November 1999 - USR-TC - mailman.xmission.com

(usr-tc) Adding Hiper DSP to Netserver/Quad modem chassis
by Tim Brown 18 Nov '99

18 Nov '99

I have an older TC chassis with T1/PRI, Quad modem, Netserver PRI, and NMC cards, and two 45amp power supplies. The Netserver and NMC have 16mb ram added (total of 20 I think, the cards have 4mb on board if I remember). I saw a posting to the list indicating that a Hiper DSP card could be added to the chassis as long as the modem density was set properly in the Netserver card for the slot that the Hiper DSP card occupies. Does anyone know if certain versions of software are required in the Netserver and/or NMC to work with the Hiper DSP? I haven't upgraded the software in those cards for quite some time since the chassis works great (except for the occasional modems that won't answer--requires a chassis reset every 60 days or so) and my customers get great x2 and v.90 connects (I use the box myself and usually get a 49333 with the occasional 52000 and 53333--amazing considering we're using channelized T1's with AMI/D4 on this box). If anyone is running a Hiper DSP in a TC chassis similar to mine, I would appreciate feedback on what software versions you're running and how the box has performed after adding the Hiper DSP. Thanks in advance for any assistance and/or info. Tim Brown SumterNet, Inc. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

Re: (usr-tc) Using TCM through firewall
by Steve Valiunas 18 Nov '99

18 Nov '99

UDP 161. It's just SNMP. Steve "Jose de Leon" <jadiel(a)thevision.net> on 11/18/99 01:29:16 PM Please respond to usr-tc(a)lists.xmission.com Sent by: "Jose de Leon" <jadiel(a)thevision.net> To: usr-tc(a)lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) Using TCM through firewall What ports do I need to open in my firewall to use Total Control Manager? Thanks, Jose - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Resetting password on an NMC card
by David DenHollander 18 Nov '99

18 Nov '99

I have a NMC card that is X2 enabled. The card also has a password, which I do not know. Is there away to reset the card without losing the X2 enabling? thanks David David DenHollander (403)254-1100 Main (403)201-2815 Fax - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) dual CT1 code
by Stainforth, Matthew 17 Nov '99

17 Nov '99

yes I did...thanks a lot for checking though > -----Original Message----- > From: Randy McMillan [SMTP:randy@pacinfo.com] > Sent: Wednesday, November 17, 1999 6:58 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) dual CT1 code > > did you get your code yet? > > Randy McMillan > > ----- Original Message ----- > From: Stainforth, Matthew <MatthewS(a)staff.brunnet.net> > To: <usr-tc(a)xmission.com> > Sent: Wednesday, November 17, 1999 11:20 AM > Subject: (usr-tc) dual CT1 code > > > > > > Having registered with Totalservice, all the code is showing as being > > unlocked but I can't seem to get at any of it on the FTP site. Could > > someone kindly email me ct040302.zip? I'm kind of in a hurry and don't > have > > time to wait for 3Com to sort it out... > > > > Matthew Stainforth || Technical Services Manager || BrunNet Inc. > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Strange SSL Problem
by Mark A. Bialik 17 Nov '99

17 Nov '99

Hello: One of our users has reported a strange problem, and I can not figure it out for the life of me. We have two modem banks serving different geographic areas. If he calls his local number, he can not connect to web sites using SSL. If he dials our other modem bank (long distance for him), SSL works just fine! He's tried with both IE and Netscape. I can not re-create the problem. I've dialed into both modem banks and got SSL connections just fine. One rack is a TC Hub, quads, NMC/NSC. The other is a TC HiperArc/DSP. The Hiper is the local rack for him.... the one having the problem. Both racks point at the same router as the gateway, so this has me totally baffled. Any suggestions on where to look? We haven't had any other users complain, and his problem goes away by calling a different modem bank. Strange. Thanks for any help. Regards, Mark ====================================================================== Mark A. Bialik (414) 290-6749 Network/Security Manager http://www.linux.org Infinity HealthCare, Inc. mbialik(a)infinityhealthcare.com Mequon, WI USA Use Linux. ====================================================================== - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) dual CT1 code
by Stainforth, Matthew 17 Nov '99

17 Nov '99

Having registered with Totalservice, all the code is showing as being unlocked but I can't seem to get at any of it on the FTP site. Could someone kindly email me ct040302.zip? I'm kind of in a hurry and don't have time to wait for 3Com to sort it out... Matthew Stainforth || Technical Services Manager || BrunNet Inc. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) different IP pools
by Kalev Nurklik 17 Nov '99

17 Nov '99

Hi All! I'm trying to assign addresses from different pools to users in different groups on one HARC. I would prefer Radius to make the decision which user gets what address so I found USR VSA reply attribute - Framed-IP-Addr-Pool-Name. Getting no help from manual I assumed that this is for telling Harc what pool to use. Great! Attribute works to the point where I can see that the user who's connected to HARC had a right pool name assigned (can't remember exactly how I established that fact, probably with "show session user" command) but the actual IP address from pool will not be assigned to that user. While I'm at it (finding out how to make this work) I hope You'll not be angry if I fire a couple of questions to the honorary list? Has anybody done this? Care to share step by step configuration with me? Harc product reference tends to be quite superficial with ip pool info other than setting them up. BTW, seems that this is not the only issue about what that reference is superficial about. I have had rough time getting useful info from there or for example at least decent descriptions for cli commands - is there any point to offer such half done document where feature/command descriptions are missing? 3com - any comments? And I'm not using reference material for old software - latest I could get from totalservice. One other thing. It seem that I've "attached" some IP pools to default user but I can't figure it out how I did it. I can see those pools when I do the "show user default" but how to add them or delete - beats me! Found no help from Harc command reference... Any help appreciated. Regards, __________________________________ Kalev Nurklik AS MicroLink Online Pa"rnu mnt. 158, 11317 Tallinn, Estonia Tel: +372 6501709 Fax: +372 6501708 E-mail: k.nurklik(a)online.ee http://microlink.online.ee - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 3

Re: (usr-tc) Changing accounting server
by Steve Valiunas 17 Nov '99

17 Nov '99

No, But if you have accounting requests that are being retranmitted to a bad address even after putting in the correct accounting destination, you might have to reboot to get rid of them. Steve Brian Elfert <brian(a)citilink.com> on 11/17/99 09:50:26 AM Please respond to usr-tc(a)lists.xmission.com Sent by: Brian Elfert <brian(a)citilink.com> To: usr-tc(a)xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) Changing accounting server If I change the accounting server on a Netserver card, do I have to reboot to make the change? Brian - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Changing accounting server
by Brian Elfert 17 Nov '99

17 Nov '99

If I change the accounting server on a Netserver card, do I have to reboot to make the change? Brian - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Best MTU speed
by farber＠admin.f-tech.net 17 Nov '99

17 Nov '99

What would be the optimum MTU speed for dial up modems? Ethernet default is 1500, but what about PPP connections? I remember back in Trumpet Winsock days that you would lower that to a 2x multiple of the MSS size (or something like that). Does PPP automatically try and negotiate the largest MTU? Paul Farber Farber Technology farber(a)admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1