November 2001 - USR-TC - mailman.xmission.com

RE: (usr-tc) NMC not responding
by Mark E. Levy 06 May '03

06 May '03

I;ve had this happen a few times. Just reboot the NMC card by sliding it out if the chassis or via the console interface and it will be well again (until next time). Rebooting the NMC won't affect active users sessions. --------------------------------------------------------------------- Mark E. Levy, President FSInet, Inc. | System Management Associates, Inc. 800-827-6085 x202 | 847-291-1550 x202 847-753-6832 fax | 847-291-3866 fax www.fsi.net | www.sysman-inc.com mark(a)fsi.net | levy(a)sysman-inc.com --------------------------------------------------------------------- > -----Original Message----- > From: Jeff Mcadams [mailto:jeffm@iglou.com] > Sent: Friday, June 08, 2001 9:51 AM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) NMC not responding > > > Also sprach Kirk Mitchell > > My NMC recently stopped responding to SNMP queries, etc and I'm > >unable to access it via TCM. It has, however, not seemed to affect > >anything as far as dial-up, routing, etc. Other than the fact that I > >can't run MRTG against it or the badmodems.pl script, there's no > >indication that it's having problems. > > Not surprising. The NMC does not have anything to do with the routine > actions of taking and handling calls...it is what it says it > is...purely > a management card. You can totally remove the NMC and not lose any of > the actual *production* functionality of the chassis. > > > Has the card gone bad...need replaced, lost something in part of > >config? How do I go about finding/fixing the problem? > > Proly just needs a reboot, or possibly a reconfig...I've had > a few lose > some of the config (including IP addresses and stuff), and a reconfig > from console (takes me about 30 seconds these days) gets them > fully back > up and running (sucks if its a remote city though). > -- > Jeff McAdams Email: jeffm(a)iglou.com > Head Network Administrator Voice: (502) 966-3848 > IgLou Internet Services (800) 436-4456 > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 4

TCM and XP
by Steve Cobb 02 Aug '02

02 Aug '02

I sent this before but I'm not sure that it went through. I'm trying to use TCM 6.0.23 with Windows XP and I can't get it to install. Anyone doing this? Thanks, Steve Cobb

8 8

(usr-tc) FW: [datacomm] Secret access to TCs
by Brian Becker 24 Jun '02

24 Jun '02

The newest edition to our IT Department (he's been in Tech Support for 3 years) emailed me this afternoon (full email below). I didn't believe him at first so I telneted to on of our TC boxes and when prompted with "Login:" I typed adm and pressed Enter. HOLY COW! It said "Hiper:" and I had full access. I'm curious as to how many people on this list were vulnerable like us (we have 20 TC boxes throughout Southeast Missouri). Brian Brian Becker President, Poplar Bluff Internet, Inc. P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114 Home of http://semo.net - Southeast Missouri's Online Community http://TotallyFabricated.com Total Scrutinizer - Tech Support Just Got Easier WebGabber - All-html Web Chat Software -----Original Message----- From: Adam Barnhill Sent: Tuesday, July 24, 2001 6:41 PM To: ---interoffice DataComm List--- Subject: [datacomm] Secret access to TCs It has come to my attention that our TCs were vulnerable to anyone's attack. User : adm Would allow access to manage and login to our TCs. The fix was easy. Just 'del user adm' and then 'save all' (thanx Brian) I was actually searching for TC command references, and happened upon ;) a hack list of default and backdoor passwords. The link I originally found a hack article on is http://the.wiretapped.net/security/info/textfiles/k1ine_11.txt and the password list is in that tree somewhere.. Lots of backdoors for other RAS, switches, hubs and other.. Adam Barnhill Systems Technician / IT Dept. Semo.net / Poplar Bluff Internet, Inc. 1(877)686-9114 http://semo.net/ _______________________________________________ datacomm mailing list datacomm(a)lists.semo.net http://lists.semo.net/mailman/listinfo/datacomm - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

(usr-tc) Upgraded TC's
by Mark Thornton 21 Jun '02

21 Jun '02

We jsut upgraded our TC chassis to the lastest available code (yes we paid for support) and the phones have stopped ringing. We always had a certain level of calls with various connection problems of one sort or another, but that seems to have dried up in the week since we installed the new code. We made the decision to go with the paid support over replacement of our chassis strictly on financial grounds. There was no way to amortize new equipment costs for our dialup market. Yes, it blows to have to pay for something others get for free, however I must say the support I have gotten is so much better than what I ever got from 3Com directly. There has been no backlash from the new code that I have found which is also a welcome change. Mark Thornton San Marcos Internet, Inc 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

16 21

(usr-tc) Upgrading a TC
by Rob 19 Jan '02

19 Jan '02

What is the *least* expensive way to upgrade a TC v34 system to v90? Is there one? Feel free to write me offlist at mailto:rjb@worldnetoh.com. Thenks! Rob - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

MRTG Sript for Modem utilization.
by Timothy C. Bohen 30 Nov '01

30 Nov '01

Does anyone have an MRTG script to track modem utilization on the Arc's? Thanks Timothy C. Bohen CMSInter.Net / Crystal MicroSystems =================================== web : www.cmsinter.net email : Tim(a)CMSInter.Net phone : 989.235.5100 x222

6 11

WTB: Cables - Total Control
by Steve Rivera -www.wrca.net 30 Nov '01

30 Nov '01

I am interested in any USR cables you have available. The mini scsi to 4 port rs232 or mini scsi to rj46 cables. Send me your list. http://www.wrca.net Worldwide Provider of Network Hardware since 1981 Steve Rivera 732-833-2111 x102 732-433-5890 Cell

1 0

FS: USR / 3Com Hiper DSP, ARC, NMC, 130A power sets
by Steve Rivera -www.wrca.net 29 Nov '01

29 Nov '01

WRCA.Net has the following USR in stock, ready to ship. Partial listing of USR inventory. Parts available. Hiper DSP $1200 Hiper ARC $1600 128MB Hiper ARC NAC Only $800 Hiper NMC NAC Only $800 NMC v90 $600 130A power sets $475 70A power set $225 Hiper Bundles: 130A Bundle (Blue Label chassis), nmc, hiper arc, 2x hiper dsp $4500 70A bundle, nmc, hiper arc, 2x hiper dsp $4000 Quad Bundles 45A Bundle, nmc, netserver pri, 12x quad digital modem, dual pri $850 70a Bundle, nmc v90, netserver pri, 12x quad analog/digital modem, dual pri $1500 http://www.wrca.net Worldwide Provider of Network Hardware since 1981 Steve Rivera 732-833-2111 x102 732-433-5890 Cell

3 2

Warranty period/time
by Paul Farber 27 Nov '01

27 Nov '01

Hello I have a 2.5 year old (got it in 3/99) TC Chassis that has a bad 70A PS (the light is red DOH!) Since thier web site contains no usefull information on the warranty period that I could find (URL?) what was the standard for regular repair? I thought it was 5 year.... close? Thanks -- Paul Farber Farber Technology farber(a)admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545

2 1

HiperDSP v3.1.7 Reboots (anyone else?)
by Marshall Morgan 24 Nov '01

24 Nov '01

We are getting reports from our internal monitoring system saying cards are rebooting (less than 96, 15 minute intervals in the following mib after 24 hours). We haven't double checked it with online logs yet, but I believe they are correct. Anyone else getting these? (cards 1025, 4025, 5025 rebooted based on the SNMP results): transmission.18.6.1.4.1025 = 63 transmission.18.6.1.4.2025 = 96 transmission.18.6.1.4.3025 = 96 transmission.18.6.1.4.4025 = 51 transmission.18.6.1.4.5025 = 53 transmission.18.6.1.4.6025 = 96 transmission.18.6.1.4.7025 = 96 transmission.18.6.1.4.8025 = 96 transmission.18.6.1.4.9025 = 96 NOTE: For the record: Cards were flashed no more than 6 at a time via a HiperNMC (v8.2.7) and TCM 8.2.6, restored defaults on template 1, saved template to NVRAM, restore from NVRAM, refreshed channels, same T1/E1 and modems to NVRAM and then rebooted again. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838

1 0