April 2003 - USR-TC - mailman.xmission.com

V.34 Anal-Digi Modem NAC
by Anil 23 Apr '03

23 Apr '03

Hi, How can i restrict only a perticular user to the perticular port of the quad modem and so that when other users try to connect to that port should not authenticate Regards Anil

2 1

ftp breaking
by Kancha . 23 Apr '03

23 Apr '03

Using my dial-up connection I connect to TC. When trying to upload files above 500KB via ftp the connection is reset by the ftp server. Could it be Total Control problem as when I connect through a different RAS i can easily ftp large files ? __________________________________________________ Do you Yahoo!? The New Yahoo! Search - Faster. Easier. Bingo http://search.yahoo.com

1 0

RE: [USR-TC] Connection - speed issue
by Joel - Fox Computers 23 Apr '03

23 Apr '03

No - I limited the modem to V.34, on the client side. -----Original Message----- From: Adam Barnhill [mailto:adam@semo.net] Sent: Wednesday, April 23, 2003 11:03 AM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] Connection - speed issue How are you limiting your DSPs to V.34? -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, <http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer -----Original Message----- From: usr-tc-bounces(a)mailman.xmission.com [mailto:usr-tc-bounces@mailman.xmission.com] On Behalf Of Joel - Fox Computers Sent: Wednesday, April 23, 2003 9:41 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Connection - speed issue Don't have a solution - but sharing my experience: First, dialing into a Hiper DSP, I always get 45K+, so I have to restrict my modem to V34 in order to do this. When I do, If I dial into an analog quad modem on a POTS line, I ALWAYS get 33600 for a connection. Dialing into my Hiper DSP's, same phone line, same computer, same modem, (when limited to V34) I can only get 26400. I've always assumed that it had to do with some loss of analog quality in the telco's AD conversion. But would be interested if any one does have a solution a solid reason as to why this is. I've suspected that the same quality-loss issue is responsible for the fact that I'm only getting 45-49K rather than 53K. At first, I thought it was DSP-related, but I don't think so. When dialing into my DSP's from another town 30 miles away (different telco) I can connect at 53333 every single time, with the same modem that only gets 45-49K here locally. In theory, I'm guessing that the other telco has better AD conversion. (I know it's not being converted again at my telco, because if it were, I wouldn't get the V.90 connection) -----Original Message----- From: Jim Mc Cay [mailto:jmccay@adsnet.com] Sent: Wednesday, April 23, 2003 9:33 AM To: usr-tc(a)mailman.xmission.com; jmccay Subject: [USR-TC] Connection - speed issue Hello, I'm hoping that and can get some input on a current project that my company is working on. We are in the process of converting are 5 quad-analog/digital v.32 total control modems and chassises to one newer total control chassis running all Hiper dsp 24 port modem cards and hiper arc routers and hiper nmc. I have the new chassis setup and working. I can dial in and connect and get out to the web. My problem is the customers that live close to our building can connect faster than 33.6 which is a good thing, but customers who live further out, connect at speeds of 28.8 or 26k or even slower. Those customers who connect slower when dialing in to this new modem pool, could connect at 31.2 or 28.8 when dialing in to the older v.34 quad analog chassises. My question is why do I have a down grade in speed moving up to newer faster equipment? Now the quad analog/digital v.34 modems have pots lines connected to the back of them. The hiper dsp cards have T1's connected to them for providing dial tone. Info on the chassises with the quad modems: 15 cards in each chassis quad analog/digital v.34 software version 6.1.86 Note: pots lines connected to back of cards not T1 lines 1 - Net Server card software version 3.8.1 20mb dram 2mb flash ram 1 - Network Mgmt card software ver 6.0.9 20mb dram 2mb flash ram Info on newer Total control chassis: 14 - High-density 24 channel hiper dsp cards software ver 3.5.12 Dram 8mb flash ram 2mb 2 - Hiper Arc Router cards software ver 5.3.3 dram 131mb flash ram 16mb 1 - Hiper NMC card software ver 8.7.3 dram 131mb flash ram 62mb Now, I do have v.92 enabled on the newer chassis and I've tried turning it off but the only difference with it off is, users seem to be able to login faster when they first dial up. The connection rate does not improve or degrade any. Again, how can I get my customers who are able to dial in to the older total control chassises and connect at 31.2 , dial in to the new chassis and connect at the same speed or better. Any help would greatly be appreciated. Thanks, jim _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] Connection - speed issue
by Adam Barnhill 23 Apr '03

23 Apr '03

How are you limiting your DSPs to V.34? -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, <http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer -----Original Message----- From: usr-tc-bounces(a)mailman.xmission.com [mailto:usr-tc-bounces@mailman.xmission.com] On Behalf Of Joel - Fox Computers Sent: Wednesday, April 23, 2003 9:41 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Connection - speed issue Don't have a solution - but sharing my experience: First, dialing into a Hiper DSP, I always get 45K+, so I have to restrict my modem to V34 in order to do this. When I do, If I dial into an analog quad modem on a POTS line, I ALWAYS get 33600 for a connection. Dialing into my Hiper DSP's, same phone line, same computer, same modem, (when limited to V34) I can only get 26400. I've always assumed that it had to do with some loss of analog quality in the telco's AD conversion. But would be interested if any one does have a solution a solid reason as to why this is. I've suspected that the same quality-loss issue is responsible for the fact that I'm only getting 45-49K rather than 53K. At first, I thought it was DSP-related, but I don't think so. When dialing into my DSP's from another town 30 miles away (different telco) I can connect at 53333 every single time, with the same modem that only gets 45-49K here locally. In theory, I'm guessing that the other telco has better AD conversion. (I know it's not being converted again at my telco, because if it were, I wouldn't get the V.90 connection) -----Original Message----- From: Jim Mc Cay [mailto:jmccay@adsnet.com] Sent: Wednesday, April 23, 2003 9:33 AM To: usr-tc(a)mailman.xmission.com; jmccay Subject: [USR-TC] Connection - speed issue Hello, I'm hoping that and can get some input on a current project that my company is working on. We are in the process of converting are 5 quad-analog/digital v.32 total control modems and chassises to one newer total control chassis running all Hiper dsp 24 port modem cards and hiper arc routers and hiper nmc. I have the new chassis setup and working. I can dial in and connect and get out to the web. My problem is the customers that live close to our building can connect faster than 33.6 which is a good thing, but customers who live further out, connect at speeds of 28.8 or 26k or even slower. Those customers who connect slower when dialing in to this new modem pool, could connect at 31.2 or 28.8 when dialing in to the older v.34 quad analog chassises. My question is why do I have a down grade in speed moving up to newer faster equipment? Now the quad analog/digital v.34 modems have pots lines connected to the back of them. The hiper dsp cards have T1's connected to them for providing dial tone. Info on the chassises with the quad modems: 15 cards in each chassis quad analog/digital v.34 software version 6.1.86 Note: pots lines connected to back of cards not T1 lines 1 - Net Server card software version 3.8.1 20mb dram 2mb flash ram 1 - Network Mgmt card software ver 6.0.9 20mb dram 2mb flash ram Info on newer Total control chassis: 14 - High-density 24 channel hiper dsp cards software ver 3.5.12 Dram 8mb flash ram 2mb 2 - Hiper Arc Router cards software ver 5.3.3 dram 131mb flash ram 16mb 1 - Hiper NMC card software ver 8.7.3 dram 131mb flash ram 62mb Now, I do have v.92 enabled on the newer chassis and I've tried turning it off but the only difference with it off is, users seem to be able to login faster when they first dial up. The connection rate does not improve or degrade any. Again, how can I get my customers who are able to dial in to the older total control chassises and connect at 31.2 , dial in to the new chassis and connect at the same speed or better. Any help would greatly be appreciated. Thanks, jim _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] Wrong AcctSessionTime
by Joel - Fox Computers 23 Apr '03

23 Apr '03

In your table, what you have under the "min" column, is the actual number of seconds the users are connected. -----Original Message----- From: Md. Sifat Ullah Patwary [mailto:sifat@spnetctg.com] Sent: Wednesday, April 23, 2003 3:04 AM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] Wrong AcctSessionTime Dear List, Yesterday I configured a NETServer/16 V.34. Its working fine. But I found a problem with it. Its not giving acctsessiontime RADIUS correctly to its radius server. Everyting is correct except this. I tried to find the exact time elapsed by users second and found that no one is accurate. NETServer/16 is giving every entry wrong. Here is a result of query wich gives exact time (AcctStopTime-AcctStartTime) Vs. AcctSessionTime. I have more 2 Terminal Server one from PortMaster II and another is Cyclades PR3000. These two are giving the reading correctly but NETServer/16 is not. mysql> select acctstarttime,acctstoptime,unix_timestamp(acctstoptime)-unix_timestamp(accts tarttime) min,acctsessiontime sec from radacct where nasipaddress='2x.18x.2x.1x' and acctsessiontime>5000 limit 10; +---------------------+---------------------+-------+------------+ | acctstarttime | acctstoptime | min | sec | +---------------------+---------------------+-------+------------+ | 2003-04-22 21:54:47 | 2003-04-22 23:20:15 | 5128 | 6200 | | 2003-04-22 21:56:30 | 2003-04-22 23:16:15 | 4785 | 5502 | | 2003-04-22 22:31:22 | 2003-04-22 23:49:15 | 4673 | 5405 | | 2003-04-22 22:52:26 | 2003-04-23 02:37:23 | 13497 | 34748 | | 2003-04-22 23:50:52 | 2003-04-23 01:25:19 | 5667 | 6732 | | 2003-04-23 00:36:33 | 2003-04-23 03:05:21 | 8928 | 31606 | | 2003-04-23 01:26:35 | 2003-04-23 01:32:50 | 375 | 20208 | | 2003-04-23 13:26:16 | 2003-04-23 13:30:27 | 251 | 2147483647 | +---------------------+---------------------+-------+------------+ 8 rows in set (0.01 sec) NAS '2x.18x.2x.1x' is NETServer/16 V.34 I like to know what I did wrong/ whats the way to fix the problem. Sifat _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

Connection - speed issue
by Jim Mc Cay 23 Apr '03

23 Apr '03

Hello, I'm hoping that and can get some input on a current project that my company is working on. We are in the process of converting are 5 quad-analog/digital v.32 total control modems and chassises to one newer total control chassis running all Hiper dsp 24 port modem cards and hiper arc routers and hiper nmc. I have the new chassis setup and working. I can dial in and connect and get out to the web. My problem is the customers that live close to our building can connect faster than 33.6 which is a good thing, but customers who live further out, connect at speeds of 28.8 or 26k or even slower. Those customers who connect slower when dialing in to this new modem pool, could connect at 31.2 or 28.8 when dialing in to the older v.34 quad analog chassises. My question is why do I have a down grade in speed moving up to newer faster equipment? Now the quad analog/digital v.34 modems have pots lines connected to the back of them. The hiper dsp cards have T1's connected to them for providing dial tone. Info on the chassises with the quad modems: 15 cards in each chassis quad analog/digital v.34 software version 6.1.86 Note: pots lines connected to back of cards not T1 lines 1 - Net Server card software version 3.8.1 20mb dram 2mb flash ram 1 - Network Mgmt card software ver 6.0.9 20mb dram 2mb flash ram Info on newer Total control chassis: 14 - High-density 24 channel hiper dsp cards software ver 3.5.12 Dram 8mb flash ram 2mb 2 - Hiper Arc Router cards software ver 5.3.3 dram 131mb flash ram 16mb 1 - Hiper NMC card software ver 8.7.3 dram 131mb flash ram 62mb Now, I do have v.92 enabled on the newer chassis and I've tried turning it off but the only difference with it off is, users seem to be able to login faster when they first dial up. The connection rate does not improve or degrade any. Again, how can I get my customers who are able to dial in to the older total control chassises and connect at 31.2 , dial in to the new chassis and connect at the same speed or better. Any help would greatly be appreciated. Thanks, jim

1 0

Empty Hiper Chassis Anyone?
by sky1 23 Apr '03

23 Apr '03

I have (5) Blue Labeled Hiper Chassis that I'd like to get out the door. They don't have any Hiper cards in them. They DO have (2) 130 Amp AC power supplies in them and the fan tray. Very nice cosmetic condition. $300.00 each if interested. Thanks, Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

2 2

Wrong AcctSessionTime
by Md. Sifat Ullah Patwary 23 Apr '03

23 Apr '03

Dear List, Yesterday I configured a NETServer/16 V.34. Its working fine. But I found a problem with it. Its not giving acctsessiontime RADIUS correctly to its radius server. Everyting is correct except this. I tried to find the exact time elapsed by users second and found that no one is accurate. NETServer/16 is giving every entry wrong. Here is a result of query wich gives exact time (AcctStopTime-AcctStartTime) Vs. AcctSessionTime. I have more 2 Terminal Server one from PortMaster II and another is Cyclades PR3000. These two are giving the reading correctly but NETServer/16 is not. mysql> select acctstarttime,acctstoptime,unix_timestamp(acctstoptime)-unix_timestamp(accts tarttime) min,acctsessiontime sec from radacct where nasipaddress='2x.18x.2x.1x' and acctsessiontime>5000 limit 10; +---------------------+---------------------+-------+------------+ | acctstarttime | acctstoptime | min | sec | +---------------------+---------------------+-------+------------+ | 2003-04-22 21:54:47 | 2003-04-22 23:20:15 | 5128 | 6200 | | 2003-04-22 21:56:30 | 2003-04-22 23:16:15 | 4785 | 5502 | | 2003-04-22 22:31:22 | 2003-04-22 23:49:15 | 4673 | 5405 | | 2003-04-22 22:52:26 | 2003-04-23 02:37:23 | 13497 | 34748 | | 2003-04-22 23:50:52 | 2003-04-23 01:25:19 | 5667 | 6732 | | 2003-04-23 00:36:33 | 2003-04-23 03:05:21 | 8928 | 31606 | | 2003-04-23 01:26:35 | 2003-04-23 01:32:50 | 375 | 20208 | | 2003-04-23 13:26:16 | 2003-04-23 13:30:27 | 251 | 2147483647 | +---------------------+---------------------+-------+------------+ 8 rows in set (0.01 sec) NAS '2x.18x.2x.1x' is NETServer/16 V.34 I like to know what I did wrong/ whats the way to fix the problem. Sifat

1 0

RE: [USR-TC] Dell Modem Not connecting to TC
by Joel - Fox Computers 22 Apr '03

22 Apr '03

Mike, Just an FYI - I'm running EXACT same config as you, and just had a customer with a Dell and a BCM V.92 modem in here with no problems at all. Wierd. I know for a fact I'm running exact same everything as you and not having any problems with them at all. Don't know what that would be. - Joel -----Original Message----- From: Mike Adkins [mailto:tci@glis.cc] Sent: Tuesday, April 22, 2003 2:41 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Dell Modem Not connecting to TC Hello, Any idea why dell modems are unable to connect to the TC's modem model is BCM V.92 56k Voice Modem Have had several Dell computers unable to connect since we switched to the TC Thanks Mike

1 0

TCM
by Rogerio 22 Apr '03

22 Apr '03

Someone has the latest TCM for Windows ?? or where i can found to donwload? []´s

3 2