May 2018 - montgomery_boats - mailman.xmission.com

Hull #
by bownez＠juno.com 10 May '18

10 May '18

My Yellow 1976 M17 is hull #92. I always thought this was accurate, but Corn Dog, Larry Yake's 1976 M17, is hull #200. Were you REALLY busy in 1976 Jerry? Mr. Bones ____________________________________________________________ Good Morning America Confirms Unfortunate News greatsuperstars.world http://thirdpartyoffers.juno.com/TGL3141/5af1957392e97157359edst03vuc

5 5

Re: M_Boats: Reefing lines (was : Gooseneck on early M17)
by Dan Farrell 09 May '18

09 May '18

Great article, thanks for sharing! Written by Bruce Bingham! Dan Farrell M17 #301 John Schinnerer <john(a)eco-living.net> wrote: >Speaking of reefing lines - here is a nice article on reefing setups: >https://www.cruisingworld.com/seamanship-101-reefing-main > >Pics & diagrams are all after the written text. > >He gives good reasons why internal clew reefing lines result in poor >sail set/shape. Unless you are somehow running them into the boom at an >appropriate point, rather than at end of boom. A clew strap around the >boom might help also. > >I was planning to re-do my reefing setup, and had some of this figured >out, but he points out a number of things I was still not clear on. > >My exception to his setup would be, my topping lift is port side of >boom, not starboard, but I already do it by feel a lot of the time, just >reaching under the boom while staying on starboard side. >On a small boom surface like ours, having multiple reef lines and the >topping lift on the same side would probably not even fit, or would be >too crowded if it was possible to squeeze them in. > >Also on a boat our size, I don't see the need for a 2:1 on the clew >reefing lines. Direct from clew reef point through cheek block to cleat >seems fine. Curious anyone else's experience on that. > >cheers, >John S. > >On 05/08/2018 06:22 PM, Henry Rodriguez wrote: >> Mine is the same (#310.) I took advantage of the open boom end to exit my >> internal reefing lines. They are protected from chafe by a bullseye >> fairlead mounted just inside the opening. >> >> Henry >> Monita >> >> >> On Tue, May 8, 2018, 8:04 PM John Schinnerer <john(a)eco-living.net> wrote: >> >>> Here's mine, from M-17 #38, 1974. >>> >>> Looks like what someone described, and was wondering about. As far as I >>> know this is the original setup (except the reefing hooks which I >>> imagine were added at some later time). Has always seemed quite solid to >>> me...haven't broken it yet anyhow! ;-) >>> >>> cheers, >>> John S. >>> >>> >>> -- >>> John Schinnerer - M.A., Whole Systems Design >>> -------------------------------------------- >>> - Eco-Living - >>> Whole Systems Design Services >>> People - Place - Learning - Integration >>> john(a)eco-living.net - 510.982.1334 >>> http://eco-living.net >>> http://sociocracyconsulting.com >>> > >-- >John Schinnerer - M.A., Whole Systems Design >-------------------------------------------- >- Eco-Living - >Whole Systems Design Services >People - Place - Learning - Integration >john(a)eco-living.net - 510.982.1334 >http://eco-living.net >http://sociocracyconsulting.com >

2 1

Gooseneck on early M17
by John Schinnerer 08 May '18

08 May '18

Here's mine, from M-17 #38, 1974. Looks like what someone described, and was wondering about. As far as I know this is the original setup (except the reefing hooks which I imagine were added at some later time). Has always seemed quite solid to me...haven't broken it yet anyhow! ;-) cheers, John S. -- John Schinnerer - M.A., Whole Systems Design -------------------------------------------- - Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john(a)eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com

3 3

Montgomery Specific parts.
by Kevin Sandwick 08 May '18

08 May '18

Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin, Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

7 11

Re: M_Boats: Montgomery Specific parts.
by Dan Farrell 08 May '18

08 May '18

Thanks Dave, good call. I don't have a broken casting, I have none at all. The end of the boom has stainless tangs pop riveted on, they bend in to meet up with the universal joint on the sliding gooseneck assembly. The mainsail tack is affixed to a shackle attached to the vertical pin on the gooseneck u joint. It looks like someone just jury rigged it. It's held together all right but doesn't seem right to me. I will take some pics tonight so you can see what I mean. I wonder what a new boom would cost. Mine's warped anyway, but looking at the Dwyer pricing, a new one would be quite expensive. Dan Farrell M17 #301 Dave Scobie <scoobscobie(a)gmail.com> wrote: >Dan. > >Need to see if Jerry has any old boomends laying around. The boom, like >the mast, for the old boats is no longer available. > >How badly is it broken? Picture will help in diagnosis of solutions. > > >:: Dave Scobie > >On Sun, May 6, 2018, 8:40 PM Dan Farrell <msog(a)danf.us> wrote: > >> Seem to have missed the key word - I need to replace the gooseneck casting >> for my boom. >> >> Dan Farrell >> M17 #301 >> >> Dan Farrell <msog(a)danf.us> wrote: >> >> >Hi all, >> > >> >Jerry - and everyone else - can you help me identify the section used for >> a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive. >> > >> >Any input will be most appreciated. >> > >> >Thanks, >> > >> >Dan Farrell >> >M17 #301 >> > >> >jerry(a)jerrymontgomery.org wrote: >> > >> >>Kevin- It looks like you have one of the 400-some 17's that I made, >> which >> >>don't have too much in common with the eeg-built boats except that they >> came >> >>out of the same molds. If you can be more specific about what parts you >> >>need, between Dave, Sage marine, and I, we can probably help. >> >> >> >>-----Original Message----- >> >>From: Dave Scobie >> >>Sent: Sunday, May 06, 2018 1:01 PM >> >>To: For and about Montgomery Sailboats >> >>Subject: Re: M_Boats: Montgomery Specific parts. >> >> >> >>Kevin. >> >> >> >>Most if your boat hardware is Schaefer or Garhauer. There are some >> custom >> >>parts, cleats for example, you need to find an equivalent. Jerry, >> >>jerry(a)jerrymontgomery.org, still has a few of the custom parts. >> >> >> >>:: Dave Scobie >> >> >> >>On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick(a)hotmail.com> >> wrote: >> >> >> >>> Greetings, >> >>> Just purchased a new to me M-17, Hull # 400. I am slowly learning to >> >>> navigate the Montgomery web sites but still have not located a source >> for >> >>> Montgomery specific parts. >> >>> At this time I don't need much and could possibly substitute if needed. >> >>> Thanks in advance for any information >> >>> Kevin, >> >>> >> >>> >> >>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for >> >>> Windows 10 >> >>> >> >>> >> >> >> >> >>

4 3

Re: M_Boats: Montgomery Specific parts.
by Dan Farrell 07 May '18

07 May '18

Seem to have missed the key word - I need to replace the gooseneck casting for my boom. Dan Farrell M17 #301 Dan Farrell <msog(a)danf.us> wrote: >Hi all, > >Jerry - and everyone else - can you help me identify the section used for a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive. > >Any input will be most appreciated. > >Thanks, > >Dan Farrell >M17 #301 > >jerry(a)jerrymontgomery.org wrote: > >>Kevin- It looks like you have one of the 400-some 17's that I made, which >>don't have too much in common with the eeg-built boats except that they came >>out of the same molds. If you can be more specific about what parts you >>need, between Dave, Sage marine, and I, we can probably help. >> >>-----Original Message----- >>From: Dave Scobie >>Sent: Sunday, May 06, 2018 1:01 PM >>To: For and about Montgomery Sailboats >>Subject: Re: M_Boats: Montgomery Specific parts. >> >>Kevin. >> >>Most if your boat hardware is Schaefer or Garhauer. There are some custom >>parts, cleats for example, you need to find an equivalent. Jerry, >>jerry(a)jerrymontgomery.org, still has a few of the custom parts. >> >>:: Dave Scobie >> >>On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick(a)hotmail.com> wrote: >> >>> Greetings, >>> Just purchased a new to me M-17, Hull # 400. I am slowly learning to >>> navigate the Montgomery web sites but still have not located a source for >>> Montgomery specific parts. >>> At this time I don't need much and could possibly substitute if needed. >>> Thanks in advance for any information >>> Kevin, >>> >>> >>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for >>> Windows 10 >>> >>> >> >>

3 2

Re: M_Boats: Rigging for my boat
by jerry＠jerrymontgomery.org 07 May '18

07 May '18

Jo Kay Kessler has an unused M-17 spinnaker by Mckibbon that she’ll part with for 250. Perfect opportunity for about half price. McKibbon made very good chutes; I’ve sailed with him many times.

2 2

Re: M_Boats: montgomery_boats Digest, Vol 183, Issue 6
by Kevin Sandwick 07 May '18

07 May '18

Thanks for the response to Montgomery specific parts request. The aluminum tube on one of my spreaders is damaged on the clevis pin side. Serviceable but I would like to replace it. Thanks again Kevin ________________________________ From: montgomery_boats <montgomery_boats-bounces(a)mailman.xmission.com> on behalf of montgomery_boats-request(a)mailman.xmission.com <montgomery_boats-request(a)mailman.xmission.com> Sent: Monday, May 7, 2018 1:00:11 PM To: montgomery_boats(a)mailman.xmission.com Subject: montgomery_boats Digest, Vol 183, Issue 6 Send montgomery_boats mailing list submissions to montgomery_boats(a)mailman.xmission.com To subscribe or unsubscribe via the World Wide Web, visit https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats or, via email, send a message with subject or body 'help' to montgomery_boats-request(a)mailman.xmission.com You can reach the person managing the list at montgomery_boats-owner(a)mailman.xmission.com When replying, please edit your Subject line so it is more specific than "Re: Contents of montgomery_boats digest..." Today's Topics: 1. Montgomery Specific parts. (Kevin Sandwick) 2. Re: Montgomery Specific parts. (Bob Eeg) 3. Re: Montgomery Specific parts. (Dave Scobie) 4. Re: Montgomery Specific parts. (jerry(a)jerrymontgomery.org) 5. Re: Montgomery Specific parts. (Dan Farrell) 6. Re: Montgomery Specific parts. (Dan Farrell) 7. Re: Montgomery Specific parts. (Dave Scobie) 8. Re: Montgomery Specific parts. (Dave Scobie) 9. Montgomery 17 for Sale by owner - SF Bay area (Tyler Heerwagen) 10. Re: Rigging for my boat (Timothy JarviMD) 11. Re: Montgomery Specific parts. (Dan Farrell) 12. Re: Montgomery Specific parts. (Henry Rodriguez) ---------------------------------------------------------------------- Message: 1 Date: Sun, 6 May 2018 19:19:31 +0000 From: Kevin Sandwick <ksandwick(a)hotmail.com> To: "montgomery_boats(a)mailman.xmission.com" <montgomery_boats(a)mailman.xmission.com> Subject: M_Boats: Montgomery Specific parts. Message-ID: <DM3PR16MB06821054E1F9A22CD475A400AA840(a)DM3PR16MB0682.namprd16.prod.outlook.com> Content-Type: text/plain; charset="us-ascii" Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin, Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ------------------------------ Message: 2 Date: Sun, 6 May 2018 19:26:27 +0000 From: Bob Eeg <montgomeryboats(a)hotmail.com> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <CY4PR17MB1975BD1AE136AC1C6B91F7D0B7840(a)CY4PR17MB1975.namprd17.prod.outlook.com> Content-Type: text/plain; charset="utf-8" We built and produce all of the Montgomery models. Maybe you didn?t know that.? What do you need..? Bob 949-489-8227 Montgomery Boats Sent from my iPad > On May 6, 2018, at 12:20 PM, Kevin Sandwick <ksandwick(a)hotmail.com> wrote: > > Greetings, > Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. > At this time I don't need much and could possibly substitute if needed. > Thanks in advance for any information > Kevin, > > > Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 > ------------------------------ Message: 3 Date: Sun, 06 May 2018 20:01:48 +0000 From: Dave Scobie <scoobscobie(a)gmail.com> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <CAGjBOA5zPG_Cn09QpBwp_Z9fDS4gj3c+_mF010PW8s_ntHji5Q(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Kevin. Most if your boat hardware is Schaefer or Garhauer. There are some custom parts, cleats for example, you need to find an equivalent. Jerry, jerry(a)jerrymontgomery.org, still has a few of the custom parts. :: Dave Scobie On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick(a)hotmail.com> wrote: > Greetings, > Just purchased a new to me M-17, Hull # 400. I am slowly learning to > navigate the Montgomery web sites but still have not located a source for > Montgomery specific parts. > At this time I don't need much and could possibly substitute if needed. > Thanks in advance for any information > Kevin, > > > Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > ------------------------------ Message: 4 Date: Sun, 6 May 2018 16:14:49 -0700 From: <jerry(a)jerrymontgomery.org> To: "For and about Montgomery Sailboats" <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <901F24C0548B4E6B95A84ACD9445A085@CH002914> Content-Type: text/plain; format=flowed; charset="UTF-8"; reply-type=original Kevin- It looks like you have one of the 400-some 17's that I made, which don't have too much in common with the eeg-built boats except that they came out of the same molds. If you can be more specific about what parts you need, between Dave, Sage marine, and I, we can probably help. -----Original Message----- From: Dave Scobie Sent: Sunday, May 06, 2018 1:01 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Montgomery Specific parts. Kevin. Most if your boat hardware is Schaefer or Garhauer. There are some custom parts, cleats for example, you need to find an equivalent. Jerry, jerry(a)jerrymontgomery.org, still has a few of the custom parts. :: Dave Scobie On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick(a)hotmail.com> wrote: > Greetings, > Just purchased a new to me M-17, Hull # 400. I am slowly learning to > navigate the Montgomery web sites but still have not located a source for > Montgomery specific parts. > At this time I don't need much and could possibly substitute if needed. > Thanks in advance for any information > Kevin, > > > Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > ------------------------------ Message: 5 Date: Sun, 06 May 2018 21:05:49 -0500 From: Dan Farrell <msog(a)danf.us> To: Msog List <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <4du82idosmyayw6m5krjaay4.1525658540237(a)email.android.com> Content-Type: text/plain; charset=utf-8 Hi all, Jerry - and everyone else - can you help me identify the section used for a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive. Any input will be most appreciated. Thanks, Dan Farrell M17 #301 jerry(a)jerrymontgomery.org wrote: >Kevin- It looks like you have one of the 400-some 17's that I made, which >don't have too much in common with the eeg-built boats except that they came >out of the same molds. If you can be more specific about what parts you >need, between Dave, Sage marine, and I, we can probably help. > >-----Original Message----- >From: Dave Scobie >Sent: Sunday, May 06, 2018 1:01 PM >To: For and about Montgomery Sailboats >Subject: Re: M_Boats: Montgomery Specific parts. > >Kevin. > >Most if your boat hardware is Schaefer or Garhauer. There are some custom >parts, cleats for example, you need to find an equivalent. Jerry, >jerry(a)jerrymontgomery.org, still has a few of the custom parts. > >:: Dave Scobie > >On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick(a)hotmail.com> wrote: > >> Greetings, >> Just purchased a new to me M-17, Hull # 400. I am slowly learning to >> navigate the Montgomery web sites but still have not located a source for >> Montgomery specific parts. >> At this time I don't need much and could possibly substitute if needed. >> Thanks in advance for any information >> Kevin, >> >> >> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for >> Windows 10 >> >> > > ------------------------------ Message: 6 Date: Sun, 06 May 2018 22:23:03 -0500 From: Dan Farrell <msog(a)danf.us> To: Msog List <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <0q5tocaqvg2nbfuwkm28ijxb.1525663383485(a)email.android.com> Content-Type: text/plain; charset=utf-8 Seem to have missed the key word - I need to replace the gooseneck casting for my boom. Dan Farrell M17 #301 Dan Farrell <msog(a)danf.us> wrote: >Hi all, > >Jerry - and everyone else - can you help me identify the section used for a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive. > >Any input will be most appreciated. > >Thanks, > >Dan Farrell >M17 #301 > >jerry(a)jerrymontgomery.org wrote: > >>Kevin- It looks like you have one of the 400-some 17's that I made, which >>don't have too much in common with the eeg-built boats except that they came >>out of the same molds. If you can be more specific about what parts you >>need, between Dave, Sage marine, and I, we can probably help. >> >>-----Original Message----- >>From: Dave Scobie >>Sent: Sunday, May 06, 2018 1:01 PM >>To: For and about Montgomery Sailboats >>Subject: Re: M_Boats: Montgomery Specific parts. >> >>Kevin. >> >>Most if your boat hardware is Schaefer or Garhauer. There are some custom >>parts, cleats for example, you need to find an equivalent. Jerry, >>jerry(a)jerrymontgomery.org, still has a few of the custom parts. >> >>:: Dave Scobie >> >>On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick(a)hotmail.com> wrote: >> >>> Greetings, >>> Just purchased a new to me M-17, Hull # 400. I am slowly learning to >>> navigate the Montgomery web sites but still have not located a source for >>> Montgomery specific parts. >>> At this time I don't need much and could possibly substitute if needed. >>> Thanks in advance for any information >>> Kevin, >>> >>> >>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for >>> Windows 10 >>> >>> >> >> ------------------------------ Message: 7 Date: Mon, 07 May 2018 03:23:10 +0000 From: Dave Scobie <scoobscobie(a)gmail.com> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <CAGjBOA7Cw781DavVxnpp7dsWiu22QJzX4X_PZEfyfAKrAix8jA(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Dan. You can't a 100% the same as the extrusion is no longer available. Closest is Dwyer's DM 6. It is freight shipping from the northeast ... Be ready for that sticker shock! More details in this linked PDF - http://msogphotosite.com/Scripts/Information/downloaddocument.php?id=199 :: Dave Scobie On Sun, May 6, 2018, 7:06 PM Dan Farrell <msog(a)danf.us> wrote: > Hi all, > > Jerry - and everyone else - can you help me identify the section used for > a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive. > > Any input will be most appreciated. > > Thanks, > > Dan Farrell > M17 #301 > > jerry(a)jerrymontgomery.org wrote: > > >Kevin- It looks like you have one of the 400-some 17's that I made, which > >don't have too much in common with the eeg-built boats except that they > came > >out of the same molds. If you can be more specific about what parts you > >need, between Dave, Sage marine, and I, we can probably help. > > > >-----Original Message----- > >From: Dave Scobie > >Sent: Sunday, May 06, 2018 1:01 PM > >To: For and about Montgomery Sailboats > >Subject: Re: M_Boats: Montgomery Specific parts. > > > >Kevin. > > > >Most if your boat hardware is Schaefer or Garhauer. There are some custom > >parts, cleats for example, you need to find an equivalent. Jerry, > >jerry(a)jerrymontgomery.org, still has a few of the custom parts. > > > >:: Dave Scobie > > > >On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick(a)hotmail.com> > wrote: > > > >> Greetings, > >> Just purchased a new to me M-17, Hull # 400. I am slowly learning to > >> navigate the Montgomery web sites but still have not located a source > for > >> Montgomery specific parts. > >> At this time I don't need much and could possibly substitute if needed. > >> Thanks in advance for any information > >> Kevin, > >> > >> > >> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for > >> Windows 10 > >> > >> > > > > > ------------------------------ Message: 8 Date: Mon, 07 May 2018 03:43:07 +0000 From: Dave Scobie <scoobscobie(a)gmail.com> To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <CAGjBOA4-BCrDt-c0Ub=SM8SOjgg-eincb_1EtueqBTrkrt_cxQ(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Dan. Need to see if Jerry has any old boomends laying around. The boom, like the mast, for the old boats is no longer available. How badly is it broken? Picture will help in diagnosis of solutions. :: Dave Scobie On Sun, May 6, 2018, 8:40 PM Dan Farrell <msog(a)danf.us> wrote: > Seem to have missed the key word - I need to replace the gooseneck casting > for my boom. > > Dan Farrell > M17 #301 > > Dan Farrell <msog(a)danf.us> wrote: > > >Hi all, > > > >Jerry - and everyone else - can you help me identify the section used for > a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive. > > > >Any input will be most appreciated. > > > >Thanks, > > > >Dan Farrell > >M17 #301 > > > >jerry(a)jerrymontgomery.org wrote: > > > >>Kevin- It looks like you have one of the 400-some 17's that I made, > which > >>don't have too much in common with the eeg-built boats except that they > came > >>out of the same molds. If you can be more specific about what parts you > >>need, between Dave, Sage marine, and I, we can probably help. > >> > >>-----Original Message----- > >>From: Dave Scobie > >>Sent: Sunday, May 06, 2018 1:01 PM > >>To: For and about Montgomery Sailboats > >>Subject: Re: M_Boats: Montgomery Specific parts. > >> > >>Kevin. > >> > >>Most if your boat hardware is Schaefer or Garhauer. There are some > custom > >>parts, cleats for example, you need to find an equivalent. Jerry, > >>jerry(a)jerrymontgomery.org, still has a few of the custom parts. > >> > >>:: Dave Scobie > >> > >>On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick(a)hotmail.com> > wrote: > >> > >>> Greetings, > >>> Just purchased a new to me M-17, Hull # 400. I am slowly learning to > >>> navigate the Montgomery web sites but still have not located a source > for > >>> Montgomery specific parts. > >>> At this time I don't need much and could possibly substitute if needed. > >>> Thanks in advance for any information > >>> Kevin, > >>> > >>> > >>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for > >>> Windows 10 > >>> > >>> > >> > >> > ------------------------------ Message: 9 Date: Mon, 7 May 2018 03:49:24 +0000 (UTC) From: Tyler Heerwagen <theerwagen(a)yahoo.com> To: For and About Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Subject: M_Boats: Montgomery 17 for Sale by owner - SF Bay area Message-ID: <1691352728.518564.1525664965202(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" I have too many boats, and am going to put Seranita up for sale, our Tall Rig Montgomery 17.She features most significantly a <10 hours 2017 5HP Mercury Sail Power outboard motor, and a new bottom job by Grand Marina. Bottom was fine but I could not bear to pass her on in less that top condition. See attached for a description of Seranita, and links below for 360 views of the vessel. You can scroll around, up and down, and even zoom in in these roundme.com photos, compatible? with your mobile device. Also attached are 5 photos of Seranita from this evening on the trailer.Tyler 1977 M-17 #232Tall RigNew Mercury "Sail Power" Outboard, 5HPNew bottom job$8900.00 https://roundme.com/tour/269168/view/819883/ https://roundme.com/tour/269165/view/819873/

2 1

Montgomery 17 for Sale by owner - SF Bay area
by Tyler Heerwagen 06 May '18

06 May '18

I have too many boats, and am going to put Seranita up for sale, our Tall Rig Montgomery 17.She features most significantly a <10 hours 2017 5HP Mercury Sail Power outboard motor, and a new bottom job by Grand Marina. Bottom was fine but I could not bear to pass her on in less that top condition. See attached for a description of Seranita, and links below for 360 views of the vessel. You can scroll around, up and down, and even zoom in in these roundme.com photos, compatible with your mobile device. Also attached are 5 photos of Seranita from this evening on the trailer.Tyler 1977 M-17 #232Tall RigNew Mercury "Sail Power" Outboard, 5HPNew bottom job$8900.00 https://roundme.com/tour/269168/view/819883/ https://roundme.com/tour/269165/view/819873/

1 0

Re: M_Boats: Montgomery Specific parts.
by Dan Farrell 06 May '18

06 May '18

Hi all, Jerry - and everyone else - can you help me identify the section used for a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive. Any input will be most appreciated. Thanks, Dan Farrell M17 #301 jerry(a)jerrymontgomery.org wrote: >Kevin- It looks like you have one of the 400-some 17's that I made, which >don't have too much in common with the eeg-built boats except that they came >out of the same molds. If you can be more specific about what parts you >need, between Dave, Sage marine, and I, we can probably help. > >-----Original Message----- >From: Dave Scobie >Sent: Sunday, May 06, 2018 1:01 PM >To: For and about Montgomery Sailboats >Subject: Re: M_Boats: Montgomery Specific parts. > >Kevin. > >Most if your boat hardware is Schaefer or Garhauer. There are some custom >parts, cleats for example, you need to find an equivalent. Jerry, >jerry(a)jerrymontgomery.org, still has a few of the custom parts. > >:: Dave Scobie > >On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick(a)hotmail.com> wrote: > >> Greetings, >> Just purchased a new to me M-17, Hull # 400. I am slowly learning to >> navigate the Montgomery web sites but still have not located a source for >> Montgomery specific parts. >> At this time I don't need much and could possibly substitute if needed. >> Thanks in advance for any information >> Kevin, >> >> >> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for >> Windows 10 >> >> > >

2 1