Hello all. Although I'm getting most of the kinks worked out of my USR gear, I'm now working on the second chassis, which has a dual PRI card installed. The other chassis in this POP had a dual T1 card installed, and seems to be working just fine. However, I can't seem to see how/where to configure the dual PRI to function in channelized T1 mode. Unfortunately, I don't have access to PRI's with this telco. Reading the archives, I surmise this is possible to do, but may require a minimum firmware level. Is this correct, and if so, what version do I need? I believe I've got 3.0.2 in place now. Thanks again! Brad - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Also sprach Brad Gass
Although I'm getting most of the kinks worked out of my USR gear, I'm now working on the second chassis, which has a dual PRI card installed.
The other chassis in this POP had a dual T1 card installed, and seems to be working just fine. However, I can't seem to see how/where to configure the dual PRI to function in channelized T1 mode. Unfortunately, I don't have access to PRI's with this telco.
So, by that I assume that you want to use it as a pure channelized T1, not as a PRI...
Reading the archives, I surmise this is possible to do, but may require a minimum firmware level.
Actually, it requires a different firmware on the dual-pri card, not just a certain level. Force a flash of a channelized T1 version of the firmware to the card and you'll be all set. The dual-pri code won't do plain channelized T1 at all, the card is perfectly capable of it, but the firmware needs to be swapped out with dual-t1 code to do it. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Re-flash it with the regular T1 code on your other card, then it will work in channelized mode. By default, the PRI code has no support for channelized T1, so you have to give it new code. If you ever need to go back, you'll have to reflash it with the dp (dual PRI) code. On Sun, Jul 22, 2001 at 11:10:59PM -0500, Brad Gass wrote:
Hello all.
Although I'm getting most of the kinks worked out of my USR gear, I'm now working on the second chassis, which has a dual PRI card installed.
The other chassis in this POP had a dual T1 card installed, and seems to be working just fine. However, I can't seem to see how/where to configure the dual PRI to function in channelized T1 mode. Unfortunately, I don't have access to PRI's with this telco.
Reading the archives, I surmise this is possible to do, but may require a minimum firmware level.
Is this correct, and if so, what version do I need? I believe I've got 3.0.2 in place now.
Thanks again!
Brad
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Brad Gass -
Jaye Mathisen -
Jeff Mcadams