October 2000 - USR-TC - mailman.xmission.com

RE: (usr-tc) WTB: USR Equipment
by Brian Becker 13 Oct '00

13 Oct '00

Hi Steve, I need a new(er) chassis. Arc & NMC welcome as well. Brian -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Steve Rivera -www.wrca.net Sent: Friday, October 13, 2000 4:39 PM To: usr-tc(a)lists.xmission.com Subject: (usr-tc) WTB: USR Equipment I am in the market for the following equipment. Quad Digital Modems Hiper NMC Hiper DSP Hiper ARC NMC v90 enabled Netserver PRI Dual PRI Cable HD Mini 60 pin to 4- port RS232 cables (analog applications) Please email with availability. Qty's welcome :) Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: USR Equipment
by Steve Rivera -www.wrca.net 13 Oct '00

13 Oct '00

I am in the market for the following equipment. Quad Digital Modems Hiper NMC Hiper DSP Hiper ARC NMC v90 enabled Netserver PRI Dual PRI Cable HD Mini 60 pin to 4- port RS232 cables (analog applications) Please email with availability. Qty's welcome :) Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) rebooting a nmc card with snmp
by Brian Becker 12 Oct '00

12 Oct '00

Sure, but we are adding a feature to Total Scrutinizer (http://totalscrutinizer.com) that allows the Tech Support staff to disconnect a user from the TC box. So since Total Scrutinizer operates via snmp, resetting a modem seemed like the best way to make it happen--especially since we are finalizing our Netserver version and Netserver doesn't accept any SNMP requests. Thanks, Brian Brian Becker President, Poplar Bluff Internet, Inc. Home of TotallyFabricated.com Software: Total Scrutinizer (www.TotalScrutinizer.com) - Tech Support Just Got Easier! WebGabber (www.WebGabber.com) - html-based Chat Software -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Dave Lajoie Sent: Thursday, October 12, 2000 10:18 AM To: usr-tc(a)lists.xmission.com Subject: RE: (usr-tc) rebooting a nmc card with snmp Brian, I just login to ARC cli and do a disc user 'username'. Dave Lajoie Remote Access Administrator North Country Internet Access E-Mail: dave(a)ncia.net On Thu, 12 Oct 2000, Brian Becker wrote: > How do you kick a single user off if you have the OID for that slot/modem? > > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Michael Fingerson > Sent: Wednesday, October 11, 2000 10:38 AM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) rebooting a nmc card with snmp > > > Does this go before the reset or after? I couldn't find any documentation > on setting this to 0 in the mib. This is what I show: > > nmcCmdParam OBJECT-TYPE > SYNTAX OCTET STRING (SIZE(0..24)) > ACCESS read-write > STATUS mandatory > DESCRIPTION > "This object contains parameters that are specific to the > particular command being issued. In some cases, there will > be no additional parameters required." > ::= { nmcCmd 5 } > > nmcCmdResult OBJECT-TYPE > SYNTAX INTEGER{ > none(1), > success(2), > inProgress(3), > notSupported(4), > unAbleToRun(5), > aborted(6), > failed(7) > > > > At 07:39 PM 10/9/2000 -0400, you wrote: > >Try throwing .1.3.6.1.4.1.429.1.2.4.5 i 0 (cmdParam=0) in there too. > >The force oid isn't required. > > > > > >Mike Andrews (MA12) * mandrews(a)dcr.net * http://www.bit0.com/ > >VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY > >Dialup/ADSL/ISDN/T1 Internet access for Frankfort KY and surrounding counties > >www.fark.com: If it's not news, it's Fark. (Or something like that.) > > > >On Mon, 9 Oct 2000, Michael Fingerson wrote: > > > > > (correction to the previous submission) > > > > > > Does anyone know the oid's to reset a NMC card? > > > > > > I have tried: > > > > > > snmpset hostname private .1.3.6.1.4.1.429.1.2.4.4 i 2 (force) > > > snmpset hostname private .1.3.6.1.4.1.429.1.2.4.3 i 6 (software reset) > > > > > > I have been able to reset a dsp card with: > > > > > > snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.5.# i 1 (force) > > > snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.4.# i 4 (reset) > > > > > > (where # is the slot # of the card being reset) > > > > > > > > > > > > > > > > > > > > > > > > Michael Fingerson > > > Network Services Engineer mjfinger(a)rconnect.com > > > 416 South Broadway Rochester, MN 55904 > > > (507) 536-0000 x106 http://www.rconnect.com > > > RURAL CONNECTIONS - a OneMain.com company > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > > >- > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > Michael Fingerson > Network Services Engineer mjfinger(a)rconnect.com > 416 South Broadway Rochester, MN 55904 > (507) 536-0000 x106 http://www.rconnect.com > RURAL CONNECTIONS - a OneMain.com company > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) rebooting a nmc card with snmp
by Brian Becker 12 Oct '00

12 Oct '00

How do you kick a single user off if you have the OID for that slot/modem? -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Michael Fingerson Sent: Wednesday, October 11, 2000 10:38 AM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) rebooting a nmc card with snmp Does this go before the reset or after? I couldn't find any documentation on setting this to 0 in the mib. This is what I show: nmcCmdParam OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..24)) ACCESS read-write STATUS mandatory DESCRIPTION "This object contains parameters that are specific to the particular command being issued. In some cases, there will be no additional parameters required." ::= { nmcCmd 5 } nmcCmdResult OBJECT-TYPE SYNTAX INTEGER{ none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), aborted(6), failed(7) At 07:39 PM 10/9/2000 -0400, you wrote: >Try throwing .1.3.6.1.4.1.429.1.2.4.5 i 0 (cmdParam=0) in there too. >The force oid isn't required. > > >Mike Andrews (MA12) * mandrews(a)dcr.net * http://www.bit0.com/ >VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY >Dialup/ADSL/ISDN/T1 Internet access for Frankfort KY and surrounding counties >www.fark.com: If it's not news, it's Fark. (Or something like that.) > >On Mon, 9 Oct 2000, Michael Fingerson wrote: > > > (correction to the previous submission) > > > > Does anyone know the oid's to reset a NMC card? > > > > I have tried: > > > > snmpset hostname private .1.3.6.1.4.1.429.1.2.4.4 i 2 (force) > > snmpset hostname private .1.3.6.1.4.1.429.1.2.4.3 i 6 (software reset) > > > > I have been able to reset a dsp card with: > > > > snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.5.# i 1 (force) > > snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.4.# i 4 (reset) > > > > (where # is the slot # of the card being reset) > > > > > > > > > > > > > > > > Michael Fingerson > > Network Services Engineer mjfinger(a)rconnect.com > > 416 South Broadway Rochester, MN 55904 > > (507) 536-0000 x106 http://www.rconnect.com > > RURAL CONNECTIONS - a OneMain.com company > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. Michael Fingerson Network Services Engineer mjfinger(a)rconnect.com 416 South Broadway Rochester, MN 55904 (507) 536-0000 x106 http://www.rconnect.com RURAL CONNECTIONS - a OneMain.com company - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) NMC Code v7.1.8 problem
by Marshall Morgan 12 Oct '00

12 Oct '00

Using CT1 trunks for years on a 16M/486 based NMC. Upgraded from 6.x to 7.1.8 and now the NMC thinks the number of channels on the DSP is 23 (instead of 24). WTF? Anyone know a fix for this? Rebooted the NMC and DSP (v2.1.9)'s and it's still that way. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 3

Re: (usr-tc) rebooting a nmc card with snmp
by Michael Fingerson 11 Oct '00

11 Oct '00

Does this go before the reset or after? I couldn't find any documentation on setting this to 0 in the mib. This is what I show: nmcCmdParam OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..24)) ACCESS read-write STATUS mandatory DESCRIPTION "This object contains parameters that are specific to the particular command being issued. In some cases, there will be no additional parameters required." ::= { nmcCmd 5 } nmcCmdResult OBJECT-TYPE SYNTAX INTEGER{ none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), aborted(6), failed(7) At 07:39 PM 10/9/2000 -0400, you wrote: >Try throwing .1.3.6.1.4.1.429.1.2.4.5 i 0 (cmdParam=0) in there too. >The force oid isn't required. > > >Mike Andrews (MA12) * mandrews(a)dcr.net * http://www.bit0.com/ >VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY >Dialup/ADSL/ISDN/T1 Internet access for Frankfort KY and surrounding counties >www.fark.com: If it's not news, it's Fark. (Or something like that.) > >On Mon, 9 Oct 2000, Michael Fingerson wrote: > > > (correction to the previous submission) > > > > Does anyone know the oid's to reset a NMC card? > > > > I have tried: > > > > snmpset hostname private .1.3.6.1.4.1.429.1.2.4.4 i 2 (force) > > snmpset hostname private .1.3.6.1.4.1.429.1.2.4.3 i 6 (software reset) > > > > I have been able to reset a dsp card with: > > > > snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.5.# i 1 (force) > > snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.4.# i 4 (reset) > > > > (where # is the slot # of the card being reset) > > > > > > > > > > > > > > > > Michael Fingerson > > Network Services Engineer mjfinger(a)rconnect.com > > 416 South Broadway Rochester, MN 55904 > > (507) 536-0000 x106 http://www.rconnect.com > > RURAL CONNECTIONS - a OneMain.com company > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. Michael Fingerson Network Services Engineer mjfinger(a)rconnect.com 416 South Broadway Rochester, MN 55904 (507) 536-0000 x106 http://www.rconnect.com RURAL CONNECTIONS - a OneMain.com company - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Error codes on HDSP lamps?
by Jonathan Byrne 11 Oct '00

11 Oct '00

Does anyone know if lamp patterns on a HiperDSP have error code meanings? I have a situation where a HiperDSP (2.1.9) connected to a PRI has the lpbk/d-alm lamp on red. The telco (NTT) says there is no problem with the PRI and their tests indicate the CPE is not powered up. The NTT DSU shows no alarms. I have replaced the card with another one, and see the same problem. Moved it to another slot in the chassis. Same problem. If I power-cycle the card, I see the following after the boot process: rn/fl orange lpbk/d-alm red activity lamps (from the top) 3,4,7,8 red Then after a few seconds, rn/fl and car go to green, the modem activity lamps go out, and lpbk/d-alm stays red. The previous card exihibited the same behavior, and reflashing has no effect on this. Is this pattern of lights an error code or coincidence? This would all seem to indicate the PRI, but the telco says it's not. Any thoughts? TIA, Jonathan Byrne Engineering Division Exodus Communications K.K. http://www.exodus.co.jp/ Tel: +81 3-5334-1700 Fax: +81 3-5334-1702 Direct: +81 3-5334-1756 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 7

(usr-tc) 1000 Ports or more / what code are you running
by Marshall Morgan 11 Oct '00

11 Oct '00

ALL: On a DSP chassis with 2-14 DSP Cards (PRI or CT1) and 1-2 ARCs - IP only no RIP or OSPF routing protocols - what code version(s) - newer info required. NMC: ARC: DSP: Help me out - as I don't want to "upgrade" my customers to other ISPs due to our code problems. TIA. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) "_"command
by Harry_Wang＠3com.com 10 Oct '00

10 Oct '00

Does anyone have a list of command which begin with "_", the only one I know is "_authentication". I think all these command should be very helpful for troubleshooting. Any idea is appreciated. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) rebooting a nmc card with snmp
by Michael Fingerson 09 Oct '00

09 Oct '00

(correction to the previous submission) Does anyone know the oid's to reset a NMC card? I have tried: snmpset hostname private .1.3.6.1.4.1.429.1.2.4.4 i 2 (force) snmpset hostname private .1.3.6.1.4.1.429.1.2.4.3 i 6 (software reset) I have been able to reset a dsp card with: snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.5.# i 1 (force) snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.4.# i 4 (reset) (where # is the slot # of the card being reset) Michael Fingerson Network Services Engineer mjfinger(a)rconnect.com 416 South Broadway Rochester, MN 55904 (507) 536-0000 x106 http://www.rconnect.com RURAL CONNECTIONS - a OneMain.com company - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1