While cleaning out the garage today I came across some components that might be of use to ATMs for either drives or grinding machines, or whatever your imagination can dream-up: * Right-angle drive. Case measures 3-1/16" X 2-13/16", with 3/8" shafts 9/16" long with a flat area for a setscrew. Geared such that rotation direction is preserved (not reversed) as you look at each shaft end-on. Fairly robust. Many mounting holes, at least 4 mounting configurations possible. I have about a dozen, I'll give one each away free to educators, otherwise I'd like 2 bucks each. Unused. * Torque-limiting clutch. Not sure what the limiting force is, but a guess would be about 15-20 ft.-lbs. Non-adjustable, for 3/8" shaft on both input and output end, straight configuration. 2-1/2" long overall, 1-1/2" diameter. Set-screws for shafts. BN. Again, I'll give away one each to educators, otherwise you can slip me 2 bucks each. I'll try and get photos soon, but this is a working Pioneer Day weekend for me. Contact me off-list if interested. Thanks! __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com