October 1999 - USR-TC - mailman.xmission.com

Re: (usr-tc) Simple question
by Brett Murphy 04 Oct '99

04 Oct '99

Netserver, from console set password <your_password> set prompt your_prompt> set domain your_domain.com.au set namesvc dns set nameserver 202.3.4.5 (your DNS) set sysname your_sysname set net0 address 202.7.6.5 (your netserver IP address) set net0 netmask 255.255.255.0 (your netmask) set gateway 202.7.6.1 (your gateway) set modem density all 4 (4 for quad cards) set modem startslot 2 (start at slot 2 if you have a dual pri card or T1) set modem s1-s56 active (this is for 14 quad cards) set all message ^first line of message^second line of message^^ set accounting 202.7.6.2 (radius accounting server) set authentic 202.7.6.3 (radius auth server) set alternate 202.7.6.4 (backup radius auth server) set assigned 202.9.8.1 (starting ip pool address for PPP logins) set secret your_radius_secret set all security on (this allows console based login as well as PAP/etc) set snmp on save all reboot All the best, Brett Murphy Technical Manager, Alphalink (Australia) PTY LTD ph: +61 3 9486-8844 fax: +61 3 9486-6822 email: me(a)murf.net The contents of this email message may not be quoted, copied, reproduced or published in part or in whole, without the written authorization of Brett Murphy, Director, Alphalink (Australia) Pty Ltd. -----Original Message----- From: Brian Hitchcock <brianh(a)kcweb.net> To: usr-tc(a)lists.xmission.com <usr-tc(a)lists.xmission.com> Date: Tuesday, 5 October 1999 5:29 Subject: (usr-tc) Simple question >I have what I am sure is a very simple question for most of you to answer. >But what is the command to change the IP address of the NET0 interface? > >Brian Hitchcock >KC Web > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) TimeZone Reality Check for ARC's
by Scott Trautman 04 Oct '99

04 Oct '99

ARC's only do GMT? Time IS correct w/NTP, but could find nothing on setting TimeZone. Makes "list connections"'s look weird with the login times, but that's about it. SMT Scott M. Trautman 800-482-4638 Global Dialog Internet 608-240-4638,4637fax 2810 Crossroads, STE LL2 scott(a)gdinet.com Madison WI 53718 http://www.gdinet.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 10

(usr-tc) testing csu/dsu on DSP
by Jeff Mcadams 04 Oct '99

04 Oct '99

Hi folks... I've got a CSU/DSU on a HiPer DSP that I *think* may be going bad...not really sure though. I'd like to be able to test it, but I'm not really sure how. I've got some equipment that can send BERT patterns at it, but I'm not sure how to set up the DSP to actually deal with that. I've gotten it into a line loopback, so I can bounce the pattern off the loopback, but that's not terribly helpful when you're trying to test the actual CSU/DSU. :/ I've found that the DSP can send, what appears to be a quasi-random signal, but I can't get it to sync up when sending it. My current setup to try to test this is the DSP card is connected via a "null-t1" cable to my other equipment (a Cisco 7507 with a multi-channel port adapter...has integrated CSU/DSU's and ability to run quite a few different BERT patterns...more capability in this area from 3Com would be *really* cool to have ;). I can get the T1's to sync up normally (non-BERT) by setting the clock source on the Cisco to internal (which is expected...*someone* has to generate clock...although it seems they'll coast for a while with both pulling it off the line without falling out of sync). I can also set up a loopback on the DSP, and run anything I want from the cisco and it works (BERT, true T1 signalling, etc.), but I can't reverse it. I have tried setting the cisco to have a loopback and run qrs from the DSP (available via the "cmd sendcode qrs" command on the console) but it never seems to want to sync up that way. I've tried all different combinations of clocking sources on the DSP and cisco with the DSP running qrs, but never can get it to be happy. Anyone have any knowledge about, or experience with, testing a DSP CSU/DSU for problems using BERT patterns and the like? -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Netserver problem
by Scott Trautman 04 Oct '99

04 Oct '99

Time to send it back to 3Com to have them look at it. That would be my next step. SMT > -----Original Message----- > From: Dataheart [mailto:lists@dataheart.net] > Sent: Monday, October 04, 1999 1:45 AM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) Netserver problem > > > ok, > I have re-flashed the card and still the same thing flashes > 13 times then > flashes quickly then solid green and the loop is endless. > Ths console is also blank. > > Any other ideas? > > Thanks, > Aaron > > Scott Trautman wrote: > > > Anything on the console port? Bootup messages? (actually > don't think you > > would see those if I recall correctly, just a login prompt > when it is up...) > > > > Get out the pcsdl, source and re-upload it via serial > cable. Hint: set your > > serial port to at least 57600 w/dip switches. > > > > Sounds like your flash got corrupted. > > > > Or send it back to 3Com and they'll do probably the same thing. > > > > SMT > > > > > -----Original Message----- > > > From: Dataheart [mailto:lists@dataheart.net] > > > Sent: Thursday, September 30, 1999 10:49 AM > > > To: usr-tc(a)lists.xmission.com > > > Subject: (usr-tc) Netserver problem > > > > > > > > > Well I'm just full of problems arent I :-D > > > > > > I have a Netserver card that once powered up the rn/fl led > > > flashes green on > > > and off 13 times, then flashes quickly for a few seconds, > > > then goes solid green > > > for a while, then repeast the process. > > > Anyone know whats going on? > > > > > > Thanks, > > > Aaron > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old > messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) HDM Uptime
by Jim Johnson 04 Oct '99

04 Oct '99

Due to the hanging DSP bug in the HDMs which takes out two ports (arghhh..), we are monitoring our failure statistics via SNMP looking for these problems. We automatically capture and email the call failure statistics every morning for all HDMs. This morning I noticed that all of the statistics on one HDM had been zeroed out during thr prior day. This concerns me as I would imagine the card must have rebooted itself in order to reset these counters. (True?) I am sure there must an uptime stat for each HDM which I can get using TCM, but I did not see it when I looked around some. Can someone tell me how to get the HDM uptime so I can know exactly when this card reset itself. Also, does this happen to other folks periodically or is this card getting ready to go bad? FInally, we had our telco change our hunting from first available B channel to a circular hunt and this seems to have dramtically reduced the number of occurrences of the hung DSP problem. -Jim - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) OID for Hiper
by Max Gargani 01 Oct '99

01 Oct '99

Hi all, I'm new on this list. I'm looking for OID to check user connected to my USR-TC Hiper with MRTG. I found OID for normal TC and for Cisco AS5x00 but not for TC Hiper. Any help? Thanx in advance, Max - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Going nowhere fast...
by Jerry Wright 01 Oct '99

01 Oct '99

We had a USR TC box with 48 modems and 2 T1s. It worked... Well, we got our third T1 and a used TC box. Now, about a third of our customers log on, get authenticated, and sit there (ping and traceroute work, web browsing doesn't). Or else, they get an error 750 or 765 or other type error. Could our new T1 NIC card be bad? It passes the various tests? Help!!! Other info, the T1 performance test tells me 3865 bipolar whatever errors in the last 24 hours. Bad card??? US West says the line tests out good. Jerry Wright Internet Access of Moses Lake - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 7

(usr-tc) Pipe 75 + Static IP + NAT
by Marius Strom 01 Oct '99

01 Oct '99

I'm trying to hook up a Pipe 75 with a Static IP and NAT enabled to a HiPerARC chassis.. When I disable the NAT on the Pipe, it connects, when I enable it, it won't connect.. The pipe has been dialing into a Livingston PM2e up until now, and when I modify the remote address and the phone number to have it dial to our TC equipment, it won't do it. I've gone and disabled things such as STAC and all other compressions.. I did set the Pipe to MP with BACP=Yes. Please let me know if you guys have had any success, and if you've got success, let me know how I can have it too *chuckle* Thanks in advance! -- Marius Strom <marius(a)alpha1.net> Professional Geek/Unix System Administrator Alpha1 Internet <http://www.alpha1.net> http://www.marius.org/marius.pgp 0x5645C228 In theory, there is no difference between theory and practice... ...In practice, there is a big difference. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

Re: (usr-tc) TCHub and routing
by Barry Yost 01 Oct '99

01 Oct '99

I had a headache trying to set up the route as you have. The easiest solution is to use host-based routing. add a line Framed-Netmask=255.255.255.248, to the RADIUS definition of the user. Then the route should be advertized properly. You should also follow the advise of the other replies to the list enabling Ripv2 on the ARC if you haven't already done so, and make sure that your core router is listening for that class C as well. In cisco: router rip version 2 network 208.150.95.240 ^Z (In my site's config, I also added passive-interface ser1/0 etc. for all of the non-POP interfaces so that rip updates won't be flowing around the network wasting traffic, nor accidentally getting picked up by a neighboring router that you don't want to pass routes to) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) UPDATE TCHub and routing UDDATE
by Robb Bryn 01 Oct '99

01 Oct '99

I think I may have an underlying problem with the IP class I'm trying to use for the route. Let me see if I have my logic right.... I have a primary Class C that I use for this particular chassis (208.133.28.0/24) all 208.133.28.0 addresses work perfectly (routed subnets as well) the IP pool I am using for dialups is 208.133.28.55/25 with 48 ips. I am using Radius to specify reserved IP's. I just configured a standard (non sub netted) dialup from the new 208.150.95.0/24 class C (testing a theory on my problem with the subnet route I'm trying to add). The single dialup is only able to access the arc's ip address of 208.133.28.51, all other addresses won't ping out. My Cisco's Ethernet 0 is configured with 2 ip's 208.133.28.1 & 208.150.95.1 RIP is enabled and working properly (I have other routers on the network that are using RIP successfully). I can configure a Network workstation with an ip from the 208.150.95.0 network and it routes successfully through the Cisco. So, I'm not sure now if it's a RIP issue or a Idiot config error. Is there anything special I need to do to enable another Class C on the chassis? I have enabled IP forwarding, I have enabled RIP routing. When I do a "list ip routes" it shows up as : 208.150.95.15/H LOCAL 208.150.95.15 1 slot:14/mod:17 One last question.... where are the archives for this mailing list (so I can continue digging)? I have watched and learned from everyone on this list (I greatly appreciate everyone's help). Thanks Robb Bryn > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jim Johnson > Sent: Friday, October 01, 1999 9:05 AM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) TCHub and routing > > > > set ip network ip2 routing_protocol ripv2 > > Robb Bryn wrote: > > > > I've disabled IP SOURCE_ADDRESS_FILTER allready (no luck). > How do I turn on > > RIPv2 on the arc? > > > > Thanks > > Robb Bryn > > > > > -----Original Message----- > > > From: owner-usr-tc(a)lists.xmission.com > > > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of > > > Stainforth, Matthew > > > Sent: Friday, October 01, 1999 8:25 AM > > > To: 'usr-tc(a)lists.xmission.com' > > > Subject: RE: (usr-tc) TCHub and routing > > > > > > > > > > > > I believe you'll also want to build static routes or have the > > > ARC advertise > > > the subnet using OSPF or RIPv2 if you want that subnet to be > > > reachable from > > > anywhere other than the ARC itself. > > > > > > Matthew > > > > > > On Friday, October 01, 1999 9:00 AM, Jim Johnson > > > [SMTP:jim@perigee.net] > > > wrote: > > > > > > > > > > > > Make sure you: > > > > > > > > DISABLE IP SOURCE_ADDRESS_FILTER > > > > > > > > if you want the routing to actually **work** as opposed to just > > > > **showing up** in the routing table correctly. > > > > > > > > -Jim > > > > > > > > > Robb Bryn wrote: > > > > > > > > > > I'm configuring my first routed subnet on the TCHub and > > > can't quite > > > > > figure out what I'm doing wrong. > > > > > > > > > > I have a Ascend P50 dialing in via ISDN with radius > attributes of: > > > > > Framed-Address = 208.150.95.241 > > > > > Framed-Route = 208.150.95.240/29 208.150.95.241 1 > > > > > > > > > > After connecting, I can ping the ether address of the TCHub > > > > > (208.133.28.51) from any of the subnet hosts can't ping > > > anything past > > > > > it. I can't ping any host on the subnet from the TCHub. > > > Below is > > > > > the output from the show ip network command. > > > > > > > > > > > > > > > HiPer>> show ip network test-ip-I4586 > > > > > > > > > > SHOW IP NETWORK test-ip-I4586 SETTINGS: > > > > > Interface: slot:14/mod:2 > > > > > Network Address: 208.150.95.241/H > > > > > Frame Type: PPP > > > > > Status: ENABLED > > > > > Reconfigure Needed: FALSE > > > > > Mask: 255.255.255.255 > > > > > Station: 0.0.0.0 > > > > > Broadcast Algorithm: IETF > > > > > Max Reassembly Size: 3464 > > > > > IP Routing Protocol: NONE > > > > > IP Routing Metric: 1 > > > > > RIP Interface Export Metric: 0 > > > > > IP RIP Routing Policies: > > > > > IP RIP Authentication Key: > > > > > HiPer>> > > > > > > > > > > > > > > > > > > > > I'm pulling my hair out trying to figure out what I've > > > done wrong. A > > > > > kick in the right direction would be greatly appreciated. > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > Robb Bryn > > > > > > > > - > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0