January 2003 - USR-TC - mailman.xmission.com

Hiper ARC Question
by Joel - Fox Computers 30 Jan '03

30 Jan '03

For those of you familiar with the Hiper ARC's - Is there any way you know of to completely erase the configuration from a telnet prompt? I want to do the equivelant of choosing option 13 from the bootup menu except I want to be able to do from Telnet - I want to be able to do a complete reconfig of a HiperARC remotely. Any suggestions?

2 1

WTS: Hiper Equipment (Latest Prices)
by sky1 30 Jan '03

30 Jan '03

Here's my latest pricing for my Total Control Hiper Gear!! Hiper DSP sets $230.00 each (Minimum purchase of 2 units!) Hiper ARC sets $100.00 each (128Mb Version) Hiper NMC's $550.00 each (Only have a few of these I want to sell at this time) Hiper Bundles...V.92 enabled w/: (14) Hiper DSP's (2) Hiper ARC's (128Mb version) (1) Hiper NMC (2) 130Amp AC power (1) "Blue Labeled" Chassis w/ fan assembly ....$4750.00 each (Six (6) month warranty) !!! These units are in excellent shape, I'm sure that there are several guys on the list that can vouch for this !!! Also have several of the Quad V.34 (V.90 upgraded) Digital Bundles in stock. w/ (1) Dual T-1 PRI (12) Quad V.34 Digital (V.90 ) cards (1) Hiper ARC (128Mb version) (1) "Regular" NMC (2) 70 Amp AC power supplies (1) "RED" labeled chassis w/ fan tray $200.00 each w/ 30 day warranty..... --Come on folks!!! These got be of use to some of you guys just for the ARC, NMC and power supplies for Back-ups. Thanks for your time, Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

3 3

v.92 disabeling itself
by Paul Farber 30 Jan '03

30 Jan '03

I have a 12 slot chassis with 2 ARCs and a Pentium NMC that seems to turn off v.92 after I set it. My software versions are: NMC - 8.6.3 ARCs - 5.3.3 DSP - 3.5.109 I can set the v.92 master and other other v.92 items in the card config... but it seems to just 'turn back off'. Any ideas? -- Paul Farber Farber Technology farber(a)admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545

1 0

Port tap (--syslog capture...)
by alex 30 Jan '03

30 Jan '03

how can i disable port tapping on HiperARC V4.1.59. default user's port tapping is disabled (as shows "show user default"). no tap interfaces configured (as i think), but there are lot of messages coming on syslog like a: --syslog capture: 0100030c slot:13/mod:4 --syslog capture:stop --syslog capture: 0300120c slot:13/mod:19 --syslog capture:stop --syslog capture: 02000f0c slot:13/mod:16 --syslog capture:stop can anybody help on disabling taps or decoding this messages?

2 1

FS: TC1000 bundles
by Stephen Rivera - WRCA.Net 30 Jan '03

30 Jan '03

Available in stock... Hiper Bundles...V.92 enabled w/: (14) Hiper DSP's (2) Hiper ARC (128/16mb version) (1) Hiper NMC (2) 130Amp AC power (1) "Blue Labeled" Chassis w/ fan assembly $4750.00 ea TC 1000 V.92 - 48 port (2) Hiper 24 Port DSP's Nac's/Nic's (1)Hiper ARC Nac/Nic (1)Hiper Nmc Card Nac/Nic (2) 130 Amp Ac Power supplies (1) "Blue Labeled" Chassis w/ fan assembly Asking $2250.00 TC 1000 V.92 - 96 port (4) Hiper 24 Port DSP's Nac's/Nic's (1)Hiper ARC Nac/Nic (1)Hiper Nmc Card Nac/Nic (2) 130 Amp Ac Power supplies (1) "Blue Labeled" Chassis w/ fan assembly Asking $2700 Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net Tech Support Avail: Cisco, Ascend, 3Com TC1000, Motorola

1 0

Re: Re: [USR-TC] Port tap (--syslog capture...)
by alex 30 Jan '03

30 Jan '03

list tap is empty. any solutions? > What is the output of the command >list tap < ? If some show up and you don't > want them there, you can do >del tap all< to get rid of them. > > On Thursday 30 January 2003 12:11 pm, you wrote: > > how can i disable port tapping on HiperARC V4.1.59. > > default user's port tapping is disabled (as shows "show user default"). > > no tap interfaces configured (as i think), but there are lot of messages > > coming on syslog like a: > > --syslog capture: 0100030c slot:13/mod:4 --syslog capture:stop > > --syslog capture: 0300120c slot:13/mod:19 --syslog capture:stop > > --syslog capture: 02000f0c slot:13/mod:16 --syslog capture:stop > > > > can anybody help on disabling taps or decoding this messages? > > > > _______________________________________________ > > USR-TC mailing list > > USR-TC(a)mailman.xmission.com > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] Switching from First Available to Round Robin
by BSmith＠solunet.com 30 Jan '03

30 Jan '03

Our telco is offering to switch to Round Robin for us. Do we need to change the settings on our Total Controls to Round Robin as well for this to work, or does this only affect things at card level? Any experiences with letting the Total Controls use First Available, and letting the telco Round Robin? -- -Tim --------------------------------------------------------------------------- You are talking about Road Robin on your spans correct? So, they go from ch 1 -> 23/24 -> span2 -> 1 -> 23/24, etc? Thy answer is NOPE! ~Brian.

2 1

RE: [USR-TC] Which v.92 Features are best?
by Joel - Fox Computers 29 Jan '03

29 Jan '03

I have everything V.92 enabled. However, I've found that with some modems (Lucent/Agere specifically), if you enable PCMupstream on the client modem (which isn't enabled by default), that you get WAY slow downstream speed. One particular case was getting 49333 down/26400 up. Enabled PCMupstream and got 28800 down/33333 up. Waste of time, at least with those modems. -----Original Message----- From: Seth Jacobs [mailto:sjacobs@onramp113.com] Sent: Tuesday, January 28, 2003 4:37 PM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] Which v.92 Features are best? We're about to enable v.92 support in our TC1000. We're mostly interested in the MOH and the Quick Connect features. I've heard that if the PCM feature is enabled, it tends to negate the effectiveness of the Quick Connect feature, so we're thinking about not activating that feature. Anyone with field experience care to comment? Seth ----- Original Message ----- From: <BSmith(a)solunet.com> To: <usr-tc(a)mailman.xmission.com> Sent: Tuesday, January 28, 2003 1:15 PM Subject: RE: [USR-TC] Switching from First Available to Round Robin > -----Original Message----- > From: Seth Jacobs [mailto:sjacobs@onramp113.com] > Sent: Tuesday, January 28, 2003 3:52 PM > To: usr-tc(a)mailman.xmission.com > Subject: Re: [USR-TC] Switching from First Available to Round Robin > > > We would do RR if we could (phone company says it's not possible). > > The only downside I see is that if a modem does go stupid it might take > longer to notice. > > Seth > > ----- Original Message ----- > > > Seth, > > You can do Round Robin on the Total Control, your Telco does NOT need > to configure anything. RR on the TC Hub just cycles through your MODEMS, > it doesn't do anything with the actual channels. > > Typically the HiperDSP is configured so that Ch 1 = Modem 1, all the way > through. So, what you can do is the following: > > First Available. > > Lets say 10 people are connected, and modems 1-10 are in use. Then 2 people > disconnect (modem 2 & 4), with First Available the next call that comes in > will get modem #2 ... and the one after that gets modem #4. > > Now, with Round Robin. > > If 10 people are on, 10 modems in use. Channel 2 & 3 become available (user > disconnect), next person that dials gets modem 11, and then modem 12 .. Once > it cycles to modem 24 (or 23), it goes back to modem 1. > > And of course, you have your one to one mapping. > > 10 people connect, modem 2,6,8 disconnect. If Channel 8 gets a call, it > uses > modem 8, and so on. > > Therefore, none of these are configured by your Telco. It is all setup on > the total control. > > The Round Robin you are thinking of is controlled by the Telco, where it > cycles > through ALL available channels, 1-23 -> next span 1-23, etc ... > > So, then what would be the practicality of it? Well, with some vendors, the > modems > take a few seconds to reset. Now, if you have a heavy load on your box, > that is > a problem. Why? Well, if you have 23 lines, and 30 people trying to > connect, 7 > people will get busy. If that the redialer going, and 1 person disconnects, > it is > possible that they will get connected while the modem is in a state of flux. > Meaning > that it has not finished resetting, and therefore can not take a call. Joe > user is > like ekkk, and complains to you the ISP. You tell him, everything is fine, > and he > connects then. > > Now imagine it with a DS3 worth of callers (672) lines, and even more then > that trying > to connect. You can see where doing a Round Robin, or First Available can > be better > for you the ISP. It allows the modems proper time to reset, and therefore > stop the > half ass connections. > > I have seen this a LOT with Ascend (Sorry Ascend people), not really with > TC-Hubs as > much. But, I am sure that it can happen. > > Well, I hope that helps out some. > > Enjoy, > > Brian Smith > CCNA, NCSA > Network Support Engineer > SOLUSERVE > www.solunet.com > 1571 Robert J. Conlan Blvd., Suite 110 > Palm Bay, FL 32905 > (888)449-5766 > fax: (321)-676-1287 > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

7 6

RE: [USR-TC] Switching from First Available to Round Robin
by Tim Huffman 29 Jan '03

29 Jan '03

-- -Tim --------------------------------------------------------------------------- Tim Huffman -----------JORSM Internet, Internet Services Network Ops Manager -----7 Area Codes in Chicagoland timh(a)jorsm.com --------100 Mbps+ Connectivity, 56K-DS3 (219)322-2180 ---------Quality Service, Affordable Prices http://www.jorsm.com -----Serving Gov, Biz, Indivds Since 1995 --------------------------------------------------------------------------- Our telco is offering to switch to Round Robin for us. Do we need to change the settings on our Total Controls to Round Robin as well for this to work, or does this only affect things at card level? Any experiences with letting the Total Controls use First Available, and letting the telco Round Robin? -- -Tim --------------------------------------------------------------------------- Tim Huffman -----------JORSM Internet, Internet Services Network Ops Manager -----7 Area Codes in Chicagoland timh(a)jorsm.com --------100 Mbps+ Connectivity, 56K-DS3 (219)322-2180 ---------Quality Service, Affordable Prices http://www.jorsm.com -----Serving Gov, Biz, Indivds Since 1995 --------------------------------------------------------------------------- > Seth, > > You can do Round Robin on the Total Control, your Telco does NOT need > to configure anything. RR on the TC Hub just cycles through your > MODEMS, it doesn't do anything with the actual channels. > > Typically the HiperDSP is configured so that Ch 1 = Modem 1, all the > way through. So, what you can do is the following: > > First Available. > > Lets say 10 people are connected, and modems 1-10 are in use. Then 2 > people disconnect (modem 2 & 4), with First Available the next call > that comes in will get modem #2 ... and the one after that gets modem > #4. > > Now, with Round Robin. > > If 10 people are on, 10 modems in use. Channel 2 & 3 become available > (user disconnect), next person that dials gets modem 11, and then > modem 12 .. Once it cycles to modem 24 (or 23), it goes back to modem > 1. > > And of course, you have your one to one mapping. > > 10 people connect, modem 2,6,8 disconnect. If Channel 8 gets a call, > it uses > modem 8, and so on. > > Therefore, none of these are configured by your Telco. It is all > setup on the total control. > > The Round Robin you are thinking of is controlled by the Telco, where > it cycles > through ALL available channels, 1-23 -> next span 1-23, etc ... > > So, then what would be the practicality of it? Well, with some > vendors, the modems > take a few seconds to reset. Now, if you have a heavy load on your > box, that is > a problem. Why? Well, if you have 23 lines, and 30 people trying to > connect, 7 > people will get busy. If that the redialer going, and 1 person > disconnects, it is > possible that they will get connected while the modem is in a state of > flux. Meaning > that it has not finished resetting, and therefore can not take a call. > Joe user is > like ekkk, and complains to you the ISP. You tell him, everything is > fine, and he > connects then. > > Now imagine it with a DS3 worth of callers (672) lines, and even more > then that trying > to connect. You can see where doing a Round Robin, or First Available > can be better > for you the ISP. It allows the modems proper time to reset, and > therefore stop the > half ass connections. > > I have seen this a LOT with Ascend (Sorry Ascend people), not really > with TC-Hubs as > much. But, I am sure that it can happen. > > Well, I hope that helps out some. > > Enjoy, > > Brian Smith > CCNA, NCSA > Network Support Engineer > SOLUSERVE > www.solunet.com > 1571 Robert J. Conlan Blvd., Suite 110 > Palm Bay, FL 32905 > (888)449-5766 > fax: (321)-676-1287

1 0

Switching from First Available to Round Robin
by Tim Huffman 29 Jan '03

29 Jan '03

Our Total Controls are currently set up for first available modem routing method (where incoming calls will always hit the first available port), and we are looking at switching to Round Robin (where incoming calls are sent to the next trunk). Does anybody have any advice, experience, or cautions regarding this? -- -Tim --------------------------------------------------------------------------- Tim Huffman -----------JORSM Internet, Internet Services Network Ops Manager -----7 Area Codes in Chicagoland timh(a)jorsm.com --------100 Mbps+ Connectivity, 56K-DS3 (219)322-2180 ---------Quality Service, Affordable Prices http://www.jorsm.com -----Serving Gov, Biz, Indivds Since 1995 ---------------------------------------------------------------------------

3 2