- USR-TC - mailman.xmission.com

Re: (usr-tc) R2 and PRI problem
by Ray Whelan 05 Jan '00

05 Jan '00

Hi Jorge, If you are talking about E1/PRI do the following, Install the E1/PRI version via TCM, Go to the DSP CLI >chdev span >cmd rd (Default) >cmd sv (save) > re (Reset) Ask the following questions from your Telco provider Frame type Set ltype = E1 or CRC E1 Switch type Set Swtype = ictr4 (Euro ISDN) or VN4 (France) Line coding is set to HDB3 Make sure your Sigmode is also set to message oriented (Default) Ray W "Jorge Lozano" <jorge(a)andinet.com> on 04/01/2000 22:40:42 Please respond to usr-tc(a)lists.xmission.com Sent by: "Jorge Lozano" <jorge(a)andinet.com> To: usr-tc(a)xmission.com cc: (Ray Whelan/IE/3Com) Subject: (usr-tc) R2 and PRI problem -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everybody! I have a TCH with Hiper DSP cards, they are working correctly with R2, but I want to make to them work with PRI lines. if somebody know what is the procedure.... can help me? Maybe... the answer is very easy, but I am a newbie in this. Thanks for all. Jorge Lozano M. -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com> iQA/AwUBOHJ26ap3oywyFVUlEQIWlwCg0VmR6YcInE/JI6BvVzPJNtip104AnApv wzbbUDD3WUVI33xA5Ue6wYFm =HnLd -----END PGP SIGNATURE-----

2 1

(usr-tc) Dedicated IP pools
by Cheryl Johnson 05 Jan '00

05 Jan '00

hello usr list fans...I got another project I am not sure how to set up. I am trying to set up a dedicated <private> pool for only specific users to use for a somewhat called dedicated modem. Now the problem is I set up two different pools one for public and one for private but only the public and be accessed. Using a T1, how do you set this up? Any ideas, please reply. Thanks, -C

2 2

(usr-tc) R2 and PRI problem
by Jorge Lozano 04 Jan '00

04 Jan '00

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everybody! I have a TCH with Hiper DSP cards, they are working correctly with R2, but I want to make to them work with PRI lines. if somebody know what is the procedure.... can help me? Maybe... the answer is very easy, but I am a newbie in this. Thanks for all. Jorge Lozano M. -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com> iQA/AwUBOHJ26ap3oywyFVUlEQIWlwCg0VmR6YcInE/JI6BvVzPJNtip104AnApv wzbbUDD3WUVI33xA5Ue6wYFm =HnLd -----END PGP SIGNATURE-----

1 0

RE: (usr-tc) radius attribute 0x988b (39051)
by Scott Boggs 04 Jan '00

04 Jan '00

There are some docs on 3com VSAs in the HiperArc Product ref. Appendix E Scott Boggs AccessUnited ISP Operations > -----Original Message----- > From: Clayton Zekelman [SMTP:clayton@MNSi.Net] > Sent: Tuesday, January 04, 2000 10:29 AM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) radius attribute 0x988b (39051) > > I tried the 3Com knowledge base, searching for VSA and Vendor Specific > Attribute, but came up with zip. > > Lucent keeps an up to date dictionary available on their site > (ftp.livingston.com) but it only includes the LE VSA's. I really wish > 3Com would do that too. > > > > At 02:03 PM 12/23/99 -0500, you wrote: > > > > Does someone know what this attribute is? Name, and type (integer, > >string, etc..) would be very helpful. > > > > Also, does USR have a difinitive radius attribute > >dictonary that they distribute? I can't find one on > >totalservice or lying around either. > > > > Thanks. > > > > - Jared > > > >-- > >Jared Mauch | pgp key available via finger from jared(a)puck.nether.net > >clue++; | http://puck.nether.net/~jared/ My statements are only > mine. > >END OF LINE | > > > > > >- > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > --- > Clayton Zekelman > Managed Network Systems Inc. (MNSi) > 875 Ouellette Avenue > Windsor, Ontario > N9A 4J6 > > tel. 519-985-8410 > fax. 519-258-3009 > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Total Control Enterprise Network Hub
by Greg Long 04 Jan '00

04 Jan '00

I've got another question for everyone. Does anyone have the part number for a fan or the fan tray that would fit a USRobotics Total Control Enterprise Network Hub with 17 slots and 2 psu slots, or is anyone selling one? Thanks, Greg Long Tech Support Coastlink 801-532-6212 ext 32 techsupp(a)coastlink.com http://www.coastlink.com -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Greg Long Sent: Tuesday, January 04, 2000 9:21 AM To: usr-tc(a)lists.xmission.com Subject: RE: (usr-tc) Total Control Enterprise Network Hub Hey thanks! That was the problem. Temp still looks good. I have two fans in the room to keep the air moving so it stays cool. -Greg -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Blake Fithen Sent: Monday, January 03, 2000 6:36 PM To: 'usr-tc(a)lists.xmission.com'; usr-tc(a)xmission.com Subject: RE: (usr-tc) Total Control Enterprise Network Hub Make sure all the fans are spinning. blake > -----Original Message----- > From: Greg Long [mailto:greg@coastlink.com] > Sent: Monday, January 03, 2000 6:58 PM > To: usr-tc(a)xmission.com > Subject: (usr-tc) Total Control Enterprise Network Hub > > > Hello! > > I've got a Total Control Enterprise Network Hub that has a > red "Hub Status" > light on the Network Management Card. I tried doing a > software reset and > shutting it down and powering it back on but the light pops > back to red > after about 30 seconds. I can't find anything wrong with it, > it is still > sending and receiving information. My callers haven't > complained about low > bandwidth or inability to do anything. According to the > manual it is a > Critical Chassis Failure. What do I need to do to the box to > make the green > light come back? Any help would be greatly appreciated! > > Thanks, > Greg Long > Tech Support > Coastlink > 801-532-6212 ext 32 > techsupp(a)coastlink.com > http://www.coastlink.com > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) DSP 2.0.51
by Scot Desort 04 Jan '00

04 Jan '00

Anybody running 2.0.51 on their DSP's -- I have some .54 rev boards which, so far as I can tell, are exhibiting no unusual problems. But the release notes on 2.0.51 indicates it should be used on both .54 and .55 boards. I have noticed a slight increase in Rockwell problems since I turned these 2 cards up, and there are 1 or 2 Rockwell fixes in this release. Any thoughts? -- Scot Desort NJ Internet Access - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) S/A Server is crashing
by K Mitchell 04 Jan '00

04 Jan '00

At 05:03 PM 1/3/00 -0700, Jim Faulkner wrote: >I had the exact same problem with version 5.5.3. It would run great for >months and the crash several times on three servers simultaneously. I was >never ever able to find a cause. I got a copy of ServersAlive which would >monitor the radius server and then kill Dr Watson when there was a crash and >restart the Radius server. Very messy but it got me by. I've since installed >a 6.0 version and haven't seen the problem again but it's only been about >three weeks so I'm still holding my breath. I've been running 6.0.90 for about 3 months with no problems. If you're running it on Access '97, you may also want to make sure it's upgraded to SP2, that's the "Y2K Compliant" version. -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Total Control Enterprise Network Hub
by Greg Long 04 Jan '00

04 Jan '00

Hey thanks! That was the problem. Temp still looks good. I have two fans in the room to keep the air moving so it stays cool. -Greg -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Blake Fithen Sent: Monday, January 03, 2000 6:36 PM To: 'usr-tc(a)lists.xmission.com'; usr-tc(a)xmission.com Subject: RE: (usr-tc) Total Control Enterprise Network Hub Make sure all the fans are spinning. blake > -----Original Message----- > From: Greg Long [mailto:greg@coastlink.com] > Sent: Monday, January 03, 2000 6:58 PM > To: usr-tc(a)xmission.com > Subject: (usr-tc) Total Control Enterprise Network Hub > > > Hello! > > I've got a Total Control Enterprise Network Hub that has a > red "Hub Status" > light on the Network Management Card. I tried doing a > software reset and > shutting it down and powering it back on but the light pops > back to red > after about 30 seconds. I can't find anything wrong with it, > it is still > sending and receiving information. My callers haven't > complained about low > bandwidth or inability to do anything. According to the > manual it is a > Critical Chassis Failure. What do I need to do to the box to > make the green > light come back? Any help would be greatly appreciated! > > Thanks, > Greg Long > Tech Support > Coastlink > 801-532-6212 ext 32 > techsupp(a)coastlink.com > http://www.coastlink.com > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) radius attribute 0x988b (39051)
by Jared Mauch 04 Jan '00

04 Jan '00

Does someone know what this attribute is? Name, and type (integer, string, etc..) would be very helpful. Also, does USR have a difinitive radius attribute dictonary that they distribute? I can't find one on totalservice or lying around either. Thanks. - Jared -- Jared Mauch | pgp key available via finger from jared(a)puck.nether.net clue++; | http://puck.nether.net/~jared/ My statements are only mine. END OF LINE | - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

Re: (usr-tc) Total Control Enterprise Network Hub
by Steve Valiunas 04 Jan '00

04 Jan '00

The NMC can be queried to tell you the reason for the Hub-Status light being red- It's under Performance Monitor / FuncGroup=FailureReasons / Parm=HubStatusRed. This is available on TCS3.5 and later codes (nmc ver 6.x.x). It might be a high temperature, a card being reset, some kind of non-critical failure on the NMC, a bad PSU... The oldstyle chassis with the fan in the back has a sensor for the single fan, and the newer-style chassis with the built-in fan tray will report failures for the tray. You probably won't get anything for the older add-on fan tray though. Steve valiunas Jeff Mcadams <jeffm(a)iglou.com> on 01/04/2000 06:59:42 AM Please respond to usr-tc(a)lists.xmission.com Sent by: Jeff Mcadams <jeffm(a)iglou.com> To: usr-tc(a)lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: Re: (usr-tc) Total Control Enterprise Network Hub Thus spake Stephen Amadei >On Mon, 3 Jan 2000, Jeff Mcadams wrote: >> Walk the uchasPowerSupplyTable for information about the power supplies, >> and, unfortunately, it seems that there is no OID to find out about fan >> failures...3Com, is there a possibility that this can be added? >> Obviously, they are instrumented as you can get traps on fan failures >> and auto-response scripts for fan failures... >Aren't the fans in the fantray two wire? I don't think two wire fans >can be tested for failure, like the new three wire PC chassis and CPU >fans. Dunno...haven't checked that closely...but I do know that there is a trap enable for fan failures, as well as an auto-response script, so I'm pretty sure they are instrumented. I'll pull a fan tray to see if I can tell if I think about it today. -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1