I have working e1/r2 ( code 2.0.50 ) , and I want replace it with PRI. What do I need to change in HiperDSP to terminate PRI?? Thanks pankaj ----- Original Message ----- From: "Shinman, Gilad" <gilad.shinman@intel.com> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, August 20, 2002 6:14 PM Subject: RE: [USR-TC] Question on Hiper DSP E1/T1 Card

You'll need R2 firmware (HiPer DSP E1/R2 v3.5.12 is in parallel to your code) no hardware changes needed

Gilad Shinman Network Engineer Intel Israel gilad.shinman@intel.com

-----Original Message----- From: Patrick Ndegwa [mailto:pndegwa@ke.uu.net] Sent: Tuesday, August 20, 2002 10:57 AM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Question on Hiper DSP E1/T1 Card

Hi there,

I have been running Hiper DSP E1/T1 cards (code ver 3.5.13) for sometime now on ISDN E1 PRI lines. However, my telco provider wants to provision some new R2 E1 lines. I wanted to know if I need to make any hardware or firmware changes on the Hiper DSP cards to support the R2 lines.

Cheers,

Patrick Ndegwa

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc