February 2001 - USR-TC - mailman.xmission.com

RE: (usr-tc) Power supplies
by Mark E. Levy 15 Feb '01

15 Feb '01

> Hi list, > > Is there any way to convert a DC chassis to AC? Or does > anyone have any > 70amp AC chassis for sale? Just replace the DC supplies with the AC version. The chassis are the same either way. --------------------------------------------------------------------- Mark E. Levy, President FSInet, Inc. | System Management Associates, Inc. 800-827-6085 x202 | 847-291-1550 x202 847-753-6832 fax | 847-291-3866 fax www.fsi.net | www.sysman-inc.com mark(a)fsi.net | levy(a)sysman-inc.com --------------------------------------------------------------------- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Power supplies
by netboss＠cyberport.net 15 Feb '01

15 Feb '01

Hi list, Is there any way to convert a DC chassis to AC? Or does anyone have any 70amp AC chassis for sale? Thanks, Gary - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Radius Errors
by Kevin Hemsley 15 Feb '01

15 Feb '01

I'm getting many of these errors from one of my HiperArcs in my radius.log file. Any ideas: Mon Feb 5 06:54:56 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 533 not found Mon Feb 5 07:39:31 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 534 not found Mon Feb 5 07:48:19 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 533 not found Mon Feb 5 08:06:42 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 534 not found Mon Feb 5 08:11:34 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 533 not found Mon Feb 5 08:29:21 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 534 not found ---------------------------------- Kevin Hemsley Systems Engineer Microserv Computer Technologies, Inc. kev(a)ida.net KB7TYA - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) HiPer DSP MultiSpan cards
by Ronald Kushner 15 Feb '01

15 Feb '01

Had anyone out there purchased the new HiPer DSP MultiSpan cards? I'm at the point where I'm going to have to buy new hardware and the $3k savings over HiPer DSPs is attractive. Are the modems at least as good or better than HiPer DSPs? I did not anticipate purchasing more hardware due to churn and other options, but the way things are going I'm going to need to purchase more ports, so I haven't kept up with what's what. In the last three months I've watch our usage grow at an alarming rate. Purchasing a HiPer DSP bundle doesn't seem to make any sense at the way things are going. I have a chassis that running year old ARC and DSP code, any problems there too? I do have 128MB ARCs. -Ron GLISnet, Inc. 810/939.9885 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

RE: (usr-tc) HiPer DSP MultiSpan cards
by Verreault, John 13 Feb '01

13 Feb '01

Out of curiosity, what is the price for the new QUAD PRI cards? Thanks John Verreault AEI Internet -----Original Message----- From: Ronald Kushner [mailto:ron@glis.net] Sent: Friday, February 09, 2001 12:14 AM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) HiPer DSP MultiSpan cards Alan Martin wrote: > > Ron, > > Out of curiosity are you planning on putting this in a 1000 Chassis? Is > this the 96 port card? Yes, I'm putting it into a two year old chassis. It's the four PRI card. I am under the impression they have a new HiPer ARC router with a faster processor and 256MB of RAM, but my older ARCs will work according to the salespeople I've talked to. I'm just wondering if anyone else on the list has purchased these cards? I'd love to fill the few remaining slots I have in a 130A chassis with higher density cards. -Ron GLISnet, Inc 810/939.9885 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) FS: Total Control Chassis
by Brian 10 Feb '01

10 Feb '01

I have for sale a few Total Control chassis: chassis with integrated fan tray 1 T1/PRI card 12 Quad modems Netserver/PRI 70AMP Supply NMC $2000.00 each ----------------------------------------------- I'm buying used CISCO gear!! email me for a quote Brian Feeny e:signal@shreve.net CCNP+Voice/ATM/Security p:318.222.2638x109 CCDP f:318.221.6612 Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) fail dsp solid orage light in utilization area
by D Gray 08 Feb '01

08 Feb '01

A bad modem day. Our 24 port modem DSP when powered on shows a solid orange light in the 'utilization' area. it is the fourth light from the bottom of the ten lights. Does anyone recognize this?? Is there a fix w/o going back into factory??? input requested. ____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) feature enable
by Steve 08 Feb '01

08 Feb '01

Go into TCM / Highlight your NMC / Configure/ Programmed Settings / Added Cost Features and it should show something like.... HUB Security Disabled Cellular Disabled AutoResponse Enabled X2/V.90 Enabled PIAFS Disabled -----Original Message----- From: Brian <signal(a)shreve.net> To: USRobotics TC Mailing List <usr-tc(a)xmission.com> Date: Thursday, 8 February 2001 05:00 Subject: (usr-tc) feature enable > > >can someone refresh my memory on what the feature enable string should >show on an nmc with v90 enabled? x2? > > >----------------------------------------------- > I'm buying used CISCO gear!! > email me for a quote > >Brian Feeny e:signal@shreve.net >CCNP+Voice/ATM/Security p:318.222.2638x109 >CCDP f:318.221.6612 >Network Administrator >ShreveNet Inc. (ASN 11881) > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) feature enable
by Brian 08 Feb '01

08 Feb '01

can someone refresh my memory on what the feature enable string should show on an nmc with v90 enabled? x2? ----------------------------------------------- I'm buying used CISCO gear!! email me for a quote Brian Feeny e:signal@shreve.net CCNP+Voice/ATM/Security p:318.222.2638x109 CCDP f:318.221.6612 Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Older NMC, help?
by Brian 07 Feb '01

07 Feb '01

I have an older NMC, the kind I worked with for many years, but have drawn a blank on what to try when it won't respond on the console port. All DIPs are down on it, isn't their one I can toggle to maybe clear it out? I do remember its possible to brick an older NMC, and possibly that is the case with this one. Also if someone remembers the feature enable string that shows v90, I am looking for that as well. Thanks for all the help, Brian ----------------------------------------------- I'm buying used CISCO gear!! email me for a quote Brian Feeny e:signal@shreve.net CCNP+Voice/ATM/Security p:318.222.2638x109 CCDP f:318.221.6612 Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2