February 2001 - USR-TC - mailman.xmission.com

RE: (usr-tc) TC NetServer v34 analog
by list＠angelnet.com.br 26 Feb '01

26 Feb '01

Heii Helloo.. Ho yea.. the TC is working fine i have the manual ( idowloaded from 3com sitee ), but in manual only speak how set fixed ips to use with the internal user tables ( well, if i read all manuals ok and undestand . heeh).. Now my TC is working in a pool ip modes.. without problems ( well only the standart problems of this TC )... Hamm, sorry iam using the Radius .. and yeahh i have one teminal cable .. Pleasee can you help me? -----Original Message----- From: albert [mailto:emmanuel@mwt.net] Sent: Monday, February 26, 2001 1:36 AM To: list(a)angelnet.com.br Subject: RE: (usr-tc) TC NetServer v34 analog Hello,... first may i ask if you have a set of manuals for the unit? and a USR consol cable? albert > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of > list(a)angelnet.com.br > Sent: Monday, February 26, 2001 10:15 AM > To: usr-tc(a)xmission.com > Subject: (usr-tc) TC NetServer v34 analog > > > Hello Peoples?? > Well sorry if my question is out of this list, but i need some help, and > 3com dont help me.. NEVER ... > Well i need ( if possible ) configure my Total Control Netserver > V.34 Analog > to use with fixed IP's ...... > Pleaseeee someone help mee... is urgentt...... > My ICQ 14484847 WEGA > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 3

(usr-tc) v90 on the nmc
by Brian 26 Feb '01

26 Feb '01

If you have an NMC with v90 enabled, and you pull the flash out and move it to another NMC that is not v90 enabled, will that new nmc now be v90 enabled? In other words, is the key set in the flash and transportable between nmc's? or is it dependent on other factors? Brian ----------------------------------------------- I'm buying used CISCO gear!! email me for a quote Brian Feeny e:signal@shreve.net CCNP+Voice/ATM/Security p:318.222.2638x109 CCDP f:318.221.6612 Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

7 12

(usr-tc) TC NetServer v34 analog
by list＠angelnet.com.br 26 Feb '01

26 Feb '01

Hello Peoples?? Well sorry if my question is out of this list, but i need some help, and 3com dont help me.. NEVER ... Well i need ( if possible ) configure my Total Control Netserver V.34 Analog to use with fixed IP's ...... Pleaseeee someone help mee... is urgentt...... My ICQ 14484847 WEGA - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) configuring a second HiPer ARC
by Antonio Querubin 24 Feb '01

24 Feb '01

I'm installing a second HiPer ARC into a Total Control chassis and am having some difficulty integrating it into the system for automatic failover. I'm running into several issues. One problem I've run into is the IP address pools that the HARCs use. Is there a way for both HiPer ARCs to share the same IP address pool without stepping on each other? Or if one fails, can the other one automatically acquire the address pool of the failed HARC? Is there a way for the second HARC to be assigned the first HARC's IP address as a hot standby IP address? If neither HARC is configured as the owner of a modem card, how does the NMC determine (or is configured to specify) which HARC does route for a particular modem card? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 5

Re: (usr-tc) Busy out causes "number .. been disconnected"
by Kirk Mitchell 23 Feb '01

23 Feb '01

At 11:37 PM 2/22/01 -0500, drernst(a)kirkwood.hoosier.net wrote: >Running PRIs on hiperDSPs with a hiperarc, we have discovered a very very >strange thing. It seems that if we "busy out" any of the channels on >the PRI in TCM, the telco give the famous "The number you have reached, >X X X - X X X X has been disconnected" ???? I've got limited data, I >admit, because we naturally don't want this happening much. But anyone >have any thoughts about this? I'm very surprised that there's anything we >can do on our end that would make the telco give that message. Sounds like they don't have the hunting set properly. Any time you've got DSP modems busied out, the calls should roll on to the next available channel in the hunt group. Ever had busies when all of your modems weren't full? This would be another symptom of a hunting problem. -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Seperating Authentication / Accounting
by Jamie Orzechowski 21 Feb '01

21 Feb '01

Hello ... I have 2 radius servers a and b A -> Authentication B -> Accounting What I am trying to do it have each server be a backup for each other so primary authentication (A) has a backup of B primary accounting (B) has a backup of A I have configured these but what is happening is that request for accounting / authentication are being distributed among both servers ... I only want requests to be sent to the backup server if the main is down ... any ideas how to do this?

1 0

(usr-tc) Seperatating authe and acct
by Jamie Orzechowski 21 Feb '01

21 Feb '01

Hello ... I have 2 radius servers a and b A -> Authentication B -> Accounting What I am trying to do it have each server be a backup for each other so primary authentication (A) has a backup of B primary accounting (B) has a backup of A I have configured these but what is happening is that request for accounting / authentication are being distributed among both servers ... I only want requests to be sent to the backup server if the main is down ... any ideas how to do this?

1 0

(usr-tc) WTB: 70A power supply
by Brian 21 Feb '01

21 Feb '01

If anyone has a 70A power supply they are selling, I am looking for one...........say $100? Brian ----------------------------------------------- I'm buying used CISCO gear!! email me for a quote Brian Feeny e:signal@shreve.net CCNP+Voice/ATM/Security p:318.222.2638x109 CCDP f:318.221.6612 Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) MPIP
by Boian Iliev Jordanov 21 Feb '01

21 Feb '01

Dear all, Consider the following scenario - 2HiperARC on chassis with multiple HiperDSP's on them First ARC is MPIP Server and client to itself and second is client to first. Both of them running ntp. When ISDN call is terminated i mean isdn/bri and user initiated 2 sessions with MPPP, in my radius i seen something that encourage me, a user have accounted 3 sessions one of them with Framed-IP-Address set to 0.0.0.0 and originated from Second ARC (Running client MPIP) and others two with real ips and originated from First ARC. This is how i see it in my radwho. #205 user_x ISDN S6105 Tue 22:08 tch-1.Sofia.0rbitel.net 212.95.170.189 #206 user_x ISDN S2066 Tue 22:08 tch-2.Sofia.0rbitel.net 0.0.0.0 #207 user_x ISDN S1564 Tue 21:59 tch-1.Sofia.0rbitel.net 212.95.170.189 Shall i consider this as a bug ? Does anybody run in same conditions and Is this a normal ? -- Boian Iliev Jordanov SNE Orbitel - the Internet company tel. +359-2-9370723 http://www.orbitel.bg - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) New to list with 3 questions
by mark ross 18 Feb '01

18 Feb '01

Hi, Does anyone know if there is any difference between the "old style" and the "new style, with intergrated fan tray" TC 1000 chassis ? Also One of my Netserver cards reports "enhanced packet bus" when I do the "show version command" any idea what the differnence is ? Anyone have a x2 key or enabled NMC they can part with ? thanks - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3