February 2003 - USR-TC - mailman.xmission.com

Info on upgrading to v.92 pls
by Brent Crier 19 Feb '03

19 Feb '03

Maybe someone on the list can help me out. I'm researching on what needs to be upgraded to be v.92. Currently I'm at TCS ver 4.2 on our TC 1000. I've spent some time on the Commworks site but was not successful. The cards that are in chassis are 14 DSP's that are at 2.1.85, 2 Hiper Arcs one is a 128M and the other is a 64M both at 5.0.9, lastly the NMC is at 7.1.8. If someone has the link or the info on what needs to be upgraded please send me an email. Thanks, -Brent

3 2

how to receive/monitor "traps" for d channels out of service...
by matthew＠the-spa.com 19 Feb '03

19 Feb '03

ok i have been using tcm and total control hardware since like the first month that they rolled out x2 but i have never used any of the trapping options. i have had an occasional (once a week or less) problem where 1 or 2 d channels on different cards will be out of service for no apparent reason. i found the place where you can set a trap for that and have it sent to an ip of a monitoring station. but what software would i run to receive these traps? what would ultimately work best would be something where it sends the message about what channel is out of service and then i could have it automatically forward it to my pager via email. is this simple and i'm just missing it? matthew

2 1

Re: Response to +++ = IgnoreEscCode
by Mike Tindor 19 Feb '03

19 Feb '03

I saw a previous post on the list about the parameters needing changed to enable V.92 and the various components of it. One of them was under 'Call Control Options' : Response to +++ = IgnoreEscCode In a normal chassis config it is set to 'goOnHook' but in the instructions for enabling V.92 that someone posted, it was set to 'IgnoreEscCode' - What exactly is this doing, and is it necessary? Thanks, Mike

1 0

Re: [USR-TC] Weekly Total Control Pricing update
by Thomas_Goodman＠3com.com 18 Feb '03

18 Feb '03

Shannan, Thanks for explaining that. TG "sky1" <sky1(a)airmail.net>@mailman.xmission.com on 02/18/2003 10:05:46 AM Please respond to usr-tc(a)mailman.xmission.com Sent by: usr-tc-admin(a)mailman.xmission.com To: <usr-tc(a)mailman.xmission.com> cc: Subject: Re: [USR-TC] Weekly Total Control Pricing update I "can" upgrade to the latest code if a customer wants ME to do it. I will buy a service contract to do this. I have not had to upgrade any of the boxes for customers because they said they already had service contracts and or they would do it themselves. When I say I can upgrade to latest code, it means I know how it is done. Several people on the list have told me how to do it. Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com ----- Original Message ----- From: <Thomas_Goodman(a)3com.com> To: <usr-tc(a)mailman.xmission.com> Sent: Tuesday, February 18, 2003 9:47 AM Subject: Re: [USR-TC] Weekly Total Control Pricing update > > Shannan, > > How are you upgrading to the latest code? Are you selling support > contracts with each chassis? Is this legal code? > > > > > > > "sky1" <sky1(a)airmail.net>@mailman.xmission.com on 02/18/2003 09:00:22 AM > > Please respond to usr-tc(a)mailman.xmission.com > > Sent by: usr-tc-admin(a)mailman.xmission.com > > > To: <USR-TC(a)mailman.xmission.com> > cc: > Subject: [USR-TC] Weekly Total Control Pricing update > > > Still have several fully loaded Hiper Bundles in stock!! > Selling fully loaded bundles for $4500.00 each (Will give price break on > two > or more bundles) > Hiper Bundles configured: > (14) Hiper DSP > (2) Hiper ARC 128Mb Version > (1) Hiper NMC > (2) 130 Amp AC power supplies > --(6) Six month warranty, can upgrade to the latest code!! > Individual Card prices > Hiper DSP sets $235.00 each (must buy at least two units for this price) > Hiper ARC 128Mb sets $125.00 each > Hiper NMC sets $550.00 each (Only have ~10 of them that I'd like to > sellindividually at this time) > > Thanks for your time, > Shannan Young > SouthWest Data Technology, Inc. > 972-739-7010 > 972-739-7013 (Fax) > sky1(a)airmail.net > www.swdt.com > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

4 3

3Com Dial-Up Modems
by sky1 18 Feb '03

18 Feb '03

I see you guys talking about dial-up modems in the latest thread. Don't know if anyone can use these, but here goes. I have ~ 30 of the Courier V.everythings 56K V.90 version unused in the box (still shrinkwrapped). In my experience dealing with dial-up equipment over the last 15 years, these are the best modems I have run across. I'd sell them for $100.00 each Thanks for your time, Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

2 1

problem connecting
by LaRoy McCann 18 Feb '03

18 Feb '03

I have a customer who's computer will connect with no problems in town. (small town - 6500 population - Trumann, AR) Connect speed of 40.something. That same computer when he tries to connect at his house (about 5 miles out of town) will not connect. He has managed to connect a couple of times, but now it will not verify his login at all. His modem is a lucent win modem. It will connect but it will not verify his username and password. And it takes an extremely long time to try to verify his username and password before it fails. The message is usually that the remote computer did not respond. I have tried lowering the baud, but this did not work either. I told him to call the phone company (CenturyTel), which he did. They say that the lines are ok and it must be my equipment. I have taken my laptop out to his house and can connect every time but only at a speed of 20.something. From my house in town my laptop will connect at 48.8. I do not here any static on his line thru the phone, but I do here a small amount of hum. I called my buddy that works for the local phone company and he said that the lines in that area are run to local box and connect back to the co via a t1. He also said they have run a loop test at the customers house and that checks out. 3 out of 4 customers I have in that same area have had the same problems. I do not know what speed the one customer connects at, but he has never called to complain about anything. Could there be something not set right with my chassis? Anyone else had a problem like this? Here are my hardware/software versions. 1 3COM High-Density 24 Channel NAC 3C4 0.49.0 2.1.9 3 3COM High-Density 24 Channel NAC 3C4 0.49.0 2.1.9 4 3COM High-Density 24 Channel NAC 1OQ 0.55.0 2.0.51 16 3COM HiPer ARC NAC 28B 15.0.0 5.0.9 17 3COM Network Management Card with clock 1U600000 6.0 7.1.8 Thanks, and sorry for the long post. LaRoy McCann Data Technology lmccann(a)dtisp.com

4 3

USR/3COM in stock
by Stephen Rivera - WRCA.Net 18 Feb '03

18 Feb '03

Hi Guys, _________________________________ WTB: SNOW BLOWER :) WTB: TC1000 Ingres DS3 card sets WTB: Quad Modem Fan out cables (4 port RS232) _________________________________ Selling fully loaded bundles for $4900.00 1 year warranty (Will give price breaks, just talk to me, you know that... I'm in the selling business) HIPER BUNDLES (14) Hiper DSP (2) Hiper ARC 128Mb Version (1) Hiper NMC (2) 130 Amp AC power supplies 1 year warranty CMTS CHASSIS pre-configured with the following: (1) 3 COM Chassis P/N: 542635-02 (2) 3COM Cable Upstream Receiver NACS P/N: 69-002970-00 (1) Cable Access Router NACS P/N: 69-002656-00R:C (1) Hiper NMC P/N:69-002063-01 (2) AC PSU 130 Amp NACS P/N: 1.009.1529-00 Rev.A (1) Modulator Nic P/N: 69-002681-01R:2 (2) AC PSI 130A NICS P/N: 1.009.1528-00 Rev.A (1) 10/100 NMC NIC P/N: 69-002036-00 (1) 10/100 Ethernet Cable Nic P/N: 69-002340-01R:3 $3600.00 TC1000 Installation and Configuration (via DialUP or IP address) 2 hour technical support $550.00 Individual Card prices MultiSpan96 $3500 Hiper DSP sets $350.00 Hiper ARC 128Mb sets $225.00 Hiper NMC sets $750.00 Cable and modulator sets available. Nics: accepting BO on these nics 002029-00 OC3 $500 002099-00 (BNC) $500 002681-01 Modulator $500 001609-00 Quad T1/E1 nic for ARC $500 Netserver 16 v34 $650 Netserver 8I $500 MP8I $450 MP8 $200 MP16I $550 MP16 v34 $200 Sportster 56k/v90 $50ea Sportster 33.6 $25ea Sportster 14.4 $25ea Viper DSL Modem $300 Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net Tech Support Avail: Cisco, Ascend, 3Com TC1000, Motorola

1 0

RE: [USR-TC] problem connecting
by Joel - Fox Computers 18 Feb '03

18 Feb '03

Bad Phone Line - plain and simple - and maybe the wrong modem to be using on a bad line. When the phone company says they serve that area with a "t1", is that REALLY what they're doing, or are they running a 4-to-1 Multiplexer on a single pair? If that's the case, then no V.90 for sure. I've had a cust in a rural area, all their neighbors get 26400, on his Lucent he'd connect at 44K, but got almost no throughput. Attempts to force a lower baud rate didn't help. Only solution was to replace his modem with a Conexant that only got a 26400 from the start and everything worked peachy. Just my opinion. Joel -----Original Message----- From: LaRoy McCann [mailto:lmccann@roachconveyors.com] Sent: Tuesday, February 18, 2003 3:00 PM To: usr-tc(a)mailman.xmission.com Cc: lmccann(a)dtisp.com Subject: [USR-TC] problem connecting I have a customer who's computer will connect with no problems in town. (small town - 6500 population - Trumann, AR) Connect speed of 40.something. That same computer when he tries to connect at his house (about 5 miles out of town) will not connect. He has managed to connect a couple of times, but now it will not verify his login at all. His modem is a lucent win modem. It will connect but it will not verify his username and password. And it takes an extremely long time to try to verify his username and password before it fails. The message is usually that the remote computer did not respond. I have tried lowering the baud, but this did not work either. I told him to call the phone company (CenturyTel), which he did. They say that the lines are ok and it must be my equipment. I have taken my laptop out to his house and can connect every time but only at a speed of 20.something. From my house in town my laptop will connect at 48.8. I do not here any static on his line thru the phone, but I do here a small amount of hum. I called my buddy that works for the local phone company and he said that the lines in that area are run to local box and connect back to the co via a t1. He also said they have run a loop test at the customers house and that checks out. 3 out of 4 customers I have in that same area have had the same problems. I do not know what speed the one customer connects at, but he has never called to complain about anything. Could there be something not set right with my chassis? Anyone else had a problem like this? Here are my hardware/software versions. 1 3COM High-Density 24 Channel NAC 3C4 0.49.0 2.1.9 3 3COM High-Density 24 Channel NAC 3C4 0.49.0 2.1.9 4 3COM High-Density 24 Channel NAC 1OQ 0.55.0 2.0.51 16 3COM HiPer ARC NAC 28B 15.0.0 5.0.9 17 3COM Network Management Card with clock 1U600000 6.0 7.1.8 Thanks, and sorry for the long post. LaRoy McCann Data Technology lmccann(a)dtisp.com _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

TC ip pools
by VCI Help Desk 18 Feb '03

18 Feb '03

Hi, I've got 4 fully loaded TCs I need to setup and I'm questioning what is the best way to set the IP pools. If I evenly split the DSP cards so I have 7 DSPs assigned to each ARC card I'll need 161 (23 x 7) addresses on each ARC. I've looked at my subnet tables and can't find anything that fits nicely. I have enough IP addresses available, I'm not sure what is the best way to split the addresses onto the TCs. Does anyone have a suggestion? Bill Dunn

2 1

Re: [USR-TC] Weekly Total Control Pricing update
by Thomas_Goodman＠3com.com 18 Feb '03

18 Feb '03

Shannan, How are you upgrading to the latest code? Are you selling support contracts with each chassis? Is this legal code? "sky1" <sky1(a)airmail.net>@mailman.xmission.com on 02/18/2003 09:00:22 AM Please respond to usr-tc(a)mailman.xmission.com Sent by: usr-tc-admin(a)mailman.xmission.com To: <USR-TC(a)mailman.xmission.com> cc: Subject: [USR-TC] Weekly Total Control Pricing update Still have several fully loaded Hiper Bundles in stock!! Selling fully loaded bundles for $4500.00 each (Will give price break on two or more bundles) Hiper Bundles configured: (14) Hiper DSP (2) Hiper ARC 128Mb Version (1) Hiper NMC (2) 130 Amp AC power supplies --(6) Six month warranty, can upgrade to the latest code!! Individual Card prices Hiper DSP sets $235.00 each (must buy at least two units for this price) Hiper ARC 128Mb sets $125.00 each Hiper NMC sets $550.00 each (Only have ~10 of them that I'd like to sellindividually at this time) Thanks for your time, Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

3 2