Sept. QST source for RT upgrade help
I'm hoping that Gary Liptrot or one of the other amateur radio operators on the list might be able to help me with this - I'm trying to determine the best way to upgrade my radio telescope so that it is fully-steerable. It's my understanding that the September issue of QST magazine has a good review of available rotators. But, I've been unable to find a way to purchase the magazine without joining ARRL. I've tried the Logan Borders, Hastings, and Wal-Mart as well as amazon.com with no joy. So, if you could let me know where I could purchase a copy, it would be greatly appreciated. Clear skies, Dale.
Hi Dale. I'm afraid I can't help you at all with your problem, but your post reminded me of something I haven't really thought about for some time. One of my earliest astronomy projects was the construction of a radio telescope, 'way back in high school. Since I'm not ashamed of my age, I'll divulge the year: 1971. (Everyone's supposed to say, "Why Kim, I had no idea you were that old. You look SO young!) Unfortunately, I became distracted by other things and abandoned the project before it got very far. Anyway, at first I had planned to purchase a surplus military parabolic dish to use for an antenna, but it was too costly. I finally determined to build a Yagi array, but not before I realized that a cylindrical parabaloid would have also been very easy to build and with very little skill or exotic materials required. I don't recall why I settled on the Yagi array, I have simply forgotten too much of the physics involved. And that finally brings me to a question I have for you and others: What would be the advantages/disadvantages of one type of antenna over another? I would still rule out the conventional parabolic dish because of the relative complexity of its construction for a basement tinkerer like me. However, the cylindrical parabaloid is still quite easy to construct with some plywood, a simple plot of a parabola on a piece of paper for a pattern, and some hardware fabric or insect screen to cover the surface. Can anyone enlighten me? Remember, you need to explain in terms my few remaining viable brain cells can comprehend. Thanks all. ----- Original Message ----- From: "Dale Hooper" <Dale.Hooper@sdl.usu.edu> To: "Utah Astronomy" <utah-astronomy@mailman.xmission.com> Sent: Thursday, September 08, 2005 9:19 AM Subject: [Utah-astronomy] Sept. QST source for RT upgrade help | I'm hoping that Gary Liptrot or one of the other amateur radio operators | on the list might be able to help me with this - | | | | I'm trying to determine the best way to upgrade my radio telescope so | that it is fully-steerable. | | | | It's my understanding that the September issue of QST magazine has a | good review of available rotators. But, I've been unable to find a way | to purchase the magazine without joining ARRL. I've tried the Logan | Borders, Hastings, and Wal-Mart as well as amazon.com with no joy. So, | if you could let me know where I could purchase a copy, it would be | greatly appreciated. | | | | Clear skies, | | Dale. | | | | _______________________________________________ | Utah-Astronomy mailing list | Utah-Astronomy@mailman.xmission.com | http://mailman.xmission.com/cgi-bin/mailman/listinfo/utah-astronomy | Visit the Photo Gallery: http://www.utahastronomy.com | | ______________________________________________________________________ | This e-mail has been scanned by Cut.Net Managed Email Content Service, using Skeptic(tm) technology powered by MessageLabs. For more information on Cut.Nets Content Service, visit http://www.cut.net | ______________________________________________________________________ | |
Hi Dale, I have the September QST sitting right here. The article is a product review called "A Look at a New Generation of Antenna Rotators." The author concentrates on MEDIUM duty rotators some of which I know have been around for a while. They are single axis only but some can be computer controlled quite nicely. They review the following rotators: AlfaSpid C.A.T.S. RD-1800 Hy-Gain Ham-V Prosistel PST-641D Yaesu G-800DXA (I have the G-1000SDX on a 46 foot tower) I know that the special satellite tracking rotators (not mentioned in the article) are two axis and computer controlled. I don't know what the wind-loading specs are compared to the others in the article. Look up Yaesu's satellite rotators to find out their specs. They would be the best if they will handle the weight. Even if you just get one axis I imagine that you would have to build a small beefy mount with a couple of thrust bearings around the pipe that runs to your dish. Not hard to do. What do those 10 foot dishes weigh? I know with everyone turning to small satellite dishes the large black mesh dishes that were made for the analog C or the Ku bands are a dime a dozen. The wind loading for the six rotators in the article run from 10 to 25 square feet. I have a huge yagi tri-bander that only runs 11 square feet of wind loading. It's boom is 24 feet long and four inches in diameter and the longest element is 28 feet. I did break the shear-pin in a 90mph canyon wind but as long as only one axis of rotation is needed then I'm sure that these rotators would work. I've seen the printouts from Dale's RT work and it's amazing. You mention noise rejection but spousal rejection is much more serious... B) I can get you the QST article if you need it Dale, you've got my home email. 73 de n7zi Gary "Why buy something for ten bucks when you can make it for a hundred." JR ----- Original Message ----- From: "Dale Hooper" <Dale.Hooper@sdl.usu.edu> To: "Utah Astronomy" <utah-astronomy@mailman.xmission.com> Sent: Thursday, September 08, 2005 9:19 AM Subject: [Utah-astronomy] Sept. QST source for RT upgrade help I'm hoping that Gary Liptrot or one of the other amateur radio operators on the list might be able to help me with this - I'm trying to determine the best way to upgrade my radio telescope so that it is fully-steerable. It's my understanding that the September issue of QST magazine has a good review of available rotators. But, I've been unable to find a way to purchase the magazine without joining ARRL. I've tried the Logan Borders, Hastings, and Wal-Mart as well as amazon.com with no joy. So, if you could let me know where I could purchase a copy, it would be greatly appreciated. Clear skies, Dale. _______________________________________________ Utah-Astronomy mailing list Utah-Astronomy@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/utah-astronomy Visit the Photo Gallery: http://www.utahastronomy.com
participants (3)
-
Dale Hooper -
Gary Liptrot -
Kim Hyatt