except manager - for telneting). I think that when those users are dialing in chassis first of all they authenticate to be granted access to this chassis and then authenticate for ppp. (Authenticate, start ppp, authenticate by ppp). I want to skeep first authentication and only authenticate by ppp. How can I do it?

1 0

Test
by sky1 09 May '03

09 May '03

SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

2 1

Re: [USR-TC] HELP! CALL ROUTING VIA DNIS
by David Seckinger 09 May '03

09 May '03

If i have the wrong equipment and need to purchase something else, that is not a problem. If i have the wrong equipment, recommendations would be great!! Thanks ---------- Original Message ---------------------------------- From: Charles Sprickman <spork(a)inch.com> Date: Tue, 6 May 2003 23:23:44 -0400 (EDT) I'm way fuzzy on this, but I remember a customer some time ago needed this done. I am not completely sure that you can do this with the dual PRI card or not, but if you can, get in the CLI and forget about TCM for this task. You can also cheat a bit and let your telco handle the call routing. It's fairly easy for them on their side. In the meantime, hit totalservice and grab the reference for the dual PRI card. That should at least tell you that it is or isn't possible. I think the person I worked with is on this list, so perhaps he'll chime in... Charles -- Charles Sprickman spork(a)inch.com On Tue, 6 May 2003, David Seckinger wrote: > how can you route a call to a particular modem or modem bank using > DNIS? > > The problem: > > I have two applications that i want to use my tc1000 for: > > 1. Dialin modem bank > 2. Fax Server inbound/outbound > > I have 11 telephone numbers on a T1-PRI. > 555-1000 dialin modem bank number > 555-1111 thru 555-1120 fax numbers > > I have 24 modems on 6 quad modem cards that I would like to split > into 2 banks of 12 modems each. > > If a user dials into 555-1000 i would like for the call to be > routed to the first bank of modems. from there they would be > authenticated as a dialin user. > > If a user dials into 555-1111 thru 1120, I would like to the call > to be routed to the second bank of modems. these would be > connected via reverse-telnet to fax server software. and using > dnis the fax software would send the fax to a users email address. > > my question is: > > how can you route a call to a particular modem or bank using DNIS? > > my equipement: > TC1000 > 1 dual pri > 6 quad modem > 1 hiper arc > 1 network mgt card > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > --- [This E-mail has been scanned for viruses]

1 0

RE: [USR-TC] Hardware version numbers
by Joel - Fox Computers 09 May '03

09 May '03

pretty sure they go up - seems like the low numbered DSP's have USR Printed on the front, higher numbers don't and all of the higher numbered ones look newer. Be aware that the hardware revision reported by the ARC's is not reliable - when you flash the ARC's the hardware rev can change, for example, every ARC with 5.3.110 on it says it is a 17, even if it was a 23 before the flash. - Joel -----Original Message----- From: VCI Help Desk [mailto:admin@vci.net] Sent: Thursday, May 08, 2003 8:40 AM To: USR-TC(a)mailman.xmission.com Subject: [USR-TC] Hardware version numbers Do the hardware version numbers go up or down? I have several TCs and the DSP cards have hardware version numbers like 50, 52, 53. I was wondering if the hardware numbers went up or down because of how the software numbering can be confusing at times. Bill Dunn _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

FS: USR Quad Bundles 48 port v90
by Stephen Rivera - WRCA.Net 08 May '03

08 May '03

Available in stock. 10+ available to ship FOB: Jackson,NJ Chassis dual 70A power NMC v90 Hiper ARC Dual PRI/T1 12- Quad Digital modems $250.00ea ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net WRCA , Inc. - 481 Wright Debow Rd. Jackson, NJ 08527

2 1

Radius acctsessionid
by VCI Help Desk 08 May '03

08 May '03

I just put calls on a new TC and discovered that the acctsessionid's are the same as another TC unit. Is there a setting in the TC that I can tell it to change to another number or something so that the acctsessionid's are different? Bill Dunn Network Admin/Tech Support VCI Internet Services (270) 442-0060 or (800) 755-1239 Office hours: Mon - Fri 8am to 9pm Sat 9am to 5pm Sun Closed

1 0

[USR-TC] Happy buyer making shamless plug for used TC1000 seller swdt.com
by David Covell 08 May '03

08 May '03

Hello all, For several months, Shannon (a.k.a. sky1(a)airmail.net) really worked with our tiny ISP on terms and configuration issues, along with after purchase support questions. Our new (to us) V.92 TC1000 is in service and running well. Shannon (at SouthWest Data Technology, Inc.) took such good care of our ISP Total Control chassis needs that I felt almost obligated to report it to the list. Hopefully this is not a violation of list rules to do this. When I was looking for feedback on used dealers I found it difficult if impossible to do so and wanted to try to save the next person that same effort. So, if you are looking for a good price on a TC1000, give Shannon a call. We had a great experience dealing with them. I am not saying anything bad about other dealers, just that this company was good for us on this deal! Shannon can be reached at: SouthWest Data Technology, Inc 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com David Covell ps: don't tell Shannon I sent you as I don't want Shannon to think I am looking for any favors... :) (if I did break a rule sending this type of message, I promise not to do it again) --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com) Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003

1 0

RE: *MORE INFO* RE: [USR-TC] Urgent Problem - Any Ideas?MajorWTFhere.
by Joel - Fox Computers 08 May '03

08 May '03

We didn't have to change NIC's, but I can't say whether or not the DSP NIC's could cause the same problem. -----Original Message----- From: alex [mailto:alex@wanex.ge] Sent: Thursday, May 08, 2003 8:26 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: *MORE INFO* RE: [USR-TC] Urgent Problem - Any Ideas?MajorWTFhere. Joel, last question about it: do I have to change NICs too? Can DSP's NIC make this problems? Joel - Fox Computers wrote: >Yes, exactly - one bad DSP caused all of the DSP's to have problems, including all (or sometimes just random) B-channels going "local out of service", and a couple times a day the ARC would have an exception, dump all kinds of debug info to the console port and reboot itself. Replaced that one DSP and the whole thing is fine. > >-----Original Message----- >From: alex [mailto:alex@wanex.ge] >Sent: Tuesday, May 06, 2003 8:43 AM >To: Discussion relating to the 3Com/US Robotics Total Control modem >systems. >Subject: Re: *MORE INFO* RE: [USR-TC] Urgent Problem - Any >Ideas?MajorWTFhere. > > >Does it mean that any bad card (DSP or other) can cause reboots of other >cards in chassis? >3COM said that failure of one entity wont cause failure of any other but ... > >Joel - Fox Computers wrote: > > > >>Final solution found - >> >>For those of you who may have been following this and wondered "what the....", here it is. >> >>The exceptions on the ARC causing it to reboot, AND all the B-channels going out of service, appear to have been caused entirely by a bad DSP in one of the slots. >> >>We swapped the ARC and the NMC with different ones, slightly different code on the ARC even, and kept getting the same problem. Pulled all the DSP's except the first two, and the thing ran like a champ. >> >>With utilization near 100% on those first two DSP's, we started plugging in the other DSP's. The second we plugged in the DSP in slot 8, all the users dropped off those first two cards and the B-channels went out of service. Permanently removed that DSP from slot 8 and replaced it with a spare, and the whole chassis has been running fine now for several days without a problem. >> >>So it was a bad DSP all along. >> >>- Joel >> >> >> >>-----Original Message----- >>From: Paul Farber [mailto:farber@admin.f-tech.net] >>Sent: Monday, April 28, 2003 7:33 PM >>To: Discussion relating to the 3Com/US Robotics Total Control modem >>systems. >>Subject: RE: *MORE INFO* RE: [USR-TC] Urgent Problem - Any >>Ideas?MajorWTFhere. >> >> >>Tell us what finally does fix it. >> >> >> >> >> > > > > > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

Hardware version numbers
by VCI Help Desk 08 May '03

08 May '03

Do the hardware version numbers go up or down? I have several TCs and the DSP cards have hardware version numbers like 50, 52, 53. I was wondering if the hardware numbers went up or down because of how the software numbering can be confusing at times. Bill Dunn

1 0