August 2002 - USR-TC - mailman.xmission.com

Console cable for Managed Modem Pool
by Mike Wilker 05 Aug '02

05 Aug '02

Is the console cable for the Managed Modem Pool the same as one for a Hiper ARC/DSP? I can't seem to get it to work on my modem pool. Thanks. Mike Wilker Director of Network Operations Tiger Communications & Local Link USA

2 2

HiperDSP and certain modem chipsets
by WebMaster 05 Aug '02

05 Aug '02

Hi, We're having handshaking issues with our HiperDSP (3.5.12) rack and certain client modem chipsets. Customers with Lucent WinModems and older USR Sportsters (x2) aren't finishing a handshake. The strange thing is that the same customers can connect fine onto our older Quad Modem racks. We've tried to reproduce the problem here with no success. I've tried Lucent drivers from 5.20 to 8.22 (newest), and they all connected fine. I've also tried older USR Sportsters with v.34, x2, and v.90 flash. They also connected fine, although the x2 flashes only connected at v.34. CommWorks support suggested I disable pcm upstream, and to try the 3.5.100 ER DSP code. I've also (as per the knowledge base) tried disabling v.92 altogether, and also V.FC Precoding. I even (on a whim) tried disabling V.44 and V.42. Nothing seems to have any effect. Has anyone else experienced similar problems, or have any ideas? Thank you, Allen Hebenthal Systems Administrator FloodCity Internet (814) 288-3223 sysadmin(a)floodcity.net

3 2

RE: [USR-TC] BRI ISDN
by BSmith＠solunet.com 05 Aug '02

05 Aug '02

-----Original Message----- From: Support [mailto:support@inet2000.com] I'm looking for 10 ports (20 x 64K Channels). Right now I'm using Total Control I-Modem 8i which are basically simple modems with serial ports that are plugged into an NT server and a multi-serial (Equinox) card. That's actually how we started offering 56K service years ago - it's a way to add ports a couple lines at a time, rather than 24 at a time with PRI/T1. There are also the SuperStack 1500's that can use BRI lines to provide V.90 dialin, but since I have the chassis now, I was hoping to move everything into that chassis so I'd have one management interface. The NT/RAS solution I have is working well, but I've got my T1's in the Total Control Chassis and then these 16 BRI channels in the NT box and it's two separate user databases and two separate log files for billing, etc. ----- Original Message ----- Todd, You can look at getting an Atlas 800 [adtran] with some BRI modules on that. That way you can trunk BRI into that box, and then pass over a PRI/T1 to your TC-HUB. We have one setup in our lab, and it functions wonderfully. You could even probably find a used one somewhere pretty cheap! Thanks, Brian Smith CCNA, NCSA Network Support Engineer SOLUSERVE www.solunet.com 1571 Robert J. Conlan Blvd., Suite 110 Palm Bay, FL 32905 (888)449-5766 fax: (321)-676-1287

1 0

RE: [USR-TC] Speaking of EdgeServers
by Joel - Fox Computers 04 Aug '02

04 Aug '02

It's my understanding that it can, as long as you have the right drivers for it. By the way, anyone need any EdgeServer parts? I've got an Edge Server Pro that doesn't boot, but it does have all the parts, including dual hard drives, just missing the memory and it wouldn't start with any of the DIMM's I had around here to try. - Joel -----Original Message----- From: Shawn Mitchell [mailto:shawnm@iodamedia.net] Sent: Saturday, August 03, 2002 12:28 AM To: usr-tc(a)mailman.xmission.com Subject: RE: [USR-TC] two arcs Hummm.... Can the Edge Server take the place of the ARC? -----Original Message----- From: usr-tc-admin(a)mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Seth Jacobs Sent: Saturday, August 03, 2002 12:11 AM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] two arcs The Arc is a router. You have to have one. The NMC cards are management cards. They do things like SNMP, traps, alarms, etc. You don't actually have to have an NMC card in the chassis for the chassis to take calls. Seth ----- Original Message ----- From: "Shawn Mitchell" <shawnm(a)iodamedia.net> To: <usr-tc(a)mailman.xmission.com> Sent: Friday, August 02, 2002 9:21 PM Subject: RE: [USR-TC] two arcs > Sorry.. I'm very new to the 3Com equipment... > > But can someone tell me the diff between the ARC and the NMC cards? > > What do the NMC cards do? What do the ARC cards do? > > > > -----Original Message----- > From: usr-tc-admin(a)mailman.xmission.com > [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of V > Sent: Friday, August 02, 2002 10:37 PM > To: usr-tc(a)mailman.xmission.com > Subject: Re: [USR-TC] two arcs > > > Ok on the ARC you have three options. > > NMC SETTINGS > Chassis Awareness: DISABLED > Dynamic Slot Assignment: DISABLED > DSA Idle Rebalancing: DISABLED > > If you have one ARC in the chassis, all you have to do is enable > > Chassis Awareness and disable everything else. > > If you have more than one ARC, you have two options. > > Option 1 > > Disable everything and configure modems static > > Option 2 > > Hot Stand by > > In here you enable one arc to static to own all the modems and insert the > other ARC with NMC chassis awareness (all options enabled). On the ARC > which owns all the modems static then enable all the three NMC options, save > all and do not reboot. What this does is if the arc that owns all the dsp > crashes (meaning if it does not come back after 5 min or more) the other > HiPer arc will take over all the DSPs. > > The other options is to insert the first ARC card and enable all the options > under NMC and leave it own all the cards, once it does insert the second ARC > card with all the options enabled. In this configuration, slowly all the > modems will be shared between cards over a period of time. > > -V > ----- Original Message ----- > From: "Lewis Bergman" <lbergman(a)abi.tconline.net> > To: <usr-tc(a)mailman.xmission.com> > Sent: Wednesday, July 31, 2002 10:44 PM > Subject: Re: [USR-TC] two arcs > > > > > > V said: > > > Lets first talk about the versions of ARC code. What is the version of > > > ARC code you are using, the answer depends on the arc code. > > 5.3.100 for me. > > -- > > Lewis Bergman > > Texas Communications > > 4309 Maple ST. > > Abilene, TX 79602 > > 915-695-6962 > > > > > > > > _______________________________________________ > > USR-TC mailing list > > USR-TC(a)mailman.xmission.com > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

3 2

RE: [USR-TC] Speaking of EdgeServers
by Joel - Fox Computers 04 Aug '02

04 Aug '02

I still got it - Make me an offer on it. -----Original Message----- From: WayneG [mailto:WayneG@uplogon.com] Sent: Sunday, August 04, 2002 10:39 AM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] Speaking of EdgeServers Joel, we'll take that if it's still available. Thank you, -Wayne. Wayne Griswold Network Administrator U.P.Log-On Internet Computer Connection U.P. 500 N. Stephenson Ave Iron Mountain, MI 49801 (906) 774-4847 (906) 774-0335 (fax) SysAdmin(a)uplogon.com ----- Original Message ----- From: "Joel - Fox Computers" <jfox(a)foxcomputers.com> To: <usr-tc(a)mailman.xmission.com> Sent: Saturday, August 03, 2002 12:04 AM Subject: RE: [USR-TC] Speaking of EdgeServers It's my understanding that it can, as long as you have the right drivers for it. By the way, anyone need any EdgeServer parts? I've got an Edge Server Pro that doesn't boot, but it does have all the parts, including dual hard drives, just missing the memory and it wouldn't start with any of the DIMM's I had around here to try. - Joel -----Original Message----- From: Shawn Mitchell [mailto:shawnm@iodamedia.net] Sent: Saturday, August 03, 2002 12:28 AM To: usr-tc(a)mailman.xmission.com Subject: RE: [USR-TC] two arcs Hummm.... Can the Edge Server take the place of the ARC? -----Original Message----- From: usr-tc-admin(a)mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Seth Jacobs Sent: Saturday, August 03, 2002 12:11 AM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] two arcs The Arc is a router. You have to have one. The NMC cards are management cards. They do things like SNMP, traps, alarms, etc. You don't actually have to have an NMC card in the chassis for the chassis to take calls. Seth ----- Original Message ----- From: "Shawn Mitchell" <shawnm(a)iodamedia.net> To: <usr-tc(a)mailman.xmission.com> Sent: Friday, August 02, 2002 9:21 PM Subject: RE: [USR-TC] two arcs > Sorry.. I'm very new to the 3Com equipment... > > But can someone tell me the diff between the ARC and the NMC cards? > > What do the NMC cards do? What do the ARC cards do? > > > > -----Original Message----- > From: usr-tc-admin(a)mailman.xmission.com > [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of V > Sent: Friday, August 02, 2002 10:37 PM > To: usr-tc(a)mailman.xmission.com > Subject: Re: [USR-TC] two arcs > > > Ok on the ARC you have three options. > > NMC SETTINGS > Chassis Awareness: DISABLED > Dynamic Slot Assignment: DISABLED > DSA Idle Rebalancing: DISABLED > > If you have one ARC in the chassis, all you have to do is enable > > Chassis Awareness and disable everything else. > > If you have more than one ARC, you have two options. > > Option 1 > > Disable everything and configure modems static > > Option 2 > > Hot Stand by > > In here you enable one arc to static to own all the modems and insert the > other ARC with NMC chassis awareness (all options enabled). On the ARC > which owns all the modems static then enable all the three NMC options, save > all and do not reboot. What this does is if the arc that owns all the dsp > crashes (meaning if it does not come back after 5 min or more) the other > HiPer arc will take over all the DSPs. > > The other options is to insert the first ARC card and enable all the options > under NMC and leave it own all the cards, once it does insert the second ARC > card with all the options enabled. In this configuration, slowly all the > modems will be shared between cards over a period of time. > > -V > ----- Original Message ----- > From: "Lewis Bergman" <lbergman(a)abi.tconline.net> > To: <usr-tc(a)mailman.xmission.com> > Sent: Wednesday, July 31, 2002 10:44 PM > Subject: Re: [USR-TC] two arcs > > > > > > V said: > > > Lets first talk about the versions of ARC code. What is the version of > > > ARC code you are using, the answer depends on the arc code. > > 5.3.100 for me. > > -- > > Lewis Bergman > > Texas Communications > > 4309 Maple ST. > > Abilene, TX 79602 > > 915-695-6962 > > > > > > > > _______________________________________________ > > USR-TC mailing list > > USR-TC(a)mailman.xmission.com > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

two arcs
by Charles Sprickman 03 Aug '02

03 Aug '02

Hi, I've been reading up on how to get two hiper arcs working, and there appear to be numerous ways... -static config where each arc owns half the cards -dynamic config where the nmc decides who owns what -variations on the above Which one actually works? I'm most interested in sharing the load, but an automatic failover would be nice too. I saw some old posts in the archives that mention that in some failure modes (where the arc doesn't fully fail but sticks in a reboot loop) the whole chassis basically takes a dive as ownership flip-flops between two arcs. Is that ironed out? What version of arc code starts to support all this stuff well? Thanks, Charles -- Charles Sprickman spork(a)inch.com

8 14

RE: [USR-TC] two arcs
by Scott Trautman 03 Aug '02

03 Aug '02

I'm probably just stating the obvious here (is to me anyway), but we certainly keep spare equipment at a different location such that -- worst cases -- equipment blows up, flames out, gets stolen, etc., that we'll be back in business ASAP. Your ARC, a chassis (find yourself a dual 45A...many of us have "spares" up the wazoo) and perhaps a spare DSP & NMC to go with that extra ARC. I know how easy it is to become enamored with the more geekly aspects of ...anything..., including redundancy, but this is more in the "common sense and protections" zone to consider. A lot of these really groovy and expensive failover types of things don't work so good when a whole box gets fried by lightening, stolen, etc., etc--which are more highly probable and destructive than having a 2nd ARC pick up after a failing one next to it. KISS--90% solutions, covering your bases, probabilities, aren't as exciting (or expensive). Just boring good business practice. Scott Trautman President/Owner www.gdinet.com Global Dialog Internet 608-240-4638,7fax 2049 Skaalen Road Stoughton WI 53589 Internet Service across Southern Wisconsin

1 0

RE: [USR-TC] two arcs
by Joel - Fox Computers 03 Aug '02

03 Aug '02

just FYI - I agree with Charles - I absolutely believe in "KISS". When I started looking at my options, and realized how much more complicated it got with 2 ARC's, and then considered that I only have 2 DSP's, I said "FORGET IT" and pulled the second one. Everything is working like a champ on just one ARC. -----Original Message----- From: Marshall Morgan [mailto:marshall@netdoor.com] Sent: Saturday, August 03, 2002 3:24 AM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] two arcs Charles - I agree with you on this! ... it's not like I don't trust the code or anything ... but better safe than sorry (KISS!) Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Charles Sprickman" <spork(a)inch.com> To: <usr-tc(a)mailman.xmission.com> Sent: Saturday, August 03, 2002 1:51 AM Subject: Re: [USR-TC] two arcs > On Fri, 2 Aug 2002, Seth Jacobs wrote: > > > You don't actually have to have an NMC card in the chassis for > > the chassis to take calls. > > No, but I think if you have two arcs in the chassis and you're doing load > balancing (the last option V mentioned), you'll have problems if the NMC > goes away. > > I'm fairly certain that any of the dual arc configs that are "dynamic" > rely on the nmc, and if you lose the nmc, you're out of luck. In other > words you have a second single point of failure that you tried to avoid by > putting in a second arc. :) > > It seems that the static config is the best, split the dsps up between two > arcs and if one fails (you do monitor the chassis, right :) ? ) you > manually take over the cards in the remaining arc. > > Charles > > > Seth > > > > > > ----- Original Message ----- > > From: "Shawn Mitchell" <shawnm(a)iodamedia.net> > > To: <usr-tc(a)mailman.xmission.com> > > Sent: Friday, August 02, 2002 9:21 PM > > Subject: RE: [USR-TC] two arcs > > > > > > > Sorry.. I'm very new to the 3Com equipment... > > > > > > But can someone tell me the diff between the ARC and the NMC cards? > > > > > > What do the NMC cards do? What do the ARC cards do? > > > > > > > > > > > > -----Original Message----- > > > From: usr-tc-admin(a)mailman.xmission.com > > > [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of V > > > Sent: Friday, August 02, 2002 10:37 PM > > > To: usr-tc(a)mailman.xmission.com > > > Subject: Re: [USR-TC] two arcs > > > > > > > > > Ok on the ARC you have three options. > > > > > > NMC SETTINGS > > > Chassis Awareness: DISABLED > > > Dynamic Slot Assignment: DISABLED > > > DSA Idle Rebalancing: DISABLED > > > > > > If you have one ARC in the chassis, all you have to do is enable > > > > > > Chassis Awareness and disable everything else. > > > > > > If you have more than one ARC, you have two options. > > > > > > Option 1 > > > > > > Disable everything and configure modems static > > > > > > Option 2 > > > > > > Hot Stand by > > > > > > In here you enable one arc to static to own all the modems and insert the > > > other ARC with NMC chassis awareness (all options enabled). On the ARC > > > which owns all the modems static then enable all the three NMC options, > > save > > > all and do not reboot. What this does is if the arc that owns all the dsp > > > crashes (meaning if it does not come back after 5 min or more) the other > > > HiPer arc will take over all the DSPs. > > > > > > The other options is to insert the first ARC card and enable all the > > options > > > under NMC and leave it own all the cards, once it does insert the second > > ARC > > > card with all the options enabled. In this configuration, slowly all the > > > modems will be shared between cards over a period of time. > > > > > > -V > > > ----- Original Message ----- > > > From: "Lewis Bergman" <lbergman(a)abi.tconline.net> > > > To: <usr-tc(a)mailman.xmission.com> > > > Sent: Wednesday, July 31, 2002 10:44 PM > > > Subject: Re: [USR-TC] two arcs > > > > > > > > > > > > > > V said: > > > > > Lets first talk about the versions of ARC code. What is the version > > of > > > > > ARC code you are using, the answer depends on the arc code. > > > > 5.3.100 for me. > > > > -- > > > > Lewis Bergman > > > > Texas Communications > > > > 4309 Maple ST. > > > > Abilene, TX 79602 > > > > 915-695-6962 > > > > > > > > > > > > > > > > _______________________________________________ > > > > USR-TC mailing list > > > > USR-TC(a)mailman.xmission.com > > > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > > > > > > _______________________________________________ > > > USR-TC mailing list > > > USR-TC(a)mailman.xmission.com > > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > > > > > > > > > _______________________________________________ > > > USR-TC mailing list > > > USR-TC(a)mailman.xmission.com > > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > > > _______________________________________________ > > USR-TC mailing list > > USR-TC(a)mailman.xmission.com > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

EMAIL ONLY FILTER
by Joel - Fox Computers 02 Aug '02

02 Aug '02

There was some discussion a few days ago about creating a filter to allow a user access only to email. Does anyone have a filter that conclusively works for this and how to set it up and make it work? I understand how to use RADIUS to enable the filter on specific users, just not sure what all has to be in the filter. Curious if anyone for sure figured it out. Thanks, Joel

1 0

TCM and XP
by Steve Cobb 02 Aug '02

02 Aug '02

I sent this before but I'm not sure that it went through. I'm trying to use TCM 6.0.23 with Windows XP and I can't get it to install. Anyone doing this? Thanks, Steve Cobb

8 8