Thanks, Kurt! Best wishes, Joe --- On Sat, 6/26/10, Canopus56 <canopus56@yahoo.com> wrote: From: Canopus56 <canopus56@yahoo.com> Subject: [Utah-astronomy] Building your own light box To: "Utah Astronomy List Serv" <utah-astronomy@mailman.xmission.com> Date: Saturday, June 26, 2010, 6:58 PM Joe wrote:

I am looking at plans to build my own light box. Best wishes, Joe

Joe,  Regional Supply at 3571 South 300 West, Salt Lake City, Utah, has the 3/4 inch white milk plastic sheets and will cut them to your requested size. Be sure to check the odd sheet bin.  They may have a partial sheet at half-off from which a 10" square can be cut. Other than that, building your own light box using the tap light method is a project that requires only: 1) Utility knife and scissors 2) Square, long ruler and compass 3) Small drill    4) tap light, a couple mini-bungie cords, four nylon screws with eyelets, and white duct tape (Ace Hardware) 5) two sheets of 1/2 white foam board 36x24 (Ruels). I built mine as a winter construction project.  - Kurt - Kurt       _______________________________________________ Utah-Astronomy mailing list Utah-Astronomy@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/utah-astronomy Visit the Photo Gallery: http://www.slas.us/gallery2/main.php Visit the Wiki: http://www.utahastronomy.com