August 2002 - USR-TC - mailman.xmission.com

V92 Press Release Offer
by Thomas_Goodman＠3com.com 21 Aug '02

21 Aug '02

ISPs looking to inform or attract customers about the use of V92 can contact me OFF LIST about putting out a Joint Press Release. See: http://www.commworks.com/Press/Wired_Access/ for examples 7/2/2002 Ripnet Delivers Enhanced Internet Access To Customers 7/2/2002 InfoWest Delivers Enhanced Internet Access To Customers The intent is to get your local papers to pick up on these stories to help you find additional subscribers and/or inform the public that your ISP is out there. Its an offer, there is no charge. Thanks, Tom Goodman CommWorks Corporation Sales

5 5

Asign IP-Pool with L2TP
by Esteban Troncoso Suarez 20 Aug '02

20 Aug '02

Hi I'm terminating an L2TP tunnel on a HiperArc (LNS), but I can't to assign ip pool to incomming users. They (users) are authenticated in my Radius, but when Radius reply the attributes (pool name, dns primary, dns secondary, wins primary), the name of pool is not considerated (ip pool are defined locally in the HiperArc) and the session is configurated with an ip of other pool. Please, consider the follow: .- The ip assigned is taked from other pool, as long as this pool is defined as "public". If I set all pool as "private" then the sesion is unsuccessful. .- The reply atribute used for assign pool name is "USR-Framed_IP_Address_Pool_Name". This parameter works well with users that enter to same HiperArc bydirect dialup access. Thanks Esteban

2 1

RE: [USR-TC] TC1000 NEBS Compatible...
by Joel - Fox Computers 20 Aug '02

20 Aug '02

Not that I've ever heard of "NEBS Compliant" or know what it means. But I do know you can get mounting brackets for mounting either in the center or at the rear. That's what the 3 bolt holes on the sides of the chassis are for. -----Original Message----- From: Lyle Evans [mailto:mlevans@blacksburg.net] Sent: Monday, August 19, 2002 4:10 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] TC1000 NEBS Compatible... At 04:46 PM 08/19/02 -0400, you wrote: >Does anyone know if a USR Total Control Network Management Hub used for >dail-up access is NEBS Certified for placement in Verizon CO's. I remember seeing that one had use a special rackmount bracket that allows mounting on a 2 post rack more or less center mounted, in order to be NEBS compliant. I believe it was in one the installation manuals. Lyle Evans lyle(a)rackears.com > > > >Steve Rivera IM: srivera711 >Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 >Fax available equipment to: (732)833-2115 >for more product info got www.wrca.net > > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

5 9

I want to unsubscribe
by Lindenbaum, Giora 19 Aug '02

19 Aug '02

Giora

1 0

HiperDSP error code
by Gen Camiling 19 Aug '02

19 Aug '02

HiperDSP with E1/R2 code v3.1.7 suddenly went dead after a power cycle in a chassis ( scheduled maintenance shutdown ). RN/FL LED is red with some amber LED in the utilization LED, so most definitely this module is dead. Tried to do a console download, the card accepts the download but fails on the boot-up process. Ok now its really a hardware failure, looking to take some positive actions in this situations, can anybody in this list tell me the meaning of this error message/code? Or is there anybody from Commworks looking in this mailing list provide me an answer, it will be a most welcome one. Here's the error code: !!----------> SDL2 for the PPC403 <------------!! __ Enter Download Trigger __ Flash Image Has Valid CRC, Loading Image.... Diagnostic Power-Up Failure Manufacturing Info -> 1AAA13M0 Mode/Env -> 1/0 Fault Code -> 0-8-26-1 Expected Data -> f000000c Received Data -> 7000000c Text Message -> Address Equals Data Test Failure Info Message -> Second read failed. Hard error indicated. -- Best regards, Gen ================================== Gen Camiling Chief Technical Officer International Micro Village, Inc. PHILIPPINES (63)(2) 7512130 mailto:gcamiling@imvi.com.ph ==================================

2 1

Question on Hiper DSP E1/T1 Card
by Patrick Ndegwa 19 Aug '02

19 Aug '02

Hi there, I have been running Hiper DSP E1/T1 cards (code ver 3.5.13) for sometime now on ISDN E1 PRI lines. However, my telco provider wants to provision some new R2 E1 lines. I wanted to know if I need to make any hardware or firmware changes on the Hiper DSP cards to support the R2 lines. Cheers, Patrick Ndegwa

1 0

TC1000 NEBS Compatible...
by Stephen Rivera - WRCA.Net 19 Aug '02

19 Aug '02

Does anyone know if a USR Total Control Network Management Hub used for dail-up access is NEBS Certified for placement in Verizon CO's. Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net

3 2

hub status led red
by Murat Küçük 19 Aug '02

19 Aug '02

I have a Total Control Access Server. I have a problem with it. Periodically it goes dead. And hub status led gets red. I cant make telnet connection to it. I just make a cold reboot and it continues working. The room is not hot. So the TC is not hot also. 2 AC is cooling the room. Where is the problem. Regards, Murat Kucuk www.ebim.net U.S. Robotics Total Control (tm) NETServer Card V.34 V3.3.3 Build date: Nov 27 1996 Build time: 17:06:59 Network Interface Card: Ethernet (24) Packet Bus Circuit : Standard Licensed for 60 ports.

2 3

PRI Cards
by Jason 19 Aug '02

19 Aug '02

Ok have setup the Chassis just fine but now I have PRI's not T-1's is there special cards that I need or can I use the Hiper DSP T1/E1 cards I have? And if I can do I need to configure the cards diff for the signalling or can I leave them setup for T1's? Thanks again, Jason

2 1

Association X update and available hardware
by Stephen Rivera - WRCA.Net 19 Aug '02

19 Aug '02

I have qty 3Com Hiper DSP available for sale. All guaranteed for 30 days. Hiper DSP card sets $650.00each Hiper ARC (64MB) $650 Hiper ARC (128MB) $850 128MB Upgrades available, ARC still need 16MB Flash to run v92 code. Hiper NMC $950 Chassis with Dual 130A power Hiper NMC Hiper ARC 2x Hiper DSP $3900.00 PS...Association X data collection web page is done, we hope to load it to the web today. URL will be http://www.wrca.net/commworks_home.html email me with ideas and thoughts. Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net

1 0