Here's the connector-component layout for the direct projection lunar images taken on the Ealing taken this weekend. None of these are parafocal. The ep off of the flip mirrors is used for targeting. Focus can then be done on the laptop screen. Direct projection basic - photo http://gallery.utahastronomy.com/main.php?g2_itemId=11309 Direct projection basic schematic http://gallery.utahastronomy.com/main.php?g2_itemId=11311 Direct projection with filter wheel photo http://gallery.utahastronomy.com/main.php?g2_itemId=11313 Direct projection with filter wheel schematic http://gallery.utahastronomy.com/main.php?g2_itemId=11315 Allen and thumb screw release points for default right angle http://gallery.utahastronomy.com/main.php?g2_itemId=11317 For double star imaging, a negative projection setup will probably work by adding a 2x shorty barlow to the end of the component train, just inside focus of the camera in each layout. I haven't tested the negative projection setup. Enjoy - Kurt