August 2000 - USR-TC - mailman.xmission.com

RE: (usr-tc) Lost password on Netserver. (fwd)
by mike＠otherland.dyndns.org 16 Aug '00

16 Aug '00

If your talking TC Netserver its dip 5. ---------- Forwarded message ---------- Date: Tue, 15 Aug 2000 17:04:28 -0700 From: albert <emmanuel(a)mwt.net> Reply-To: usr-tc(a)lists.xmission.com To: usr-tc(a)lists.xmission.com Subject: RE: (usr-tc) Lost password on Netserver. what are we talking about here?? a netserver 16 ? if so it is 4..to clear,.. a > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Veda Narayan > Sent: Tuesday, August 15, 2000 1:51 PM > To: usr-tc(a)lists.xmission.com; albert > Subject: RE: (usr-tc) Lost password on Netserver. > > > Quoting albert <emmanuel(a)mwt.net>: > > > dip 4 down power up.,... > > No its dip 5 down not dip 4 > > -V > > > > > -----Original Message----- > > > From: owner-usr-tc(a)lists.xmission.com > > > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jaye Mathisen > > > Sent: Monday, August 14, 2000 4:21 PM > > > To: usr-tc(a)lists.xmission.com > > > Subject: (usr-tc) Lost password on Netserver. > > > > > > > > > > > > > > > I'm taking over some maint. because of the departure of the previous > > > person. One of the netservers has a password that I can't figger' > > out. > > > > > > Isn't there a dip switch that wipes everything out? Or how do I > > recover > > > this password? > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > > > =========== > > -V > > ========== > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Lost password on Netserver.
by Jaye Mathisen 15 Aug '00

15 Aug '00

I'm taking over some maint. because of the departure of the previous person. One of the netservers has a password that I can't figger' out. Isn't there a dip switch that wipes everything out? Or how do I recover this password? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

(usr-tc) PRI card problem?
by Lists 15 Aug '00

15 Aug '00

Further to my last e-mail, now I'm getting this from the PRI card: <PH_ERROR> ph_frame__post_xmit: datagram: frame t/p: 8/0030:001e48ec, status >0x04< Anyone know if this is a fried PRI card, a fried chassis, some other fried card, fried code, fried config, or something else? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Anybody need a EdgeServer Card?
by Steve Rivera -www.wrca.net 15 Aug '00

15 Aug '00

WR Communication Associates (WRCA) has the following card available to ship immediately. Cards are guaranteed working upon delivery. 1- USR EdgeServer Card w/ SCSI-2 NIC Part# 69-001160-01 R:5 Part# 69-001410-00 R:2 If you have an interest please contact me off list. I AM IN THE MARKET FOR: Hiper ARC's, DSP's, Quad Analog/Digitals. Please email/Call if you have any available. Steve Rivera (VP) - w-732-833-2111 / c-732-433-5890 24Hr www.isp-networkhardware.com ICQ# 75229638 Email: srivera(a)wrca.net Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,Verilink, IBM,Motorola,UDS,Codex,ATT,Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom, APC Batteries & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Resource pools
by Lists 15 Aug '00

15 Aug '00

Hi All, What's the best way to setup a dual PRI card with two different dialup numbers? In this case, I have one span on one directory number, and another on another number. Each number needs to route to a specific pool of modems. Seems innocent enough. I've configured up the PRI card as follows: Reserved Pool to Inbound Phone Number Mapping Pool ID Inbound Phone Number Pool Type ------- -------------------------- --------- 1 11111111 Analog 2 22222222 Analog 3 ? None (where the appropriate numbers have been substituted) Modem mappings as follows: Quad B-Channel Modem/ I-Modem Reserved Pool Assignments ID Slot/ Pool_ID ID Slot/ Pool_ID ID Slot/ Pool_ID ID Slot/Pool_ID Chan Chan Chan Chan 1 1/1 0 17 5/1 1 33 9/1 2 49 13/1 2 2 1/2 0 18 5/2 1 34 9/2 2 50 13/2 2 3 1/3 0 19 5/3 1 35 9/3 2 51 13/3 2 4 1/4 0 20 5/4 1 36 9/4 2 52 13/4 2 5 2/1 0 21 6/1 1 37 10/1 2 53 14/1 2 6 2/2 0 22 6/2 1 38 10/2 2 54 14/2 2 7 2/3 0 23 6/3 1 39 10/3 2 55 14/3 2 8 2/4 0 24 6/4 1 40 10/4 2 56 14/4 2 9 3/1 1 25 7/1 1 41 11/1 2 57 15/1 0 10 3/2 1 26 7/2 1 42 11/2 2 58 15/2 0 11 3/3 1 27 7/3 1 43 11/3 2 59 15/3 0 12 3/4 1 28 7/4 1 44 11/4 2 60 15/4 0 13 4/1 1 29 8/1 2 45 12/1 2 61 16/1 0 14 4/2 1 30 8/2 2 46 12/2 2 62 16/2 0 15 4/3 1 31 8/3 2 47 12/3 2 63 16/3 0 16 4/4 1 32 8/4 2 48 12/4 2 64 16/4 0 When I place a call to the first number, I get (PRI debug): uccu_get_new_uccb: attach uccb to head of list. tcid: 0x8 ucid: 0x00000008 uccu_get_new_uccb: ALLOC tcid: 0x8 ucid: 0x00000008, allocated = 1, dsl_id=0 sfn:ucc_null,evt:20-SETUP_IND,tcid:0x8,ucid:0x00000008 ucc_setup_in_call: tcid: 0x8, CRV: 22 (0x16) DNIS nums:4 cl type override nums:0 ucc_setup_in_call: ANI (calling_phnum) >362347174<, len = 9, err = 0x32d84 uccidm_search_DNIS_reserved_pool: len_called_num = 8: stripped inbound phone >64719200<, len = 8 uccidm_search_DNIS_reserved_pool: local stripped DNIS >64719200<, len = 8 ucc_route_to_DNIS_reserved_pool: activated: reserved pool ID/type: [1/1], DNIS: >64719200< ds0_res_call_type: dsl: 0, intid: 0, ds0: 8, bct: 73, err: 0 verdict: 1 uccidm_reserve_ds0: SUCCESS: call_type: ANALOG, span=0, ds0=9, in_flag=1 ucc_route_to_DNIS_reserved_pool: no anlg mdm available in pool 1... trying I-mdm UCCM_BUILD_TODEV_NSF_IE: compand code used = 0 (0=A-law,1=U-law,2=country) GetDS0SlotMapByte: mdm_id=11 span=0 ds0=9 octet=3 bitmap=0 GetDS0SlotMapByte: mdm_id=11 span=0 ds0=9 octet=2 bitmap=0 GetDS0SlotMapByte: mdm_id=11 span=0 ds0=9 octet=1 bitmap=1 GetDS0SlotMapByte: mdm_id=11 span=0 ds0=9 octet=0 bitmap=0 ucc_route_to_DNIS_reserved_pool,send usr_X_setup_con_req to dev ucc_route_to_DNIS_reserved_pool:tcid:0x8,ucid:0x00000008,sp:0,b:9,tts:3,dt:4,s/c:3/4,hdl:3 <PH_ERROR> ph_frame__post_xmit: datagram: frame t/p: 8/0030:001e48ec, status >0x04< NOTE:uccpbus_disconnected func called, hdl:3,status:155 NOTE:uccpbus_closed_cb func called, hdl:3,status:0 NOTE:uccpbus_opened_cb func called, hdl:3,status:0 As best I can tell, it's getting the DNIS OK, and mapping it to the right pool, but just not finding any modems in the pool. The modems are defined to the PRI as Quad-I-modems, and are active in the NETserver. All modems are set for PRItdm as the interface type. This chassis has two NETservers - one for each dialup number. PRI card is at 3.1.5, Netserver at 3.8.1. This must be simple, surely? I'm obviously missing something - anyone know what? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Is there a way to not accept anonymous calls?
by Jaye Mathisen 14 Aug '00

14 Aug '00

Is there any way to configure a PRI (on the Netserver PRI, or the DSP), to not accept a call w/o caller-ID info? If it's just not available because of equipment, that's fine, but if the caller is specifically blocking the c-id, then I want to not accept the call on the rack... Is this doable? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

(usr-tc) I just can't put my finger on it...
by Jaye Mathisen 14 Aug '00

14 Aug '00

TC NMC 5.5.5, quad modems, PRI. quad modem picks up on an analog call, but never generates the carrier tone... SO the customer just hears dead air... I know there was something for this, maybe modem mapping or somesuch, but it's escaping me. Any tips appreciated. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 4

(usr-tc) Quad's&Dual T1: now seem to "busy" themselves out pretty frequent ly
by Scott Trautman 11 Aug '00

11 Aug '00

Not sure at what point in time this started, but I regularlly have to go into the T1 card, look at the line stats, figure out which channels are in busy out, reset them. I don't believe I have anything setup with auto-response to do anything like busy itself out. Any way to stopping the modem from busy-ing itself out/any why on what's happening here? Grrrr....replace all of them with DSP's but I'm feeling a little too cheap right now.... T1 Span Line 1 DS0/Modem Status DS0 DS0 Modem Slot/ DS0 DS0 Modem SLOT/ Status Status Chan Status Status chan 1 CONNECT-IN CONNECT-IN 2\1 13 IDLE IDLE 5\1 2 CONNECT-IN CONNECT-IN 2\2 14 IDLE IDLE 5\2 3 BUSY-OUT BUSY-OUT 2\3 15 IDLE IDLE 5\3 4 CONNECT-IN CONNECT-IN 2\4 16 IDLE IDLE 5\4 5 CONNECT-IN CONNECT-IN 3\1 17 IDLE IDLE 6\1 6 CONNECT-IN CONNECT-IN 3\2 18 IDLE IDLE 6\2 7 IDLE IDLE 3\3 19 IDLE IDLE 6\3 8 IDLE IDLE 3\4 20 IDLE IDLE 6\4 9 IDLE IDLE 4\1 21 IDLE IDLE 7\1 10 IDLE IDLE 4\2 22 IDLE IDLE 7\2 11 IDLE IDLE 4\3 23 IDLE IDLE 7\3 12 IDLE IDLE 4\4 24 IDLE IDLE 7\4 SMT Scott M. Trautman 800-482-4638 Global Dialog Internet 608-240-4638,4637fax 2810 Crossroads, STE LL2 scott(a)gdinet.com Madison WI 53718 <http://www.gdinet.com/> - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) FS: Netservers, MP, Managed MP
by Steve Rivera -www.wrca.net 11 Aug '00

11 Aug '00

WR Communications Asssociates has the following equipment available for immediate sale. All equipment listed is sold with 30 day warranty, Books and Rack Ears. Worldwide shipment welcomed. In House: 1- Netserver 16 v34 1- Netserver 8 v34 2- Netserver 8I 1- MP8 v34 3- MP16 v34 1- Managed MP16 v34 In Coming: Early Next week. 2- MP8 v34 1- MP16 v34 1- Managed MP16 v34 2- Netserver 8 v34 1- Netserver 8I Steve Rivera (VP) - w-732-833-2111 / c-732-433-5890 24Hr www.isp-networkhardware.com ICQ# 75229638 Email: srivera(a)wrca.net Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,Verilink, IBM,Motorola,UDS,Codex,ATT,Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom, APC Batteries & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) problem with dual E1
by Jorge Lozano 11 Aug '00

11 Aug '00

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a chassis with a dual E1 card, quad digital and netserver. The E1 is configured as R2 LME, and everything is working fine apparently but when 5 users call in to total control, all timeslots appear as in use in the telephonic company. Any ideas about what is the problem, the telephonic company uses an Alcatel system 12000 rel. 7.0 ... I think so.. :-) Regards, Jorge Lozano <jorge(a)andinet.com> The only way to predict the future is... to create it! Please visit, http://www.andinet.com -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.3 for non-commercial use <http://www.pgp.com> iQA/AwUBOZQiD6p3oywyFVUlEQJEEwCgnnFbgzbzkCCtmEc86ZNgwooeOlwAn30H NAiG9ucO/XV8didpB1S8YpGB =fNTq -----END PGP SIGNATURE----- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0