May 2003 - USR-TC - mailman.xmission.com

FS: Cards / 333NMC / 336port bundles / 48 port bundles
by Stephen Rivera - WRCA.Net 20 May '03

20 May '03

All TC1000 hardware in stock. - Qty's available. 333NMC $2500 Hiper NMC $550 Hiper ARC $125 Quad Digital Modems (qty12) $100 for 12 modem nac's Dual PRI $75 Chassis w/ dual 70A power $150 70A power $50ea 336 port bundles. Chassis with dual 130a power Hiper NMC 2- Hiper ARC 14- Hiper DSP $2750.00 48 port bundles Chassis dual 70A power NMC v90 Hiper ARC Dual PRI/T1 12- Quad Digital modems $250.00ea ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net WRCA , Inc. - 481 Wright Debow Rd. Jackson, NJ 08527

1 0

3 Com Security and accounting server
by Steve Godfrey 20 May '03

20 May '03

I need to migrate our dial-up users from the 3 Com security and accounting server to Cisco ACS. Ideally I'd export the users from the 3 Com product (access 97) and import in ACS but the password field is encrypted, anyone know how to decrypt this field? I'm not an access person - I've been searching the web and it looks like I need the "encrypt function (Formula) that encrypted your data" Any ideas? I've contacted 3Com via the company that provide my maintenance contract and they (3 Com) are unwilling to help. Thanks Steve

1 0

SS7 reconnects busy/fast busy
by gambhirmaan shrestha 19 May '03

19 May '03

I'm facing this problem of the subscribers getting busy and fast busy tones when they're dialing in to TC, I have 2 ARCS and 6 DSP's.Calls are handled fine by ARC1 which is designated for DSP on slot 6but when it fills up, ARC2 ( which handles DSP's on 1-5) fails to take the calls, this happens in somewhat fixed interval of time( 6 hours) I have been reseting the ARC2 to SS7 gateway connection for quick fix.Any suggestions in this matter would be helpful. --------------------------------- Do you Yahoo!? The New Yahoo! Search - Faster. Easier. Bingo.

1 0

RE: [USR-TC] Authentication/PPP question
by MPuras＠solunet.com 19 May '03

19 May '03

gotcha. If you want to prevent users from making PPP negotiations without authentication then you need the following (from knowledgebase): Set modems to connection type to normal. Use one of the following commands. hiper>>set modem_group all connection_type normal hiper>>set switched interface<slot:/mod:y>connection_type normal I still dont think however that their is a way to reverse the way the protocol works. I think that the only thing that may help you is "perhaps" the "set modem_group all connection_type ppp_only". I have not used this parameter so I can not confirm whether this will work or not. Thanks, Mario Puras SoluNet Technical Support Mailto: mpuras(a)solunet.com Direct: (321) 309-1410 888.449.5766 (USA) / 888.SOLUNET (Canada) -----Original Message----- From: alex [mailto:alex@wanex.ge] Sent: Tuesday, May 13, 2003 10:17 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] Authentication/PPP question As I know with that configuration users that type null password in their dial-up connection are able to be connected to network, but with my current configuration it isn't possible. Once I tried "set modem_group all connection_type direct_net" but some users had some problems (with win9x). I don't want to fully disable authentication, because some users have to be authenticated. MPuras(a)solunet.com wrote: >I dont think this is possible but it wont be the first time I have been >incorrect. Maybe someone else knows of a way. Can I ask you why you are >wanting to have it done this way? > > > > >Thanks, > >Mario Puras >SoluNet Technical Support >Mailto: mpuras(a)solunet.com >Direct: (321) 309-1410 >888.449.5766 (USA) / 888.SOLUNET (Canada) > > > >-----Original Message----- >From: alex [mailto:alex@wanex.ge] >Sent: Tuesday, May 13, 2003 9:42 AM >To: Discussion relating to the 3Com/US Robotics Total Control modem >systems. >Subject: Re: [USR-TC] Authentication/PPP question > > >I want to start PPP as soon as user is connected to the modem >(see message: PPP starting ...) without any authentication, and then >to authenticate users with PPP. > >MPuras(a)solunet.com wrote: > > > >>Perhaps I am not following you but what you are describing is part of the >>LCP negotiations. Basically, when a PPP user dials up, the start by >>negotiating LCP, once LCP is negotiatied, they go through authentication >> >> >and > > >>if authentication is successfull then they go through PPP negotiations >> >> >(IPCP > > >>or IPNCP). If this is what you are seeing then this is normal. >> >> >> >> >>Thanks, >> >>Mario Puras >>SoluNet Technical Support >>Mailto: mpuras(a)solunet.com >>Direct: (321) 309-1410 >>888.449.5766 (USA) / 888.SOLUNET (Canada) >> >> >> >>-----Original Message----- >>From: alex [mailto:alex@wanex.ge] >>Sent: Tuesday, May 13, 2003 9:25 AM >>To: usr-tc >>Subject: [USR-TC] Authentication/PPP question >> >> >>All users on my chassis are dialin PPP users (except manager - for >>telneting). >>I think that when those users are dialing in chassis first of all they >>authenticate to >>be granted access to this chassis and then authenticate for ppp. >>(Authenticate, start ppp, authenticate by ppp). >>I want to skeep first authentication and only authenticate by ppp. >>How can I do it? >> >> >> >> >>_______________________________________________ >>USR-TC mailing list >>USR-TC(a)mailman.xmission.com >>http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc >> >>_______________________________________________ >>USR-TC mailing list >>USR-TC(a)mailman.xmission.com >>http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc >> >> >> >> >> > > > > > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 3

FS: Cards / 333NMC / 336port bundles / 48 port bundles
by Stephen Rivera - WRCA.Net 19 May '03

19 May '03

All TC1000 hardware in stock. - Qty's available. 333NMC $2500 Hiper NMC $700 Hiper ARC $125 Quad Digital Modems (qty12) $100 for 12 modem nac's Dual PRI $75 Chassis w/ dual 70A power $150 70A power $50ea 336 port bundles. Chassis with dual 130a power Hiper NMC 2- Hiper ARC 14- Hiper DSP $2750.00 48 port bundles Chassis dual 70A power NMC v90 Hiper ARC Dual PRI/T1 12- Quad Digital modems $250.00ea ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net WRCA , Inc. - 481 Wright Debow Rd. Jackson, NJ 08527

1 0

How do I disconnect a user via SNMP on the Netserver Card?
by admin 18 May '03

18 May '03

I dont find MIBs for Netsever Card.... -- Best regards, admin mailto:admin@intranet.kg

1 0

Re: [USR-TC] Wrong AcctSessionTime
by shahrooz 18 May '03

18 May '03

We have same problem with many of our Netserver /16 units. Hope somebody have an answer to this problem. Should we expect an answer from 3Com ? > ----- Original Message ----- > From: "Md. Sifat Ullah Patwary" <sifat(a)spnetctg.com> > To: > Sent: Wednesday, April 23, 2003 12:34 PM > Subject: [USR-TC] Wrong AcctSessionTime > > > > Dear List, > > Yesterday I configured a NETServer/16 V.34. Its working fine. But I found > a > > problem with it. Its not giving acctsessiontime RADIUS correctly to its > > radius server. Everyting is correct except this. I tried to find the exact > > time elapsed by users second and found that no one is accurate. > NETServer/16 > > is giving every entry wrong. Here is a result of query wich gives exact > time > > (AcctStopTime-AcctStartTime) Vs. AcctSessionTime. I have more 2 Terminal > > Server one from PortMaster II and another is Cyclades PR3000. These two > are > > giving the reading correctly but NETServer/16 is not. > > > > mysql> select > > > acctstarttime,acctstoptime,unix_timestamp(acctstoptime)-unix_timestamp(accts > > tarttime) min,acctsessiontime sec from radacct where > > nasipaddress='2x.18x.2x.1x' and acctsessiontime>5000 limit 10; > > +---------------------+---------------------+-------+------------+ > > | acctstarttime | acctstoptime | min | sec | > > +---------------------+---------------------+-------+------------+ > > | 2003-04-22 21:54:47 | 2003-04-22 23:20:15 | 5128 | 6200 | > > | 2003-04-22 21:56:30 | 2003-04-22 23:16:15 | 4785 | 5502 | > > | 2003-04-22 22:31:22 | 2003-04-22 23:49:15 | 4673 | 5405 | > > | 2003-04-22 22:52:26 | 2003-04-23 02:37:23 | 13497 | 34748 | > > | 2003-04-22 23:50:52 | 2003-04-23 01:25:19 | 5667 | 6732 | > > | 2003-04-23 00:36:33 | 2003-04-23 03:05:21 | 8928 | 31606 | > > | 2003-04-23 01:26:35 | 2003-04-23 01:32:50 | 375 | 20208 | > > | 2003-04-23 13:26:16 | 2003-04-23 13:30:27 | 251 | 2147483647 | > > +---------------------+---------------------+-------+------------+ > > 8 rows in set (0.01 sec) > > NAS '2x.18x.2x.1x' is NETServer/16 V.34 > > > > I like to know what I did wrong/ whats the way to fix the problem. > > > > Sifat > > > > > > > > _______________________________________________ > > USR-TC mailing list > > USR-TC(a)mailman.xmission.com > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > >

1 0

Web browsing issue
by Jim McCay 16 May '03

16 May '03

OK, I'm having an issue with users being able to browse the web. After the users dial in, connect, authenicate, they try to go to, for example: www.google.com. Sometimes google comes up quickly, other times it takes several minutes, other times google doesn't come up at all. Now, these sites that users as well as myself can not get to, we ping and traceroute to these sites just fine. No problems, no lags, ect. Some users connect to the USR Total Control chassis at 26000, 28000, 33600, 44000, 50000, 52000. Now we can get sites that are local to our domain to come up within our web browsers just fine, everytime with little to no speed issue at all. Does anybody have any suggestions? Here is some info on my USR Total Control Chassis: using 24port Hiper DSP's - 8mb dram, 2mb flash, software ver 3.5.12 Hiper Arc Router - 131mb dram, 16mb flash, software ver 5.3.3 Hiper NMC - 131mb dram, 62mb flash, software ver 8.7.3 Please note: I've not made any recent changes nor software nor hardware upgrades when this problem reared its ugly head. Thanks for all you help any suggestions. jim

3 2

VOIP
by Lewis Bergman 15 May '03

15 May '03

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Does anyone know if the TC1000 can do VOIP. If so, what it takes to make it do it? Would I need to front the TC with a switch to route VOIP calls to a certain card? Any clues would be of help here. - -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+w7JkpT00mQjG01gRAl/AAJ9iqs6mgbLSpZawHSq5O4L3n36lYgCdGppC rTRAXlXE4cZO32FcqjQjhyU= =4sDy -----END PGP SIGNATURE-----

2 2

RE: [USR-TC] Anyone know if there is an Ascend list like this one
by MPuras＠solunet.com 15 May '03

15 May '03

rte-ascend(a)axiom.digirealm.com rte-ascend(a)lists.real-time.com Thanks, Mario Puras SoluNet Technical Support Mailto: mpuras(a)solunet.com Direct: (321) 309-1410 888.449.5766 (USA) / 888.SOLUNET (Canada) -----Original Message----- From: sky1 [mailto:sky1@airmail.net] Sent: Thursday, May 15, 2003 9:48 AM To: USR-TC(a)mailman.xmission.com Subject: [USR-TC] Anyone know if there is an Ascend list like this one Any of you guys know if there is an Ascend list similar to this Total Control list? May be getting in the Ascend Max 6000 business and I don't know much about them. And as usual here's my 3Com Total Control Spiel for the week: Still have fully loaded Hiper chassis in stock!!! $2750.00 each Configured as follows: (14) Hiper DSP T-1 card sets (2) Hiper ARC 128Mb Version card sets (1) Hiper NMC (2) 130 Amp AC power supplies (1) Blue Labeled chassis w/ integrated fan assembly I also have a few more Hiper NMC's that I am parting out. Have around 10-15 of them I'd sell for $450.00 each Hiper DSP cards T-1 Version $175.00 each Hiper ARC's 128Mb version $125.00 each If anyone needs a spare chassis or 50 let me know!! Thanks for your time, Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0