October 2000 - USR-TC - mailman.xmission.com

(usr-tc) Netserver 8 Software?
by Charles Sprickman 20 Oct '00

20 Oct '00

I dug an old Netserver 8 v.34+ out of storage, and thought I'd load up the latest code, but I don't even *see* this product anywhere on totalservice. Anyone have any pointers? Can this be upgraded to v.90? Thanks, Charles | Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork(a)inch.com | access(a)inch.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Hiper Arc Prompts
by Kevin Hemsley 20 Oct '00

20 Oct '00

I would like to change the login prompts on my Hiperarcs to be different for each modem. I can change the prompt for each modem using HARM, but I can't find a command using the CLI. The closest I can find is: set modem_GROUP slot:1 prompt "some prompt:" The problem is that this sets the prompt for the entire group, not for each modem. I assume that if I can change the prompt for each modem using HARM, that there must be a CLI command to do the same. Also, do the Hiper ARCs provide any system variables that can be used in prompts or messages, such as the current slot or modem? Such as prompt "slot:%slot/mod:%modem Login:" ---------------------------------- Kevin Hemsley Systems Engineer Microserv Computer Technologies, Inc. kev(a)ida.net KB7TYA - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Modem Init Strings
by Brian Becker 20 Oct '00

20 Oct '00

Hey, Can any hand out modem init strings they use for their HiperDSPs? Brian - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) New USR stuff...
by Stephen Amadei 19 Oct '00

19 Oct '00

Hey guys. While reading through Boardwatch, I read an ad from Source Technologies and how V.92 is now possible with the TC. However, peruseing the 3Com site was useless... how many arms, legs and children is 3Com going to want for us to upgrade to V.92? And what equipment will upgrade? Next, while perusing the 3Com site, I tripped over the Total Control 2000 Access Multiplexer. Apparently this monster has DSP cards that run 672 ports at a shot. 3Com is selling these through it's online store, but the link didn't work. How much are these monsters going to go for? $100K? What else is going on with this new toy? Or do I have to add 1 and 1? Is the V92 upgrade going to need us to upgrade to the TC2K? 8-0 ----Steve Stephen Amadei Dandy.net CTO Atlantic City, NJ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FS: USR/3com EdgeServer PRO
by Steve Rivera -www.wrca.net 19 Oct '00

19 Oct '00

I was contacted by several people on this list regarding the Edge Server I had in stock. At the time I wasnt able to supply the PRO version. Currently I have 1- EdgeServer PRO card available for sale. Please contact me via email or phone for further details. Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Still buying USR hardware
by Steve Rivera -www.wrca.net 19 Oct '00

19 Oct '00

WR Communication Associates (WRCA) is looking to buy the following USR hardware: TWH Quad RS232 NIC Accessory (CABLE that attaches to modem nics) Netserver PRI's NMC v90 enabled Hiper NMC Hiper ARC Hiper DSP Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 6

(usr-tc) Psycho hosemonster DSP/Dual PRI problem.
by Jaye Mathisen 19 Oct '00

19 Oct '00

Moving some modems to a new office space. Rack is a Dual PRI with the 12 quad modem cards, and 2 24 port HiperDSP cards. If I dial into the quad modem cards, I get a V.90 connection every time. If I take that same span, and plug it into the DSP card, I can't get better than a 14400, and in fact, don't even hear the V.90 tones during the negotiation. Nothing I do seems to make it work. I will confess that I'm a bit out of practice with the TC gear, but I'm still stumped. Threw a t-berd on the monitor ports on the DSP card, didn't find anything unusual, all within T1 specs. Any ideas appreciated. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) TCH Hub latchup problems
by Mark Thornton 17 Oct '00

17 Oct '00

Since we upgraded to the latest code we have seen an noticeable increase in the number times where an entire chassis is latched up and will not accept calls. In the case this morning the NMC was responding OK but I could not log into the HiperArc via telnet. I tried reseting the HiperArc via TCH Manager from home but that did not seem to work. I came in to the office and did a complete power cycle and it is working again. I will dig through my records to be sure but this seems to be happening every week or so since the upgrade on a couple of my chassis. I never had to reboot a chassis prior to the upgrade (though I did have problems with modem connections :o). Any ideas on what could be causing the problem? The only thing that was intentionally changed was the software code. Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: HDM (nic only)
by Brian 16 Oct '00

16 Oct '00

I am looking for an HDM (nic only). If you have one, please let me know a price. Thanks. Brian ----------------------------------------------- Brian Feeny, CCNP, CCDP signal(a)shreve.net Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: V90 enabled NMC cards
by Steve Rivera -www.wrca.net 16 Oct '00

16 Oct '00

I know some one has to be sitting on some of these. I am in the market for v90 enabled, not flashed NMC cards w/ nics need immediately. Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2