February 2005 - USR-TC - mailman.xmission.com

Anybody sitting on Qty 33.6 Stand alone Sportsters?
by Stephen Rivera - WRCA.Net 26 May '05

26 May '05

Looking for Qty Purchase. If you have some to move please contact me at steverivera(a)wrca.net Sportster 33.6 standalone with power. Thanks. Also looking to buy older 486 EdgeSever cards. NAC alone is fine. Steve Rivera WR Consultant Associates, Inc. Dir: 732-833-2111 x102 IM: srivera711 www.wrca.net Providing Network Hardware Since 1981.

2 1

RE: [USR-TC] Error using 2-HiPer DSP Cards
by Kirti S. Bajwa 26 Feb '05

26 Feb '05

Todd: Just one setting (fas) & it did the trick. THANKS, THANKS, THANKS,.....,THANKS. Kirti -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Friday, February 25, 2005 5:34 PM To: 'Discussion relating to the 3Com/US Robotics Total Control modemsystems.' Subject: RE: [USR-TC] Error using 2-HiPer DSP Cards You need to change the span settings for all the dsp's to fas. That's the problem you're having. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com(a)mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Friday, February 25, 2005 3:13 PM To: 'Discussion relating to the 3Com/US Robotics Total Control modemsystems.' Subject: RE: [USR-TC] Error using 2-HiPer DSP Cards Hello: Please /help/. I am planning to work this weekend to solve this problem. Thanks to all again. Kirti ---------------------- Todd: Thanks for your response. Here is the information you asked for: (1) Yes, these are regular PRI (23b + 1D) (2) NMC Chassis awareness is set to "YES" (3) Other settings: HiPer ARC on Slot 15: HiPer>> show nmc settINGS NMC SETTINGS Chassis Awareness: ENABLED Dynamic Slot Assignment: ENABLED DSA Idle Rebalancing: ENABLED SNMP Forwarding: ENABLED HiPer>> list chassIS Slot Owner Description Ports Type Console 1 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 2 NO 24 Channel High Density Modem 23 DYNAMIC YES 3 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 4 NO 24 Channel High Density Modem 23 DYNAMIC YES 5 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 6 NO 24 Channel High Density Modem 23 DYNAMIC YES 7 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 8 NO 24 Channel High Density Modem 23 DYNAMIC YES 9 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 10 NO 24 Channel High Density Modem 23 DYNAMIC YES 11 YES --EMPTY-- 0 STATIC NO 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES HiPer Access Router NAC 0 DYNAMIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO HiPer ARC on Slot 16: HiPer>> show nmc seTTINGS NMC SETTINGS Chassis Awareness: ENABLED Dynamic Slot Assignment: ENABLED DSA Idle Rebalancing: ENABLED SNMP Forwarding: ENABLED HiPer>> list chassis Slot Owner Description Ports Type Console 1 NO 24 Channel High Density Modem 23 DYNAMIC YES 2 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 3 NO 24 Channel High Density Modem 23 DYNAMIC YES 4 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 5 NO 24 Channel High Density Modem 23 DYNAMIC YES 6 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 7 NO 24 Channel High Density Modem 23 DYNAMIC YES 8 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 9 NO 24 Channel High Density Modem 23 DYNAMIC YES 10 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 11 YES --EMPTY-- 0 STATIC NO 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES HiPer Access Router NAC 0 DYNAMIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO -------------------- One more thing; I looked into NMC (Manager) and looked NFAS Settings under "Hiper DSP Span Line Programmed Settings": NFAS Span D- Channel Type: dChannelPrimary Local Group Type: nfas If the above two settings makes any difference, please let me know. Thank you again. Kirti -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Thursday, February 24, 2005 3:22 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Error using 2-HiPer DSP Cards Are these regular PRI (23B +1D) that you are terminating or are they part of a NFAS group? Also....what does your chassis awareness settings look like? The way you're trying to setup the chassis is typically how I setup most/all of our chassis. I disable nmc chassis awareness and specifically assign the chassis slots which it sounds like you did. Can you post the out put of the following of BOTH of your arcs: show nmc settings list chassis Todd ----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa(a)tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc(a)mailman.xmission.com> Sent: Thursday, February 24, 2005 2:42 PM Subject: [USR-TC] Error using 2-HiPer DSP Cards > Hello: > > First thanks to all users. With your help, I am getting 3COM almost working. > Now the next problem: > > 1 - HiPer NMC > 2 - HiPer ARC > 10 - HiPer DSP > 2 - T1 ISDN PRI 23B + 1D Channels > > HiPer ARC 1 (Slot 15) controls odd numbered (1,3,5,..) HiPer DSP > Slots. HiPer ARC 1 (Slot 15) controls even numbered (2,4,6,..) HiPer > DSP Slots. > > I am testing HiPer DSP located in Slot 1 & Slot 2. First I connected > the T1 > Line into HiPer DSP on Slot 1. It worked fine. Then I moved the T1 to HiPer > DSP in Slot 2 (no T1 in Slot 1). HiPer DSP in Slot 2 also worked fine. > > Then I connected one T1 in HiPer DSP in Slot 1 and another T1 into > HiPer DSP > in Slot 2. > > Now the error: > The front panel light 'LPBK/D-ALM' on each HiPer DSP turns GREEN & > then RED. > Also, when the 'LPBK/D-ALM' light on HiPer DSP in Slot 1 is GREEN, the same > light on HiPer DSP in Slot 2 is RED & vice versa. New Users can not connect > & the one who are connected are disconnected. > > What is the problem and how to fix it? > > Kirti > > PS: If my explanation is confusing, please let me know. I will try to > clarify it. > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] Error using 2-HiPer DSP Cards
by Kirti S. Bajwa 25 Feb '05

25 Feb '05

Hello: Please /help/. I am planning to work this weekend to solve this problem. Thanks to all again. Kirti ---------------------- Todd: Thanks for your response. Here is the information you asked for: (1) Yes, these are regular PRI (23b + 1D) (2) NMC Chassis awareness is set to "YES" (3) Other settings: HiPer ARC on Slot 15: HiPer>> show nmc settINGS NMC SETTINGS Chassis Awareness: ENABLED Dynamic Slot Assignment: ENABLED DSA Idle Rebalancing: ENABLED SNMP Forwarding: ENABLED HiPer>> list chassIS Slot Owner Description Ports Type Console 1 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 2 NO 24 Channel High Density Modem 23 DYNAMIC YES 3 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 4 NO 24 Channel High Density Modem 23 DYNAMIC YES 5 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 6 NO 24 Channel High Density Modem 23 DYNAMIC YES 7 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 8 NO 24 Channel High Density Modem 23 DYNAMIC YES 9 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 10 NO 24 Channel High Density Modem 23 DYNAMIC YES 11 YES --EMPTY-- 0 STATIC NO 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES HiPer Access Router NAC 0 DYNAMIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO HiPer ARC on Slot 16: HiPer>> show nmc seTTINGS NMC SETTINGS Chassis Awareness: ENABLED Dynamic Slot Assignment: ENABLED DSA Idle Rebalancing: ENABLED SNMP Forwarding: ENABLED HiPer>> list chassis Slot Owner Description Ports Type Console 1 NO 24 Channel High Density Modem 23 DYNAMIC YES 2 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 3 NO 24 Channel High Density Modem 23 DYNAMIC YES 4 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 5 NO 24 Channel High Density Modem 23 DYNAMIC YES 6 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 7 NO 24 Channel High Density Modem 23 DYNAMIC YES 8 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 9 NO 24 Channel High Density Modem 23 DYNAMIC YES 10 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 11 YES --EMPTY-- 0 STATIC NO 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES HiPer Access Router NAC 0 DYNAMIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO -------------------- One more thing; I looked into NMC (Manager) and looked NFAS Settings under "Hiper DSP Span Line Programmed Settings": NFAS Span D- Channel Type: dChannelPrimary Local Group Type: nfas If the above two settings makes any difference, please let me know. Thank you again. Kirti -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Thursday, February 24, 2005 3:22 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Error using 2-HiPer DSP Cards Are these regular PRI (23B +1D) that you are terminating or are they part of a NFAS group? Also....what does your chassis awareness settings look like? The way you're trying to setup the chassis is typically how I setup most/all of our chassis. I disable nmc chassis awareness and specifically assign the chassis slots which it sounds like you did. Can you post the out put of the following of BOTH of your arcs: show nmc settings list chassis Todd ----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa(a)tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc(a)mailman.xmission.com> Sent: Thursday, February 24, 2005 2:42 PM Subject: [USR-TC] Error using 2-HiPer DSP Cards > Hello: > > First thanks to all users. With your help, I am getting 3COM almost working. > Now the next problem: > > 1 - HiPer NMC > 2 - HiPer ARC > 10 - HiPer DSP > 2 - T1 ISDN PRI 23B + 1D Channels > > HiPer ARC 1 (Slot 15) controls odd numbered (1,3,5,..) HiPer DSP Slots. > HiPer ARC 1 (Slot 15) controls even numbered (2,4,6,..) HiPer DSP Slots. > > I am testing HiPer DSP located in Slot 1 & Slot 2. First I connected the T1 > Line into HiPer DSP on Slot 1. It worked fine. Then I moved the T1 to HiPer > DSP in Slot 2 (no T1 in Slot 1). HiPer DSP in Slot 2 also worked fine. > > Then I connected one T1 in HiPer DSP in Slot 1 and another T1 into HiPer DSP > in Slot 2. > > Now the error: > The front panel light 'LPBK/D-ALM' on each HiPer DSP turns GREEN & then RED. > Also, when the 'LPBK/D-ALM' light on HiPer DSP in Slot 1 is GREEN, the same > light on HiPer DSP in Slot 2 is RED & vice versa. New Users can not connect > & the one who are connected are disconnected. > > What is the problem and how to fix it? > > Kirti > > PS: If my explanation is confusing, please let me know. I will try to > clarify it. > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

3 2

hiper arc codes
by Gerald Jaya 25 Feb '05

25 Feb '05

Can anyone help me with a code version that can support analog calls using analog/dig quads. I have a TC with 15 analog/dig quads and I am trying to setup the box up for analog connectivity. Regards Gerald.

1 0

RE: [USR-TC] Error using 2-HiPer DSP Cards
by Kirti S. Bajwa 24 Feb '05

24 Feb '05

Todd: Thanks for your response. Here is the information you asked for: (1) Yes, these are regular PRI (23b + 1D) (2) NMC Chassis awareness is set to "YES" (3) Other settings: HiPer ARC on Slot 15: HiPer>> show nmc settINGS NMC SETTINGS Chassis Awareness: ENABLED Dynamic Slot Assignment: ENABLED DSA Idle Rebalancing: ENABLED SNMP Forwarding: ENABLED HiPer>> list chassIS Slot Owner Description Ports Type Console 1 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 2 NO 24 Channel High Density Modem 23 DYNAMIC YES 3 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 4 NO 24 Channel High Density Modem 23 DYNAMIC YES 5 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 6 NO 24 Channel High Density Modem 23 DYNAMIC YES 7 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 8 NO 24 Channel High Density Modem 23 DYNAMIC YES 9 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 10 NO 24 Channel High Density Modem 23 DYNAMIC YES 11 YES --EMPTY-- 0 STATIC NO 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES HiPer Access Router NAC 0 DYNAMIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO HiPer ARC on Slot 16: HiPer>> show nmc seTTINGS NMC SETTINGS Chassis Awareness: ENABLED Dynamic Slot Assignment: ENABLED DSA Idle Rebalancing: ENABLED SNMP Forwarding: ENABLED HiPer>> list chassis Slot Owner Description Ports Type Console 1 NO 24 Channel High Density Modem 23 DYNAMIC YES 2 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 3 NO 24 Channel High Density Modem 23 DYNAMIC YES 4 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 5 NO 24 Channel High Density Modem 23 DYNAMIC YES 6 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 7 NO 24 Channel High Density Modem 23 DYNAMIC YES 8 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 9 NO 24 Channel High Density Modem 23 DYNAMIC YES 10 ASSIGNED 24 Channel High Density Modem 23 DYNAMIC YES 11 YES --EMPTY-- 0 STATIC NO 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES HiPer Access Router NAC 0 DYNAMIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO -------------------- One more thing; I looked into NMC (Manager) and looked NFAS Settings under "Hiper DSP Span Line Programmed Settings": NFAS Span D- Channel Type: dChannelPrimary Local Group Type: nfas If the above two settings makes any difference, please let me know. Thank you again. Kirti -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Thursday, February 24, 2005 3:22 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Error using 2-HiPer DSP Cards Are these regular PRI (23B +1D) that you are terminating or are they part of a NFAS group? Also....what does your chassis awareness settings look like? The way you're trying to setup the chassis is typically how I setup most/all of our chassis. I disable nmc chassis awareness and specifically assign the chassis slots which it sounds like you did. Can you post the out put of the following of BOTH of your arcs: show nmc settings list chassis Todd ----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa(a)tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc(a)mailman.xmission.com> Sent: Thursday, February 24, 2005 2:42 PM Subject: [USR-TC] Error using 2-HiPer DSP Cards > Hello: > > First thanks to all users. With your help, I am getting 3COM almost working. > Now the next problem: > > 1 - HiPer NMC > 2 - HiPer ARC > 10 - HiPer DSP > 2 - T1 ISDN PRI 23B + 1D Channels > > HiPer ARC 1 (Slot 15) controls odd numbered (1,3,5,..) HiPer DSP Slots. > HiPer ARC 1 (Slot 15) controls even numbered (2,4,6,..) HiPer DSP Slots. > > I am testing HiPer DSP located in Slot 1 & Slot 2. First I connected the T1 > Line into HiPer DSP on Slot 1. It worked fine. Then I moved the T1 to HiPer > DSP in Slot 2 (no T1 in Slot 1). HiPer DSP in Slot 2 also worked fine. > > Then I connected one T1 in HiPer DSP in Slot 1 and another T1 into HiPer DSP > in Slot 2. > > Now the error: > The front panel light 'LPBK/D-ALM' on each HiPer DSP turns GREEN & then RED. > Also, when the 'LPBK/D-ALM' light on HiPer DSP in Slot 1 is GREEN, the same > light on HiPer DSP in Slot 2 is RED & vice versa. New Users can not connect > & the one who are connected are disconnected. > > What is the problem and how to fix it? > > Kirti > > PS: If my explanation is confusing, please let me know. I will try to > clarify it. > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

Error using 2-HiPer DSP Cards
by Kirti S. Bajwa 24 Feb '05

24 Feb '05

Hello: First thanks to all users. With your help, I am getting 3COM almost working. Now the next problem: 1 - HiPer NMC 2 - HiPer ARC 10 - HiPer DSP 2 - T1 ISDN PRI 23B + 1D Channels HiPer ARC 1 (Slot 15) controls odd numbered (1,3,5,..) HiPer DSP Slots. HiPer ARC 1 (Slot 15) controls even numbered (2,4,6,..) HiPer DSP Slots. I am testing HiPer DSP located in Slot 1 & Slot 2. First I connected the T1 Line into HiPer DSP on Slot 1. It worked fine. Then I moved the T1 to HiPer DSP in Slot 2 (no T1 in Slot 1). HiPer DSP in Slot 2 also worked fine. Then I connected one T1 in HiPer DSP in Slot 1 and another T1 into HiPer DSP in Slot 2. Now the error: The front panel light 'LPBK/D-ALM' on each HiPer DSP turns GREEN & then RED. Also, when the 'LPBK/D-ALM' light on HiPer DSP in Slot 1 is GREEN, the same light on HiPer DSP in Slot 2 is RED & vice versa. New Users can not connect & the one who are connected are disconnected. What is the problem and how to fix it? Kirti PS: If my explanation is confusing, please let me know. I will try to clarify it.

2 1

RE: [USR-TC] ds0 service states
by Adam Barnhill 23 Feb '05

23 Feb '05

Check your cables. I've never seen a bad cable put trunks in Maintenance mode, but I have seen it cause LOOS and ROOS. Other than that, the trunk behavior temporarily going in and then out again is fairly common of a bad cable. -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Todd Bertolozzi Sent: Wednesday, February 23, 2005 10:57 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] ds0 service states I'm working on an issue that maybe someone else on the list has come across regarding ds0 service states. I might have even posted a question similar to this a long time back. Basically on some Hiper DSP's I'm getting some ds0's that are NOT in a "inService" state. It varies on which state they'll be in. Some are in maintenance mode, some are local out of service and others are remote out of service. And of course some are working properly and taking calls. If I busy the ds0's out (either soft or hard) and then restore them, they will come back to a normal "inService" state temporarily, and then eventually go back to one of the out of service states. I have more then 1 chassis at this site and it appears (have not thoroughly verified yet) that these issues do not occur on all the chassis. Infact it appears that possibly the only thing in common is that the cards that are experiencing this terminate into the same muxed DS3. The telco has no clue and is looking to me for answers. Anyone have any experience with this type of issue and could possibly offer some suggestions? Thanks in advance, Todd _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

User not in table!!!
by Kirti S. Bajwa 23 Feb '05

23 Feb '05

Hello: I am testing a 3COM box and have setup a HiPer DSP. It answers the user dial-in calls. I watch the connections & delete those users who are logged in more than couple of hours. I use the following commands: Hiper>> list connections Hiper>> delete user xxxxx When I try to delete a user 'xxxxx', I get an error message: DELETE USER failed because the item is not in the table (or very similar message) I display the list again and sure enough the user is logged on. I have checked the user name but the error keeps on happening. What causes this error and how to fix it? Thanks in advance. Kirti

3 3

WTB: 130A DC power sets
by Stephen Rivera - WRCA.Net 22 Feb '05

22 Feb '05

Anybody have any of these power sets to sell? I have an immediate need for a fellow TC1000 user. If you do have some any available please contact me. PSU & PSI 130A DC steverivera(a)wrca.net

1 0

TC 1000 Configuration
by Russell Newberry 21 Feb '05

21 Feb '05

Hi guys, An international friend of mine is having some issues with a TC 1000 unit...any advice would help. He has Qty 15 Analog/Digital modems, with a Netserver PRI and NMC. Here is what he wrote: "Please advice to how can configure it for dial in connection .. I can configure it for answer modem, modem didnt answer .. and how can I configure it for radiuse server .. you most know I have not E1,T1, any ISDN I just have analog phone line ...I have any user guide and just searching internet .. I built a consol port for it and don't know password of netserver and I hardly reset it ... PLz PLz advise me how to configure it for internet service provider for dial in connection." Thanks, ========================= Russell Newberry Maxis Technologies, Inc 433 West Wilshire Blvd. Oklahoma City, OK 73116 AOL IM "RUSSELLatMAXIS" e-mail: russell(a)maxistech.net Phone: 1 (800) 79 MAXIS International: 1 (405) 842-3331 Fax: 1 (405) 841-7882 http://www.maxistech.net

1 0