March 2000 - USR-TC - mailman.xmission.com

RE: (usr-tc) Advice needed
by Dwayne Varey 12 Mar '00

12 Mar '00

Mike, What is the oid to graph the value with MRTG? Thanks for the advice. > -----Original Message----- > From: Mike Andrews [mailto:mandrews@bit0.com] > Sent: Monday, March 13, 2000 10:47 AM > To: 'usr-tc(a)lists.xmission.com' > Subject: RE: (usr-tc) Advice needed > > > Actually, 3com explained this little quirk a while ago (check the > archives). For some reason, they designed it to show CPU utilization > above average, rather than an absolute value. i.e. if you > normally run at > 20% cpu usage, and suddenly peak to 30%, in theory "show cpu" > would show > 10%. And it *does* on occasion show a non-zero value (we > graph it with > MRTG) -- it's just really rare. So it's not broken, just > designed really > really strangely. :) (An absolute value would be much more useful.) > > > Mike Andrews (MA12) * mandrews(a)dcr.net * http://www.bit0.com/ > VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY > Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville > "Don't sweat the petty things, and don't pet the sweaty things." > > On Mon, 13 Mar 2000, Dwayne Varey wrote: > > > If this command doesn't work, is there any that will? > > > > > -----Original Message----- > > > From: Paul Farber [mailto:farber@admin.f-tech.net] > > > Sent: Saturday, March 11, 2000 2:32 AM > > > To: usr-tc(a)lists.xmission.com > > > Subject: Re: (usr-tc) Advice needed > > > > > > > > > Don't use sho CPU utilization: > > > > > > HiPer>> sho cpu utILIZATION > > > > > > CPU Utilization: > > > Instantaneous : 0% > > > Last Minute : 0% > > > Last Hour : 0% > > > Last Day : 0% > > > > > > This is with 60+ calls... ANOTHER 3COM BUG! > > > > > > > > > Paul Farber > > > Farber Technology > > > farber(a)admin.f-tech.net > > > Ph 570-628-5303 > > > Fax 570-628-5545 > > > > > > On Fri, 10 Mar 2000, Dwayne Varey wrote: > > > > > > > What is the best way to determine the amount of load a > > > hiperarc is under? > > > > Is there an oid for the total control chassis back plane > > > usage, or something > > > > similar? How do you determine the amount of processor > > > usage on a total > > > > control chassis? Any advice would be appreciated. > > > > > > > > > ________________________________________________ > > > > > Dwayne Varey > > > > > 2nd Level Support > > > > > WestNet - WA's Statewide Internet Provider > > > > > Phone: 92182600 - Fax: 92182666 > > > > > http://www.wn.com.au > > > > > _________________________________________________ > > > > > > > > > > > > > > > > > > - > > > > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > > > > with "unsubscribe usr-tc" in the body of the message. > > > > For information on digests or retrieving files and old > > > messages send > > > > "help" to the same address. Do not use quotes in your message. > > > > > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old > messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Advice needed
by Dwayne Varey 12 Mar '00

12 Mar '00

If this command doesn't work, is there any that will? > -----Original Message----- > From: Paul Farber [mailto:farber@admin.f-tech.net] > Sent: Saturday, March 11, 2000 2:32 AM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) Advice needed > > > Don't use sho CPU utilization: > > HiPer>> sho cpu utILIZATION > > CPU Utilization: > Instantaneous : 0% > Last Minute : 0% > Last Hour : 0% > Last Day : 0% > > This is with 60+ calls... ANOTHER 3COM BUG! > > > Paul Farber > Farber Technology > farber(a)admin.f-tech.net > Ph 570-628-5303 > Fax 570-628-5545 > > On Fri, 10 Mar 2000, Dwayne Varey wrote: > > > What is the best way to determine the amount of load a > hiperarc is under? > > Is there an oid for the total control chassis back plane > usage, or something > > similar? How do you determine the amount of processor > usage on a total > > control chassis? Any advice would be appreciated. > > > > > ________________________________________________ > > > Dwayne Varey > > > 2nd Level Support > > > WestNet - WA's Statewide Internet Provider > > > Phone: 92182600 - Fax: 92182666 > > > http://www.wn.com.au > > > _________________________________________________ > > > > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Hiper DSP Transmit level setting
by Clint R. Sparks 12 Mar '00

12 Mar '00

I am curious to see what others using Hiper DSP code 2.0.51 are using for their Transmit Level (-db) setting on their Hiper DSP cards? Ours are currently at 12 -db. Thanks, Clint R. Sparks ComQuest Internet Services csparks(a)cqc.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 5

RE: (usr-tc) ****SOLVED***** Websites failing on TCHub vs Ascend... Where to start?
by Robb Bryn 10 Mar '00

10 Mar '00

I started at 1514 per Source Technology's recommendation and found that 1514 fixed "most" of the problems, began incrementing by 4 until it worked on all sites, ended at 1518. Thanks Robb Bryn > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Randy McMillan > Sent: Friday, March 10, 2000 5:12 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) ****SOLVED***** Websites failing on TCHub vs > Ascend... Where to start? > > > How did you decide on 1518 for the MTU size? > > Randy McMillan > PacInfo > > ----- Original Message ----- > From: Robb Bryn <rbryn(a)cape-fear.net> > To: <usr-tc(a)lists.xmission.com> > Sent: Friday, March 10, 2000 11:12 AM > Subject: (usr-tc) ****SOLVED***** Websites failing on TCHub > vs Ascend... > Where to start? > > > > Problem Solved... > > As everyone suspected - it was an MTU problem. More specifically a > problem > > in the MTU size. Setting the MTU size to 1500 via Radius > did NOT fix the > > problem. After a few enlightening words from the folks at Source > > Technology, and the comments received via this list, I set > the MTU size to > > 1518 in Radius AND on the Default user in the ARC itself. > Everything now > > works flawlessly. > > > > I appreciate everyone's help. > > > > Thanks > > Robb Bryn > > > > > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) list of USR VSA's for RADIUS
by Dave Kitabjian 10 Mar '00

10 Mar '00

I'd be interested in this list, too, if you ever find it! Dave On Thursday, March 09, 2000 8:29 PM, Paul Farber [SMTP:farber@admin.f-tech.net] wrote: > anyone have a URL or document that describes 3COM's VSA sent via radius? > > Paul Farber > Farber Technology > farber(a)admin.f-tech.net > Ph 570-628-5303 > Fax 570-628-5545 > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) hyper arc reste
by David Hamilton 10 Mar '00

10 Mar '00

I need to reset a hyper arc to factory defaults? I don't have the telnet password or the console password. I have physical access. Is there a jumper setting that will do this? David Hamilton - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 4

(usr-tc) OID for span line in HiperDSP?
by Jason Englander 10 Mar '00

10 Mar '00

Anyone know the OID to check up/down/loop/whatever of a T1 plugged into a HiperDSP? Thanks, Jason -- Jason Englander <jason(a)interl.net> Systems Administrator - InterLink L.C. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 7

(usr-tc) Advice needed
by Dwayne Varey 10 Mar '00

10 Mar '00

What is the best way to determine the amount of load a hiperarc is under? Is there an oid for the total control chassis back plane usage, or something similar? How do you determine the amount of processor usage on a total control chassis? Any advice would be appreciated. > ________________________________________________ > Dwayne Varey > 2nd Level Support > WestNet - WA's Statewide Internet Provider > Phone: 92182600 - Fax: 92182666 > http://www.wn.com.au > _________________________________________________ > > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) list of USR VSA's for RADIUS
by Paul Farber 09 Mar '00

09 Mar '00

anyone have a URL or document that describes 3COM's VSA sent via radius? Paul Farber Farber Technology farber(a)admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Websites failing on TCHub vs Ascend... Where to star t?
by Robb Bryn 09 Mar '00

09 Mar '00

I'm pulling my hair out on this one. The chassis is in public IP space (208.133.28.2 & 208.133.28.51), I am not blocking ICMP traffic in any way. I've set via RADIUS on all users to a default MTU of 1500 (Chassis reports user MTU set to 1500 when doing a "show remote user"). I can ping and telnet to both sites from a dialup. Just can't get to them with a browser. On stanews.wilmington.net I can get text... no pictures and it's dog slow. On www.genforum.com and www.genealogy.com it doesn't come up in the browser at all (reports no connection to the server). I'm clueless on this one...Sounds like a dead ringer for MTU,, but can't figure. But on my Ascend & Portmaster... No problems. Thanks Robb Bryn > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Aaron Nabil > Sent: Wednesday, March 08, 2000 7:49 PM > To: 'usr-tc(a)lists.xmission.com' > Subject: Re: (usr-tc) Websites failing on TCHub vs Ascend... Where to > start? > > Here's another idea. It could be a MTU discovery problem. If you have either numbered your chassis out of private IP space or are blocking ICMP, that might be what's causing it. This might be another hint (I was hoping they were Solaris, since that would reinforce the MTU theory)... ridge.spiritone.com% telnet www.genforum.com Trying 216.15.177.242... Connected to www.genforum.com. Escape character is '^]'. Red Hat Linux release 5.2 (Apollo) Kernel 2.0.36 on an i686 login: login: ridge.spiritone.com% telnet starnews.wilmington.net Trying 205.218.216.4... Connected to starnews.wilmington.net. Escape character is '^]'. Red Hat Linux release 5.2 (Apollo) WISE release 1.22 (i686 optimized) Kernel 2.2.13 on an i686 login: login: -- Aaron Nabil - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1