March 2000 - USR-TC - mailman.xmission.com

Re: (usr-tc) tc only 16 modems working
by eric＠dol.net 02 Mar '00

02 Mar '00

select a modem then select edit / select all then go into configuration for all he modems. it is not a pri or nmc setting At 03:00 PM 3/2/00 -0600, you wrote: >which card. I looked at the dual pri and nmc. i don't see a line interface >field. >this worked fine until last Fri. it has not worked past 16 modem since then. >thanks >david > > >>In TCM go to cconfigure / program settings / line interface options >>line interface sourcefield/ it should say pri not nic or t1 >> >>I would recommned that you use the netsvr software as well. >>That can easily make the modems active and make sure the security is >>set to enabled so they accept logons. >> >>If you put a console to the pri console port make sure all the cards >>can be seen from the pri >>thanks >>eric >> >> >>At 08:14 AM 3/1/00 -0600, you wrote: >>>I am still down. does anyone have an idea? >>> >>>show all shows all modems A R P >>>I don't know where to see the priTdm setting >>> >>>HELP >>>thanks >>>david gower >>> >>>>On Mon, 28 Feb 2000, David Gower wrote: >>>> >>>>> I have a TC with dual Pri card and 48 modems on quad cards. it has worked >>>>> fine for 2 years. Friday it stoped authenticating with radius. I got that >>>>> fixed and now only the first 16 modems answer. After that you get a fast >>>busy. >>>>> >>>>> any help would be grately appreciated >>>> >>>>on the netserver, does "show all" show these ports as "A R P"? or "A I P"? >>>>etc? >>>> >>>>check that the line interface is "priTdm" and not "nic". >>>> >>>>also its good to make sure "packet bus answer only" is enabled (i think >>>>this is under call control options) >>>>> >>>>> thanks >>>>> david gower >>>>> ************************* >>>>> * David Gower * >>>>> * Gower.Net * >>>>> * 1607 S. Boldt * >>>>> * Tyler, Texas 75701 * >>>>> ************************* >>>>> >>>>> >>>>> - >>>>> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >>>>> with "unsubscribe usr-tc" in the body of the message. >>>>> For information on digests or retrieving files and old messages send >>>>> "help" to the same address. Do not use quotes in your message. >>>>> >>>> >>>>----------------------------------------------------- >>>>Brian Feeny (BF304) signal(a)shreve.net >>>>318-222-2638 x 109 http://www.shreve.net/~signal >>>>Network Administrator ShreveNet Inc. (ASN 11881) >>>> >>>> >>>>- >>>> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >>>> with "unsubscribe usr-tc" in the body of the message. >>>> For information on digests or retrieving files and old messages send >>>> "help" to the same address. Do not use quotes in your message. >>>> >>>************************* >>>* David Gower * >>>* Gower.Net * >>>* 1607 S. Boldt * >>>* Tyler, Texas 75701 * >>>************************* >>> >>> >>> >>>- >>> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >>> with "unsubscribe usr-tc" in the body of the message. >>> For information on digests or retrieving files and old messages send >>> "help" to the same address. Do not use quotes in your message. >>> >> >> >>- >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. >> >************************* >* David Gower * >* Gower.Net * >* 1607 S. Boldt * >* Tyler, Texas 75701 * >************************* > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) fs: 2- Hiper DSP's $3000 today only
by Steve Rivera 02 Mar '00

02 Mar '00

If you buy them right now. I will do $3000 each per set NAC/NIC 2 available. Must commit to buy today! .................................................... Worldwide Provider of Network Hardware Since 1981. Steve Rivera - v-732-833-2111 / 732-433-5890 24Hr Email Page 7324335890(a)page.nextel.com http://www.ISP-NetworkHardware.com or http://www.wrca.net Cisco, Ascend, Livingston, USR, Microcom, Motorola Computone, Kentrox, Adtran...and more - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) tc only 16 modems working
by david＠gower.net 02 Mar '00

02 Mar '00

which card. I looked at the dual pri and nmc. i don't see a line interface field. this worked fine until last Fri. it has not worked past 16 modem since then. thanks david >In TCM go to cconfigure / program settings / line interface options >line interface sourcefield/ it should say pri not nic or t1 > >I would recommned that you use the netsvr software as well. >That can easily make the modems active and make sure the security is >set to enabled so they accept logons. > >If you put a console to the pri console port make sure all the cards >can be seen from the pri >thanks >eric > > >At 08:14 AM 3/1/00 -0600, you wrote: >>I am still down. does anyone have an idea? >> >>show all shows all modems A R P >>I don't know where to see the priTdm setting >> >>HELP >>thanks >>david gower >> >>>On Mon, 28 Feb 2000, David Gower wrote: >>> >>>> I have a TC with dual Pri card and 48 modems on quad cards. it has worked >>>> fine for 2 years. Friday it stoped authenticating with radius. I got that >>>> fixed and now only the first 16 modems answer. After that you get a fast >>busy. >>>> >>>> any help would be grately appreciated >>> >>>on the netserver, does "show all" show these ports as "A R P"? or "A I P"? >>>etc? >>> >>>check that the line interface is "priTdm" and not "nic". >>> >>>also its good to make sure "packet bus answer only" is enabled (i think >>>this is under call control options) >>>> >>>> thanks >>>> david gower >>>> ************************* >>>> * David Gower * >>>> * Gower.Net * >>>> * 1607 S. Boldt * >>>> * Tyler, Texas 75701 * >>>> ************************* >>>> >>>> >>>> - >>>> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >>>> with "unsubscribe usr-tc" in the body of the message. >>>> For information on digests or retrieving files and old messages send >>>> "help" to the same address. Do not use quotes in your message. >>>> >>> >>>----------------------------------------------------- >>>Brian Feeny (BF304) signal(a)shreve.net >>>318-222-2638 x 109 http://www.shreve.net/~signal >>>Network Administrator ShreveNet Inc. (ASN 11881) >>> >>> >>>- >>> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >>> with "unsubscribe usr-tc" in the body of the message. >>> For information on digests or retrieving files and old messages send >>> "help" to the same address. Do not use quotes in your message. >>> >>************************* >>* David Gower * >>* Gower.Net * >>* 1607 S. Boldt * >>* Tyler, Texas 75701 * >>************************* >> >> >> >>- >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. >> > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > ************************* * David Gower * * Gower.Net * * 1607 S. Boldt * * Tyler, Texas 75701 * ************************* - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) tc only 16 modems working
by Steve Monkhouse 02 Mar '00

02 Mar '00

Are you using the Total Control Manager (TCM) software though ??? highlight the modems in question and follow the previous instructions. Steve -----Original Message----- From: David Gower [SMTP:david@gower.net] Sent: Friday, 3 March 2000 08:01 To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) tc only 16 modems working which card. I looked at the dual pri and nmc. i don't see a line interface field. this worked fine until last Fri. it has not worked past 16 modem since then. thanks david >In TCM go to cconfigure / program settings / line interface options >line interface sourcefield/ it should say pri not nic or t1 > >I would recommned that you use the netsvr software as well. >That can easily make the modems active and make sure the security is >set to enabled so they accept logons. > >If you put a console to the pri console port make sure all the cards >can be seen from the pri >thanks >eric > > >At 08:14 AM 3/1/00 -0600, you wrote: >>I am still down. does anyone have an idea? >> >>show all shows all modems A R P >>I don't know where to see the priTdm setting >> >>HELP >>thanks >>david gower >> >>>On Mon, 28 Feb 2000, David Gower wrote: >>> >>>> I have a TC with dual Pri card and 48 modems on quad cards. it has worked >>>> fine for 2 years. Friday it stoped authenticating with radius. I got that >>>> fixed and now only the first 16 modems answer. After that you get a fast >>busy. >>>> >>>> any help would be grately appreciated >>> >>>on the netserver, does "show all" show these ports as "A R P"? or "A I P"? >>>etc? >>> >>>check that the line interface is "priTdm" and not "nic". >>> >>>also its good to make sure "packet bus answer only" is enabled (i think >>>this is under call control options) >>>> >>>> thanks >>>> david gower >>>> ************************* >>>> * David Gower * >>>> * Gower.Net * >>>> * 1607 S. Boldt * >>>> * Tyler, Texas 75701 * >>>> ************************* >>>> >>>> >>>> - >>>> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >>>> with "unsubscribe usr-tc" in the body of the message. >>>> For information on digests or retrieving files and old messages send >>>> "help" to the same address. Do not use quotes in your message. >>>> >>> >>>----------------------------------------------------- >>>Brian Feeny (BF304) signal(a)shreve.net >>>318-222-2638 x 109 http://www.shreve.net/~signal >>>Network Administrator ShreveNet Inc. (ASN 11881) >>> >>> >>>- >>> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >>> with "unsubscribe usr-tc" in the body of the message. >>> For information on digests or retrieving files and old messages send >>> "help" to the same address. Do not use quotes in your message. >>> >>************************* >>* David Gower * >>* Gower.Net * >>* 1607 S. Boldt * >>* Tyler, Texas 75701 * >>************************* >> >> >> >>- >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. >> > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > ************************* * David Gower * * Gower.Net * * 1607 S. Boldt * * Tyler, Texas 75701 * ************************* - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Quad auto-busy and 4.2.32 (Again...)
by Charles Sprickman 02 Mar '00

02 Mar '00

Hi, I know I've already posted this, but it seems that we have a bug on our hands in 4.2.32 that affects quad modems. I received a few private replies last time essentially saying "I see it too"... Can anyone else confirm this behaviour? You will not see this unless you either: -monitor your chassis for modem/line status -go into tcm and run performance monitor on your T1/PRI card and look for modems in state "busy-out" (it's in the default PerfMon setup). If you do, please reply. I don't have a service contract to open a bug report with, but perhaps someone else seeing it does... Or if Krish or Mike are still around, perhaps they have a workaround... See below for a bit more info. Thanks, Charles ---------- Forwarded message ---------- Date: Thu, 2 Mar 2000 16:09:16 -0500 (EST) Subject: TCHmon results Debug is 1. NMC - NMC temperature high - 33 deg. C T1 card on chassis 216.223.xxx.xxx has unavailable lines: mdmBusyOut(10) T1 card on chassis 216.223.xxx.xxx has unavailable lines: mdmBusyOut(10) T1 - 2 modems unavailable on PRI/T1 card on chassis 216.223.xxx.xxx NMC - NMC temperature high - 33 deg. C T1 card on chassis 216.223.xxx.xxx has unavailable lines: mdmBusyOut(10) T1 - 1 modems unavailable on PRI/T1 card on chassis 216.223.xxx.xxx NMC - NMC temperature high - 31 deg. C T1 card on chassis 216.223.xxx.xxx has unavailable lines: mdmBusyOut(10) T1 card on chassis 216.223.xxx.xxx has unavailable lines: mdmBusyOut(10) T1 - 2 modems unavailable on PRI/T1 card on chassis 216.223.xxx.xxx etc... - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) tc only 16 modems working
by eric＠dol.net 02 Mar '00

02 Mar '00

In TCM go to cconfigure / program settings / line interface options line interface sourcefield/ it should say pri not nic or t1 I would recommned that you use the netsvr software as well. That can easily make the modems active and make sure the security is set to enabled so they accept logons. If you put a console to the pri console port make sure all the cards can be seen from the pri thanks eric At 08:14 AM 3/1/00 -0600, you wrote: >I am still down. does anyone have an idea? > >show all shows all modems A R P >I don't know where to see the priTdm setting > >HELP >thanks >david gower > >>On Mon, 28 Feb 2000, David Gower wrote: >> >>> I have a TC with dual Pri card and 48 modems on quad cards. it has worked >>> fine for 2 years. Friday it stoped authenticating with radius. I got that >>> fixed and now only the first 16 modems answer. After that you get a fast >busy. >>> >>> any help would be grately appreciated >> >>on the netserver, does "show all" show these ports as "A R P"? or "A I P"? >>etc? >> >>check that the line interface is "priTdm" and not "nic". >> >>also its good to make sure "packet bus answer only" is enabled (i think >>this is under call control options) >>> >>> thanks >>> david gower >>> ************************* >>> * David Gower * >>> * Gower.Net * >>> * 1607 S. Boldt * >>> * Tyler, Texas 75701 * >>> ************************* >>> >>> >>> - >>> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >>> with "unsubscribe usr-tc" in the body of the message. >>> For information on digests or retrieving files and old messages send >>> "help" to the same address. Do not use quotes in your message. >>> >> >>----------------------------------------------------- >>Brian Feeny (BF304) signal(a)shreve.net >>318-222-2638 x 109 http://www.shreve.net/~signal >>Network Administrator ShreveNet Inc. (ASN 11881) >> >> >>- >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. >> >************************* >* David Gower * >* Gower.Net * >* 1607 S. Boldt * >* Tyler, Texas 75701 * >************************* > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) tc only 16 modems working
by david＠gower.net 02 Mar '00

02 Mar '00

I am still down. does anyone have an idea? show all shows all modems A R P I don't know where to see the priTdm setting HELP thanks david gower >On Mon, 28 Feb 2000, David Gower wrote: > >> I have a TC with dual Pri card and 48 modems on quad cards. it has worked >> fine for 2 years. Friday it stoped authenticating with radius. I got that >> fixed and now only the first 16 modems answer. After that you get a fast busy. >> >> any help would be grately appreciated > >on the netserver, does "show all" show these ports as "A R P"? or "A I P"? >etc? > >check that the line interface is "priTdm" and not "nic". > >also its good to make sure "packet bus answer only" is enabled (i think >this is under call control options) >> >> thanks >> david gower >> ************************* >> * David Gower * >> * Gower.Net * >> * 1607 S. Boldt * >> * Tyler, Texas 75701 * >> ************************* >> >> >> - >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. >> > >----------------------------------------------------- >Brian Feeny (BF304) signal(a)shreve.net >318-222-2638 x 109 http://www.shreve.net/~signal >Network Administrator ShreveNet Inc. (ASN 11881) > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > ************************* * David Gower * * Gower.Net * * 1607 S. Boldt * * Tyler, Texas 75701 * ************************* - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

Re: (usr-tc) HiperDSP rev
by jeff.binkley＠asacomp.com 01 Mar '00

01 Mar '00

u>> I just noticed today a large number of channels locked out on 3 u>> modem cards. One of them had all but the last one and a D-channel u>> left enabled! The others were 1/3 to 1/2 dead, all the modems u>> locked out in pairs. This has probably been going on a while, but u>> since we reboot everything on Sundays, I just happened to be looking u>> at these chassis late enough in the week to see the problem today. u> u>you actually reboot everything routinely (tc hubs)? Do others do u>this? Whats the man reason (i know i know, clear all the bugs!) I only reboot when I load new software. Last reboot was December. Prior to that it was May. Jeff Binkley ASA Network Computing CMPQwk 1.42-21 9999 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 7

(usr-tc) Eicon ISDN problems
by K Mitchell 01 Mar '00

01 Mar '00

Is anybody aware of any connection issues with Eicon ISDN modems connecting to HiPer DSPs? I have a customer that states he's only able to download at 3-4k speeds through our system while he's able to download at 10k+ through other systems. He has verified his config with Eicon support and installed their latest firmware with no improvement. Thanks, -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Hiper TCs and Memory...
by Stephen Amadei 29 Feb '00

29 Feb '00

Hi guys, I was wondering if adding memory to my Hiper TCs would help performance. Is there a guide to how much memory is needed for X number of DSP cards? I am up to 8 DSPs in one of my chassis, and I'm wondering if the standard amount of RAM is hurting performance. Thanx in advance. I am running the latest TCS 3.6 code and IP only. ----Steve Stephen Amadei Dandy.NET CTO Atlantic City, NJ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2