- USR-TC - mailman.xmission.com

RE: (usr-tc) IAS accounting problem with HiperArc
by USRobotics TC Mailing List 10 Jan '00

10 Jan '00

That's the first thing I did when I ran into the problem. I even verified the secrets on the HipeArc using the _show accounting radius secret. Anyone have any other suggestions? Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820 -----Original Message----- From: Steve Valiunas [mailto:Steve_Valiunas@mw.3com.com] Sent: Monday, January 10, 2000 8:44 AM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) IAS accounting problem with HiperArc Check your secondary-server's shared secret. STeve Valiunas USRobotics TC Mailing List <USRoboticsTCMailingList(a)imagenisp.com> on 01/09/2000 03:01:53 PM Please respond to usr-tc(a)lists.xmission.com Sent by: USRobotics TC Mailing List <USRoboticsTCMailingList(a)imagenisp.com> To: "USRobotics TC Mailing List cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) IAS accounting problem with HiperArc I am having a problem with my HiperArc and accounting using Microsoft IAS. I have my first accounting server specified as the primary accounting server, and everything is working fine as is. The problem I'm having is related to my second server, which I intend to use as a backup in case the first one goes down. When my second server is set as the secondary server, everything works okay. However, when I have my second server set as the primary first backup, no accounting records are recorded and the NT event log is full of malformed packets. What is different about the packets when they are sent to the server configured as the primary first backup versus the secondary? My other chassis which runs a NSC has no problem at all with the second server. Thanks for your help. Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) changing IP pool
by Justin 10 Jan '00

10 Jan '00

Kirk, You need to add an address from the subnet of the pool that you added to the ethernet interface of the HiperArc that doles out those ip's. For instance, if you added a pool of size 200, starting address 192.168.1.10, you would need to add an unused IP from that range to the ethernet port of the hiperArc; ie: "add ip network somename address 192.168.1.2 interface eth:1 enabled yes". Of course, you would need 192.168.1.1 (or other unassigned IP from that range) assigned to the corresponding interface on your Cisco to complete the route. HTH, Justin >I was able to get the new pool in over the weekend with Krish's help, but >the ARC isn't routing to the new pool. Apparently I'm missing something. > > >-- >Kirk Mitchell-General Manager mitch(a)keyconn.net >Keystone Connect Unlock Your World >Altoona, PA 814-941-5000 http://www.keyconn.net > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

Re: (usr-tc) IAS accounting problem with HiperArc
by Steve Valiunas 10 Jan '00

10 Jan '00

Check your secondary-server's shared secret. STeve Valiunas USRobotics TC Mailing List <USRoboticsTCMailingList(a)imagenisp.com> on 01/09/2000 03:01:53 PM Please respond to usr-tc(a)lists.xmission.com Sent by: USRobotics TC Mailing List <USRoboticsTCMailingList(a)imagenisp.com> To: "USRobotics TC Mailing List cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) IAS accounting problem with HiperArc I am having a problem with my HiperArc and accounting using Microsoft IAS. I have my first accounting server specified as the primary accounting server, and everything is working fine as is. The problem I'm having is related to my second server, which I intend to use as a backup in case the first one goes down. When my second server is set as the secondary server, everything works okay. However, when I have my second server set as the primary first backup, no accounting records are recorded and the NT event log is full of malformed packets. What is different about the packets when they are sent to the server configured as the primary first backup versus the secondary? My other chassis which runs a NSC has no problem at all with the second server. Thanks for your help. Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820

1 0

(usr-tc) changing IP pool
by K Mitchell 10 Jan '00

10 Jan '00

I want to change the IP pool on my chassis from one class C to another one, while leaving the ARC and NMC with their original IPs from the first class C. Will simply resetting the IP pool in ARC work ok, or do I need to make any special provisions for the changeover? Will the ARC still route to the old addresses on current calls? Thanks, -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

(usr-tc) IAS accounting problem with HiperArc
by USRobotics TC Mailing List 09 Jan '00

09 Jan '00

I am having a problem with my HiperArc and accounting using Microsoft IAS. I have my first accounting server specified as the primary accounting server, and everything is working fine as is. The problem I'm having is related to my second server, which I intend to use as a backup in case the first one goes down. When my second server is set as the secondary server, everything works okay. However, when I have my second server set as the primary first backup, no accounting records are recorded and the NT event log is full of malformed packets. What is different about the packets when they are sent to the server configured as the primary first backup versus the secondary? My other chassis which runs a NSC has no problem at all with the second server. Thanks for your help. Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820

1 0

(usr-tc) Re: Net Server Y2K compliance
by Kevin Benton 08 Jan '00

08 Jan '00

On Fri, 7 Jan 2000, Ivan Baby wrote: > You are correct with your assessment of the Y2K status of NetServer 3.8.1. > NetServer 3.8.1 is compliant through the year 2035. NetServer does not maintain > its own clock but is dependent on an NTP server for the time. Has anyone asked > the customer to display the time on their NTP server to see if it is correct? If this is true, then why does a show time show a date of something in 1900 on both NetServers we're using? Why is the clock so far off? How can I get it set properly? My ARC's are doing just fine with NTP. NTP is being served by a local Linux box which is itself served by Ohio State University and Washington State University time servers (with a maximum 30 second difference) once every 24 hours. Are you saying my NTP is broken? E-Mail: s1kevin(a)tims.net Web: http://users.sota-oh.com/~s1kevin/ Unsolicited advertisements processing fee: $50 subject to change without notice - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 4

(usr-tc) hawho
by Jeremy Gault 08 Jan '00

08 Jan '00

Hi, Has anyone noticed that ever since Y2K, everyone shows up as being online for 0 minutes in hawho? I'm not sure how many people here use hawho, but I am sure some do. Does anyone know of a fix for this? Right now when we list our users, it shows everyone as being connected for 0 minutes. Any help would be appreciated. Jeremy Jeremy Gault Systems Administrator - WingNET Internet Services http://www.wingnet.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 4

RE: (usr-tc) cisco 804 to total-control hiperarc
by Blake Fithen 08 Jan '00

08 Jan '00

not sure whats going on there but we have the same setup except DSP's instead of quads. never have problems with the 800's. here's my configs - the ppp auth. config on the Cisco is a little wierd but thats the only way I could get auth. requests answered by the ARC. Hope this helps!!!!!! Current configuration: ! version 12.0 no service pad service timestamps debug datetime msec localtime show-timezone service timestamps log datetime localtime show-timezone service password-encryption ! hostname xxx ! username xxx password yyy ! ip subnet-zero ! isdn switch-type basic-ni ! interface Ethernet0 ip address 10.0.0.80 255.255.255.0 no ip directed-broadcast ip nat inside no cdp enable ! interface BRI0 no ip address no ip directed-broadcast ip nat outside encapsulation ppp dialer rotary-group 1 isdn switch-type basic-ni isdn spid1 xxxxxxxxxxxxxx xxxxxxx isdn voice-priority xxxxxxx in always isdn incoming-voice modem no cdp enable ! interface Dialer1 description ISP ip address negotiated no ip directed-broadcast no ip proxy-arp ip nat outside encapsulation ppp no ip split-horizon dialer in-band dialer idle-timeout 9000 dialer string xxxxxxx dialer load-threshold 1 either dialer-group 1 no cdp enable ppp authentication pap callin ppp chap password yyy ppp pap sent-username xxx password yyy ppp multilink ! ip nat inside source list 1 interface Dialer1 overload ip http server ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 ! access-list 1 permit 10.0.0.0 0.0.0.255 dialer-list 1 protocol ip permit no cdp run ! line con 0 exec-timeout 0 0 transport input none stopbits 1 line vty 0 4 password yyy login ! end tpk-32.7> sh ppp PPP AUTHENTICATION DIAL_IN Users Authenticate: PAP PPP Authentication Preference: DEFAULT System Transmit Authentication Name: xxxx PPP offloading: DISABLED CCP will be attempted for call type(s): NONE Primary NBNS Server address: 0.0.0.0 Secondary NBNS Server address: 0.0.0.0 DNS configuration Usage: SYSTEM Primary PPP DNS Server address: 0.0.0.0 Secondary PPP DNS Server address: 0.0.0.0 PPP session start message: PPP session from %server_ip to %client _ip beginning.... Send Accounting for PPP Abnormal Disc: DISABLED PPP Address Field Compression: ENABLED PPP Protocol Field Compression: ENABLED PPP Multilink PPP: ENABLED PPP BACP and BAP: DISABLED PPP Bap Hunt Group Phone Number: PPP Receive ACCM: DISABLED > -----Original Message----- > From: Laszlo Vecsey [mailto:master@internexus.net] > Sent: Friday, January 07, 2000 9:39 PM > To: usr-tc(a)xmission.com > Subject: (usr-tc) cisco 804 to total-control hiperarc > > > > I have a customer attempting to dial up with an isdn cisco > 804 unit, to a > total control hiperarc (quad modems). The connection is > established and I > see the authentication show up in the radius server log, but then the > connection gets dropped. The user and pass is accepted ok. > > I monitored the ppp call events on the hiperarc, and as the > call comes in > it says almost instantly that the Peer does not have any IP > protocol set, > so DISABLING. Any idea why that might be? > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) cisco 804 to total-control hiperarc
by Laszlo Vecsey 07 Jan '00

07 Jan '00

I have a customer attempting to dial up with an isdn cisco 804 unit, to a total control hiperarc (quad modems). The connection is established and I see the authentication show up in the radius server log, but then the connection gets dropped. The user and pass is accepted ok. I monitored the ppp call events on the hiperarc, and as the call comes in it says almost instantly that the Peer does not have any IP protocol set, so DISABLING. Any idea why that might be? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Re..(My Bad) init string
by Greg owens 07 Jan '00

07 Jan '00

Thanks....I actually hooked up another Gateway identical to the one yesterday (The new one that has monitor, hard drive etc all in one chassis) today and their modem worked great. I'm beginning to believe that old MaBell has struck again with another crummy phone line. But appreciate the link Greg Owens Magnolia Internet Services http://www.magnolia-net.com ----- Original Message ----- From: Greg Long To: usr-tc(a)lists.xmission.com Sent: Friday, January 07, 2000 11:49 AM Subject: RE: (usr-tc) (My Bad) init string I don't if it will have what you are looking for but here is a link to the Motorola website product specs: http://www.motorola.com/networking/products/sm56_ac-l/index.html -Greg -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Greg owens Sent: Thursday, January 06, 2000 7:41 PM To: usr-tc(a)lists.xmission.com Subject: (usr-tc) (My Bad) init string Sorry...My Bad...Its a Motorola SM56 AC-L Modem I need init string for.....Thanks Greg Owens Magnolia Internet Services http://www.magnolia-net.com Greg Owens Magnolia Internet Services http://www.magnolia-net.com

1 0