January 2000 - USR-TC - mailman.xmission.com

(usr-tc) Max for DSP cards on TC
by Cheryl Johnson 31 Jan '00

31 Jan '00

I have a TC chassis currently running seven channelized T1s. I have read the maximum for 1 HARC is 10 DSP. Now, in the past we have tried running 10+ DSP cards with 1 HARC and the chassis did not perform as well as a chassis that not fully loaded. (This is from records, I wasn't actually working with the TC when this happened). Is there any issues I should know about before trying to run a TC chassis with 8+ DSP cards? -Cheryl Johnson SEI Data Network Services, Inc. A Division of SEI Communications

3 4

(usr-tc) Booting a user
by Steve Sherwick 31 Jan '00

31 Jan '00

Hi there, I have couple business users running demand dial accounts that are problematic to me. They don't seem to get their systems programmed to demand dial. Since they are running "right to resell" accounts that I'm suppossed to be able to resell in the evenings I wanna boot them when they get anal. The knowlege base says I can login and type show session <user> and get a S number for their session. You're supposed to then do a reset of that s number. I'm afraid the generic Neserver instructions don't match this Hiper monstor I have as it doesn't report an S number at all, It reports the slot/port. Reset doesn't seem to know what to do with it.... So how does one boot a user on this beast Thanks, Steve Minnetonka Micro - Superior Communications Services Since 1984

2 1

(usr-tc) Padding/Fiber/Proximity to CO
by eric＠dol.net 31 Jan '00

31 Jan '00

We just moved to a new location with a fiber feed for our PRIs. We are located right across the street from the phone company, Hell Atlantic. We are getting increases in our disconnects and in connection failures but most appear to be generated from customers who are served from the same co as us. I thought I read in postings a while ago that being too close to the co and on fiber that the lines would be too "hot" and would need to be toned down with padding to make then connections better. Is there something that the phone company needs to do? It is very hard trying to find anyone with clues at BA. Would lowering the transmitter level variable from -11 to -13 help or should it be raised to say -10? thanks eric - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) default settings for DTR
by eric＠dol.net 31 Jan '00

31 Jan '00

I am using quad modems 6.1.6 and netservers 3.7.4 In trying to reduce the number of customers being disconnected after connecting I noticed the "DTR Recognition Time" was set to 5 whereas the default setting in the help screen said the default should be 20. What effect does this variable have on the connection and is 20 indeed a better number to use versus 5. BTW when you request the default value, 5 comes up contrary to to help which say 20 is default. thanks eric - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Booting a user
by Stainforth, Matthew 30 Jan '00

30 Jan '00

on a hiper it's "disconnect user username" and it's case sensitive. To see who's on, it's "list connections". TO see what IP address they have, do "list ip networks". > -----Original Message----- > From: Steve Sherwick [SMTP:hostmaster@minnmicro.com] > Sent: Sunday, January 30, 2000 7:35 PM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Booting a user > > Hi there, > > I have couple business users running demand dial accounts that are > problematic to me. > They don't seem to get their systems programmed to demand dial. Since > they are running "right to resell" accounts that I'm suppossed to be able > to > resell in the evenings I wanna boot them when they get anal. > > The knowlege base says I can login and type show session <user> and > get > a S number for their session. You're supposed to then do a reset of that s > number. I'm afraid the generic Neserver instructions don't match this > Hiper > monstor I have as it doesn't report an S number at all, It reports the > slot/port. > > Reset doesn't seem to know what to do with it.... > > So how does one boot a user on this beast > > Thanks, > > Steve > > Minnetonka Micro - Superior Communications Services Since 1984 > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Quad modem x2 tx level
by Dan Borlovan 30 Jan '00

30 Jan '00

Hello, In order to try improve user x2 connect speeds, I tried to raise the x2 transmit level on quad modem cards. The problem is I have two quad modem models (analog/digital vs. digital only) and the first don't let me go higher than -12dB, while the other ones happily accepted -10dB (this is as far as I may go from the telco point of view) Now the only difference between modems is the analog capability (referring to the possibility of getting signal from nic or pritdm) and the country code. All modems are setup as digital, taking signal via pritdm from e1 card. Is there anything I can do about this one? Dan -- Dan Borlovan <danb(a)dnttm.ro> System Administrator, Network Operation Center Dynamic Network Technologies - Timisoara, Romania Telefon: +40-56-204967 FAX: +40-56-220201 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Been Gone for a long time
by Stainforth, Matthew 29 Jan '00

29 Jan '00

I don't. It's cheaper to keep spare equipment on-hand and buy per-incident support if I'm really stuck. > -----Original Message----- > From: Jeff Mcadams [SMTP:jeffm@iglou.com] > Sent: Friday, January 28, 2000 11:49 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) Been Gone for a long time > > Thus spake John Lange > >How many of you purchase a support contract on ALL of your TC's or just > >a few and wing it??? > > Oh...now you've done it...you've gone and opened up the support contract > issue again. > > OK...just as a show of hands (e-hands?). How many of you have support > contracts on your equipment? I wanna get a feel for how many people > really do actually get the support. I'll keep track and post a summary. > Lurkers, feel free to drop me a line privately if you'd like to continue > lurking, I won't post names or anything...just totals of how many do and > how many don't. :) > -- > Jeff McAdams Email: jeffm(a)iglou.com > Head Network Administrator Voice: (502) 966-3848 > IgLou Internet Services (800) 436-4456 > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Been Gone for a long time
by John Lange 29 Jan '00

29 Jan '00

HI I have been gone for over a year and am wondering if this list is still active? Or if I should be looking in another place. JOhn :} ----- Whatever you do, work at it with all your heart, as working for the Lord, not for men >Colossians 3:23 (NIV) John C. Lange, Sr. PALACE dot NET, INC. microjl(a)palacenet.net MICRO-TECH Computers, Inc. 608.742.1601 & 6980 1819 New Pinery Road http://www.palacenet.net/ Portage, WI 53901 MSCE Training for only $150.00 - http://dpec.palacenet.net/ All 200+ Web Based Courses for $150.00 Per Year - "Really" --- __o --- _-\<,_ Fastest Service in Town --- (_)/ (_) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

7 8

Re: (usr-tc) Soft busy on HDM
by D A Substanley 29 Jan '00

29 Jan '00

Thanks, Kobayashi-san. That seems to work fine. I am sure my customers appreciate not having to be disconnected for maintenance. ^_^; das Yuichi_Kobayashi(a)jp.3com.com (Yuichi_Kobayashi(a)jp.3com.com) spake: > > > Das, > > Regarding of software busy out , from TCM , you can go to program setting of > SPAN line , then select blocking , chose block all , then call connecting HDSP > will not be disconnected and new coming call will be busied out , that the way > Japanese customer doing in Japan . From command , and selecting time-slot , > selecting all with H/W busy or S/W busy won't work in INS1500 . Please let us > know your result of doing this. > > Regards, > Kobayashi. > > > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Been Gone for a long time
by stevec 29 Jan '00

29 Jan '00

We are a new ISP and all our equipment (routers, USR TC) were installed by our TELCO provider for warranty purposes. However, I would like to learn as much a possible about our equipment, specifically our TC chassis. I don't know what kind of cards we have, what revisions, etc. This is all information I would like to know. Where can I get familiar with the equipment I have? ---------- Original Message ---------------------------------- From: Kirk Mitchell <mitch(a)keyconn.net> Reply-To: usr-tc(a)lists.xmission.com Date: Fri, 28 Jan 2000 23:06:21 -0500 >At 10:49 PM 1/28/00 -0500, Jeff Mcadams wrote: >>OK...just as a show of hands (e-hands?). How many of you have support >>contracts on your equipment? I wanna get a feel for how many people >>really do actually get the support. I'll keep track and post a summary. >>Lurkers, feel free to drop me a line privately if you'd like to continue >>lurking, I won't post names or anything...just totals of how many do and >>how many don't. :) > >My support contract ran out in August. I could only afford to replace it >with the software upgrade contract. Pay-per-incident will have to be my >last-ditch bacon-saver if something comes up that I can't resolve by myself >or via this list. > > >-- >Kirk Mitchell-General Manager mitch(a)keyconn.net >Keystone Connect Unlock Your World >Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > -- Steve Cobb stevec(a)computer-geeks.com Computer Geeks www.computer-geeks.com -- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0