March 2003 - USR-TC - mailman.xmission.com

dual pri switch types
by shahrooz 08 Mar '03

08 Mar '03

hi all I have dual pri e1 card on my tc. does it supports ntt switch type(Japanese isdn)? I couldn't find ntt in "pri trunk setting -->primary isdn switch type set" option when using tcm. Regards Shahrooz

1 0

RE: [USR-TC] Can't get HDM_24 card to work.
by Joel - Fox Computers 07 Mar '03

07 Mar '03

Your NMC belongs in slot 17. Hiper ARC should be in slot 15 and/or 16. DSP's can be in the rest of the slots. Try that and see if it gets you any farther. - Joel -----Original Message----- From: Justin Wheeler [mailto:tc@datademons.com] Sent: Friday, March 07, 2003 6:38 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] Can't get HDM_24 card to work. As well, the NMC in this system is in port 16. list chassis doesn't show it though. That slot's listed as empty. ... would this normally happen, or is the card likely shot? Regards, Justin Wheeler -- Computer programmer (n): Red-eyed mammal capable of communicating with electronics and inanimate equipment. On Fri, 7 Mar 2003, Charles Sprickman wrote: > On Fri, 7 Mar 2003, Justin Wheeler wrote: > > > I have just configured a new USR-TC to go into production. > > > > But the slots containing the modems continue to stay in "Operational > > State: Down" mode.. > > It's a bit of a long shot, but once you've got everything set to what you > think are the correct values, do a 'save to nvram' on all your dsps and a > 'save all' on the arc. Then power down the whole mess and see if your > problem is still there. > > If that doesn't work, give us some specifics about the PRIs and your PRI > settings. > > Charles > > > I am positive the PRI going into the HDM cards are OK, because if I plug > > it into a portmaster, it works instantly. > > > > The card in list chassis is listed correctly. > > > > No matter what I do, it won't take calls, and I get "operational state: > > down" when I do list inter slot:1/mod:1 (or any other modem for that > > matter.) > > > > I've tried 3 different cards in 3 different slots. > > > > Is there anything blatant I'm missing? > > > > My knowledge of USR-TC are somewhat limited.. (What I've leared trying to > > fix them..).... > > > > Any help would be apprecitaed. > > > > Regards, > > Justin Wheeler > > > > -- Computer programmer (n): Red-eyed mammal capable of communicating with > > electronics and inanimate equipment. > > > > > > _______________________________________________ > > USR-TC mailing list > > USR-TC(a)mailman.xmission.com > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

5 4

RE: [USR-TC] Hard/soft busy or off hook?
by Joel - Fox Computers 07 Mar '03

07 Mar '03

Soft Busy - busy out unused trunks without dropping connected calls. As connected users disconnect, the trunks they were using become busy. Hard Busy - busy out all trunks immediately, dropping any connected callers. -----Original Message----- From: Paul Farber [mailto:farber@admin.f-tech.net] Sent: Thursday, March 06, 2003 12:24 PM To: usr-tc(a)lists.xmission.com Subject: [USR-TC] Hard/soft busy or off hook? I need to skip over some DSPs so I can reboot them. What state should the modems be put into to have the telco skip over them and hunt to the next open line? hard or soft busy? off hook? This is such a noob question but its not in my archive of TC posts. -- Paul Farber Farber Technology farber(a)admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

RE: [USR-TC] I discovered a great site for adults: http://www.HappyHug.com
by Joel - Fox Computers 07 Mar '03

07 Mar '03

oh dear god -----Original Message----- From: Betty Trimbo [mailto:betty_trimbo@hotmail.com] Sent: Friday, March 07, 2003 11:27 AM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] I discovered a great site for adults: http://www.HappyHug.com Hi, I was surfing and discovered a great site for Adults: http://www.HappyHug.com This is a new site for adults. They are operating since 9 december 2002. It looks good to me!! Betty _________________________________________________________________ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

Can't get HDM_24 card to work.
by Justin Wheeler 07 Mar '03

07 Mar '03

I have just configured a new USR-TC to go into production. But the slots containing the modems continue to stay in "Operational State: Down" mode.. I am positive the PRI going into the HDM cards are OK, because if I plug it into a portmaster, it works instantly. The card in list chassis is listed correctly. No matter what I do, it won't take calls, and I get "operational state: down" when I do list inter slot:1/mod:1 (or any other modem for that matter.) I've tried 3 different cards in 3 different slots. Is there anything blatant I'm missing? My knowledge of USR-TC are somewhat limited.. (What I've leared trying to fix them..).... Any help would be apprecitaed. Regards, Justin Wheeler -- Computer programmer (n): Red-eyed mammal capable of communicating with electronics and inanimate equipment.

2 3

I discovered a great site for adults: http://www.HappyHug.com
by Betty Trimbo 07 Mar '03

07 Mar '03

Hi, I was surfing and discovered a great site for Adults: http://www.HappyHug.com This is a new site for adults. They are operating since 9 december 2002. It looks good to me!! Betty _________________________________________________________________ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail

1 0

RE: [USR-TC] I discovered a great site for adults:http://www.HappyHug.com
by Joel - Fox Computers 07 Mar '03

07 Mar '03

I feel violated -----Original Message----- From: Stephen Rivera - WRCA.Net [mailto:steverivera@wrca.net] Sent: Friday, March 07, 2003 11:41 AM To: usr-tc(a)mailman.xmission.com Subject: RE: [USR-TC] I discovered a great site for adults:http://www.HappyHug.com LOL, we've been infiltrated :) At 11:33 AM 3/7/2003 -0600, you wrote: >oh dear god > >-----Original Message----- >From: Betty Trimbo [mailto:betty_trimbo@hotmail.com] >Sent: Friday, March 07, 2003 11:27 AM >To: usr-tc(a)mailman.xmission.com >Subject: [USR-TC] I discovered a great site for adults: >http://www.HappyHug.com > > >Hi, >I was surfing and discovered a great site for Adults: >http://www.HappyHug.com > >This is a new site for adults. >They are operating since 9 december 2002. >It looks good to me!! > >Betty > > > > > > >_________________________________________________________________ >The new MSN 8: advanced junk mail protection and 2 months FREE* >http://join.msn.com/?page=features/junkmail > > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net Tech Support Avail: Cisco, Ascend, 3Com TC1000, Motorola _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

RE: [USR-TC] Fixed assigment modem routing
by RickL＠solunet.com 06 Mar '03

06 Mar '03

John, Fixed assignment on modems means if a call from the telco comes in on span 1 channel one, it will hit modem 1 in slot one. If you set it to round robin, a call that comes in on span 1, channel 1, might hit modem card 1 channel 15. What you don't have control over is the TELCOs call routing method (of course, you can call them and request a different routing method). YOU can only control MODEM call routing assignments for calls that hit a particular modem. Same principle: Round Robin from the telco gives you equal distribution/usage of all cards. Round Robin set on the DSP will give you even distribution/usage of modems on that card. In the example below, if you have your DSP's set to distribute calls in a fixed assignment fashion, then you can be pretty sure you received calls from the telco on Span 1/Ch 24 Span 1/ch 22 Span 2/ch 24 Span2/Ch 1 Hope that helps... Rick Team Solunet -----Original Message----- From: John R. Aynesworth [mailto:jra@hcsinc.com] Sent: Thursday, March 06, 2003 5:52 PM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] Fixed assigment modem routing I'm trying to set up fixed assignment modem routing on a TC1000 running TCS 4.2.73 with two HiPER DSP's running 2.1.9 attached to channelized T1's. I've used both the DSP console level command "set mdmrmeth fixeda" and the TCM method using Configure/Programmed Settings/Card Level/Parameter/Routing Method. A "display mdmrmeth" on each DSP in console mode shows FIXED ASSIGNMENT. Any suggestions? Am I missing something? HiPer>> list ip pool IP ADDRESS POOLS Name Address Size InUse State Route Unused Status tcpool 156.46.203.129/26 48 45 PUBLIC NO_AGGREGATE 0 ACTIVE HiPer>> list ip netwo CONFIGURED NETWORKS Name Prot Interface State Type Network Address hnet IP eth:1 ENA STAT 156.46.108.4/C IP-loopback IP loopback ENA AUTO 127.0.0.1/H ek-ip-I1513 IP slot:2/mod:1 ENA DYN 156.46.203.177/H deb-ip-I1536 IP slot:2/mod:24 ENA DYN 156.46.203.163/H jab-ip-I1278 IP slot:1/mod:22 ENA DYN 156.46.203.145/H jjw-ip-I1280 IP slot:1/mod:24 ENA DYN 156.46.203.129/H

1 0

IP address Pool questions
by Jim Mc Cay 06 Mar '03

06 Mar '03

Hello, I have a Chassis that is populated with 14 Hiper DSP cards, 2 Hiper Arc Router cards and 1 Hiper NMC. I need to setup the odd # dsp cards to use the 1st router card and the even # dsp cards to use the 2nd router card. My second task is on each card I've been asked to setup a separate IP address pool. Example: DSP card in slot 1, assign an address pool starting with 192.168.0.1 that has 24 addresses. slot 3, assign an address pool starting with 192.168.0.25 that has 24 addresses. And so on, so forth. Any takers on this issue? Any help would be appreciated. Thanks, jim

3 5

Fixed assigment modem routing
by John R. Aynesworth 06 Mar '03

06 Mar '03

I'm trying to set up fixed assignment modem routing on a TC1000 running TCS 4.2.73 with two HiPER DSP's running 2.1.9 attached to channelized T1's. I've used both the DSP console level command "set mdmrmeth fixeda" and the TCM method using Configure/Programmed Settings/Card Level/Parameter/Routing Method. A "display mdmrmeth" on each DSP in console mode shows FIXED ASSIGNMENT. Any suggestions? Am I missing something? HiPer>> list ip pool IP ADDRESS POOLS Name Address Size InUse State Route Unused Status tcpool 156.46.203.129/26 48 45 PUBLIC NO_AGGREGATE 0 ACTIVE HiPer>> list ip netwo CONFIGURED NETWORKS Name Prot Interface State Type Network Address hnet IP eth:1 ENA STAT 156.46.108.4/C IP-loopback IP loopback ENA AUTO 127.0.0.1/H ek-ip-I1513 IP slot:2/mod:1 ENA DYN 156.46.203.177/H deb-ip-I1536 IP slot:2/mod:24 ENA DYN 156.46.203.163/H jab-ip-I1278 IP slot:1/mod:22 ENA DYN 156.46.203.145/H jjw-ip-I1280 IP slot:1/mod:24 ENA DYN 156.46.203.129/H

1 0