July 2002 - USR-TC - mailman.xmission.com

RE: [USR-TC] Lost Carrier Terminations
by Joel - Fox Computers 31 Jul '02

31 Jul '02

Sorry, new to this stuff, how do I do a reverse telnet to the DSP? I have a support contract, which is where I got the .103 code. The reason was an attempt to solve another problem that may be related. Using a Lucent/Agere Winmodem, I can dial either of the other two service providers in town (both running Total Control Hardware) and get 49333 connections. Dialing my own equipment, the best I can get is 46666. Many of my users are getting connections as high as 52000, but I can't from my location, telling me something is not right. The .103 code was an attempt to fix that. In addition, I have been unable to get a true V.92 connection. I get the quick-connect, and I get V.44 compression, but no upstream PCM. CommWorks support said this was probably a modem problem, but otherwise gave no good explanation. Thanks for the help! Joel -----Original Message----- From: V [mailto:ved@iyka.com] Sent: Tuesday, July 30, 2002 10:47 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] Lost Carrier Terminations XID v42IdExchangeFail(27) I6 screen text: 'XID Timeout' Definition: The modems failed to negotiate the V.42 XID Exchange phase. If you reverse telnet to one of the DSP and do a ati6 after a connection you will get some data - send that to me. Looks like you have a contract with CommWorks for you have 3.5.103. Can you tell me who gave you this code and why this code was given to you? -V ----- Original Message ----- From: Joel - Fox <mailto:jfox@foxcomputers.com> Computers To: usr-tc(a)mailman.xmission.com Sent: Tuesday, July 30, 2002 10:11 PM Subject: RE: [USR-TC] Lost Carrier Terminations Yes v.92 is enabled, and what's an XID timeout? THanks, Joel -----Original Message----- From: V [mailto:ved@iyka.com] Sent: Tuesday, July 30, 2002 10:03 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] Lost Carrier Terminations Do you have v.92 enabled? Do you see an XID timeouts? -V ----- Original Message ----- From: Joel - <mailto:jfox@foxcomputers.com> Fox Computers To: usr-tc(a)mailman.xmission.com Sent: Tuesday, July 30, 2002 9:54 PM Subject: RE: [USR-TC] Lost Carrier Terminations I don't see any user unknown at all. I have 2 DSP's, code versions are 3.5.12 and 3.5.103. The 3.5.103 seems to be doing it a little more often, maybe 60% of the drops, probably a coincidence, but I'm going to update that tonight back to 3.5.12 if I can get these users off of it. I should also mention that although I have quite a few that are 11-30 seconds, I have some connections around 5 or 6 hours that this is happening to, the majority of them are 30-60 minutes and dropping off. Thanks, Joel -----Original Message----- From: V [mailto:ved@iyka.com] Sent: Tuesday, July 30, 2002 9:20 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] Lost Carrier Terminations Lost Carrier - basically means that the connection was dropped due to loss of carrier - meaning the modems started connect and all of a sudden the connection was dropped by the connecting modem. A connection dropped within 11-30 sec is typically due to issues with modems, the LCP must not have started yet if you accounting time is set to before connection. What is the modem code on the DSP that you are using? Also are these logs for user "unknown" ? -V ----- Original Message ----- From: Joel - <mailto:jfox@foxcomputers.com> Fox Computers To: usr-tc(a)mailman.xmission.com Sent: Tuesday, July 30, 2002 8:50 PM Subject: [USR-TC] Lost Carrier Terminations So I'm looking at my RADIUS Accounting logs tonight. I see a lot of "Acct-Terminate-Cause = Lost Carrier", is this normal? Keep in mind, I have about 100 total users, max about 15 simultaneous, and I'm seeing about 250 (about 10%) occurances of this in 6 days. A LOT of the sessions are 11-30 seconds long. Is this normal? Do some modems just do this on disconnecting, or are there really that many people just losing their connections when they didn't want to??? Any ideas? Thanks, Joel

2 1

Anyone have any old 35amp Power Supplies?
by Joel - Fox Computers 31 Jul '02

31 Jul '02

If so, how much?

2 1

RE: [USR-TC] modem stats via snmp
by Brian Becker 31 Jul '02

31 Jul '02

But that is only if the contiguous numbering flag is set...and that only if you are using certain versions. For Total Scrutinizer, we had to start checking for version numbers, contiguous numbering flag & E1 or T1 or PRI running on the card. Brian Brian Becker President, Poplar Bluff Internet, Inc. http://semo.net Home of TotallyFabricated.com Software & Web Design http://TotalScrutinizer.com - Tech Support Just Got Easier! POBox 190 - Poplar Bluff, MO 63902 - 573.686.9114 -----Original Message----- From: usr-tc-admin(a)mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Oliver Francke Sent: Tuesday, July 30, 2002 4:26 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] modem stats via snmp Hi, > > Does anyone know how the TC maps port numbers which the NMC uses above > - > <slot# * 1000 + span#> to the one the arc uses to report back a username in > OID 1.3.6.1.4.1.429.4.10.1.1.18? Or is there another OID that might report > back a username that uses the same type of numbering scheme? So the mapping is: --- 8-< -------------- #!/bin/sh RCOMM=<your-read-community> SRV=$1 SLT=$2 MDM=$3 DUM=`expr $SLT \* 256` INST=`expr 1000 + $DUM + $MDM` echo $INST # usrCipUserName 1.3.6.1.4.1.429.4.10.1.1.18 # usrCipDataLinkConn 1.3.6.1.4.1.429.4.10.1.1.20 snmpget $SRV $RCOMM .1.3.6.1.4.1.429.4.10.1.1.18.$INST .1.3.6.1.4.1.429.4.10.1.1.20.$INST --- 8-< -------------- So, a possible output may be: --- 8-< -------------- GetPortInfo.sh srv1.somewhere 1 2 1258 enterprises.429.4.10.1.1.18.1258 = "aolnet/aol.dlp.Elchenc8.10120100100101de2905.0000.prod" enterprises.429.4.10.1.1.20.1258 = 10 --- 8-< -------------- corresponds to: --- 8-< -------------- srv1.somewhere> list conNECTIONS CONNECTIONS Start Start IfName User Name Type DLL Date Time slot:1/mod:2 aolnet/aol.dlp.Elchenc8.10120100100101de2905.0000.prod DIALIN L2TP 30-JUL-2002 20:32:11 --- 8-< -------------- Hope this helps, Oliver. -- Was hat bei uns die geringste PopulariTAET? Oliver.Francke(a)mediaWays.net fon. +49-5246-80-1389 mob. +49-171-5597734 I used to have a sig, but I've stopped smoking now. _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

modem stats via snmp
by Lewis Bergman 31 Jul '02

31 Jul '02

Is anyone using the various mdmCs<whatever> mib or OID's to gather info on their modem's performance. It seems that quite a few in there might be of use. The curious ones go from 1.3.6.1.4.1.429.1.6.9.1.1.8.<slot# * 1000 + span#> to about 1.3.6.1.4.1.429.1.6.9.1.1.61.<slot# * 1000 + span#> Does anyone know how the TC maps port numbers which the NMC uses above - <slot# * 1000 + span#> to the one the arc uses to report back a username in OID 1.3.6.1.4.1.429.4.10.1.1.18? Or is there another OID that might report back a username that uses the same type of numbering scheme? -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115

2 3

RE: [USR-TC] Lost Carrier Terminations
by Joel - Fox Computers 30 Jul '02

30 Jul '02

I don't see any user unknown at all. I have 2 DSP's, code versions are 3.5.12 and 3.5.103. The 3.5.103 seems to be doing it a little more often, maybe 60% of the drops, probably a coincidence, but I'm going to update that tonight back to 3.5.12 if I can get these users off of it. I should also mention that although I have quite a few that are 11-30 seconds, I have some connections around 5 or 6 hours that this is happening to, the majority of them are 30-60 minutes and dropping off. Thanks, Joel -----Original Message----- From: V [mailto:ved@iyka.com] Sent: Tuesday, July 30, 2002 9:20 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] Lost Carrier Terminations Lost Carrier - basically means that the connection was dropped due to loss of carrier - meaning the modems started connect and all of a sudden the connection was dropped by the connecting modem. A connection dropped within 11-30 sec is typically due to issues with modems, the LCP must not have started yet if you accounting time is set to before connection. What is the modem code on the DSP that you are using? Also are these logs for user "unknown" ? -V ----- Original Message ----- From: Joel - Fox <mailto:jfox@foxcomputers.com> Computers To: usr-tc(a)mailman.xmission.com Sent: Tuesday, July 30, 2002 8:50 PM Subject: [USR-TC] Lost Carrier Terminations So I'm looking at my RADIUS Accounting logs tonight. I see a lot of "Acct-Terminate-Cause = Lost Carrier", is this normal? Keep in mind, I have about 100 total users, max about 15 simultaneous, and I'm seeing about 250 (about 10%) occurances of this in 6 days. A LOT of the sessions are 11-30 seconds long. Is this normal? Do some modems just do this on disconnecting, or are there really that many people just losing their connections when they didn't want to??? Any ideas? Thanks, Joel

2 1

Lost Carrier Terminations
by Joel - Fox Computers 30 Jul '02

30 Jul '02

So I'm looking at my RADIUS Accounting logs tonight. I see a lot of "Acct-Terminate-Cause = Lost Carrier", is this normal? Keep in mind, I have about 100 total users, max about 15 simultaneous, and I'm seeing about 250 (about 10%) occurances of this in 6 days. A LOT of the sessions are 11-30 seconds long. Is this normal? Do some modems just do this on disconnecting, or are there really that many people just losing their connections when they didn't want to??? Any ideas? Thanks, Joel

2 1

RE: [USR-TC] Request for a document please...
by Joel - Fox Computers 30 Jul '02

30 Jul '02

Should be available on the CommWorks website: http://totalservice.commworks.com Although software is protected unless you have a service contract, most of the PDF's are available for free download. -----Original Message----- From: Steve Monkhouse [mailto:steve.monkhouse@ethertech.com.au] Sent: Tuesday, July 30, 2002 11:27 PM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] Request for a document please... -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 can someone point me in the direction of the documentation relating to the Edgeserver-III ?? ( AMD K6-450Mhz / 256Mb RAM ) I need a softcopy of the manual (pdf), and cant find one anywhere... (I need to know the dip switch settings on the NAC).. Thanks! Steve -----BEGIN PGP SIGNATURE----- Version: PGP 7.1.1 iQA/AwUBPUdnMLzZ2D1wrS2iEQKmygCgk+tsLwMTGcw3W/qxS1LiFxclEMcAn3X9 aW4RynGvV5IAr9CDvzBfDAYF =OQM1 -----END PGP SIGNATURE-----

2 1

RE: [USR-TC] Lost Carrier Terminations
by Joel - Fox Computers 30 Jul '02

30 Jul '02

Yes v.92 is enabled, and what's an XID timeout? THanks, Joel -----Original Message----- From: V [mailto:ved@iyka.com] Sent: Tuesday, July 30, 2002 10:03 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] Lost Carrier Terminations Do you have v.92 enabled? Do you see an XID timeouts? -V ----- Original Message ----- From: Joel - Fox <mailto:jfox@foxcomputers.com> Computers To: usr-tc(a)mailman.xmission.com Sent: Tuesday, July 30, 2002 9:54 PM Subject: RE: [USR-TC] Lost Carrier Terminations I don't see any user unknown at all. I have 2 DSP's, code versions are 3.5.12 and 3.5.103. The 3.5.103 seems to be doing it a little more often, maybe 60% of the drops, probably a coincidence, but I'm going to update that tonight back to 3.5.12 if I can get these users off of it. I should also mention that although I have quite a few that are 11-30 seconds, I have some connections around 5 or 6 hours that this is happening to, the majority of them are 30-60 minutes and dropping off. Thanks, Joel -----Original Message----- From: V [mailto:ved@iyka.com] Sent: Tuesday, July 30, 2002 9:20 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] Lost Carrier Terminations Lost Carrier - basically means that the connection was dropped due to loss of carrier - meaning the modems started connect and all of a sudden the connection was dropped by the connecting modem. A connection dropped within 11-30 sec is typically due to issues with modems, the LCP must not have started yet if you accounting time is set to before connection. What is the modem code on the DSP that you are using? Also are these logs for user "unknown" ? -V ----- Original Message ----- From: Joel - <mailto:jfox@foxcomputers.com> Fox Computers To: usr-tc(a)mailman.xmission.com Sent: Tuesday, July 30, 2002 8:50 PM Subject: [USR-TC] Lost Carrier Terminations So I'm looking at my RADIUS Accounting logs tonight. I see a lot of "Acct-Terminate-Cause = Lost Carrier", is this normal? Keep in mind, I have about 100 total users, max about 15 simultaneous, and I'm seeing about 250 (about 10%) occurances of this in 6 days. A LOT of the sessions are 11-30 seconds long. Is this normal? Do some modems just do this on disconnecting, or are there really that many people just losing their connections when they didn't want to??? Any ideas? Thanks, Joel

3 2

TC1000 hardware and service
by Stephen Rivera - WRCA.Net 30 Jul '02

30 Jul '02

In stock..30 day warranty pricing - 120day warranty available: For the newbies: I have a tech available for install & config...set fee / 2 hour time slot. You didnt have to buy the hardware from me. We can dial in or access via IP address. Whatever is easier for you. Limited time pricing on the DSP's, but I have lots. Hiper DSP $800...can negotiate for qty. Hiper ARC (128) $1000 Hiper ARC (64) $875 Hiper NMC $1400 MultiSpan96...lets talk :) ARC $3200 v90 Quad Digital (packs of 12) $600 WTB: Quad Analog/Digital Modem sets -w/ analog nic (daughtercard style) and FAN OUT cables for quad modems. 2x v92 bundles...This is how I bought them $6000. License of software..refer to TomG (3Com) post from last week. Chassis with Dual 130A power Hiper NMC Hiper ARC (128MB) 2x Hiper DSP v90 Hiper Bundles $4850 Chassis w/ dual 130A power Hiper NMC Hiper ARC 2x Hiper DSP v90 Quad Bundles $2000 Chassis w/ dual 70A NMC v90 enabled Hiper ARC (64MB) 12x Quad Digital modem I have lots of MP, netservers in stock too. Buying NETSERVER 16 v34's. Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net

1 0

Quad-Analog V.32terbo Modems with an ARC?
by Joel - Fox Computers 30 Jul '02

30 Jul '02

The Quad-Analog V.32 Modems, the ones with 4 RJ11's and a big multi-serial port on the back, if you put one of those in a chassis with an ARC, will it route incoming calls to the ARC rather than to the output on the back? Just curious, was thinking about using this for testing things like filters and such without messing with my production unit. Thoughts? Thanks, Joel

1 0