NMC keeps rebooting
one day i found that NMC was undable to respond to snmp queries (not ip problem - ping was ok). some problems had console too - very slow performance. after that i tried to configure from defaults (by dip #5) - console got ok, but same problem with snmp. i reflashed NMC with software version 5.4.1 now it is rebooting each time it loads. how to get it to work? can chassis work without nmc? ( Dual E1/R2, Quads, NETServer card - old chassis).
I have a access server with 14x Quads(v.34) İt is crashes every day. What causes the problem Might it be a misconfigure problem? Regards Murat Version info is; U.S. Robotics Total Control (tm) NETServer Card V.34 V3.3.3 Build date: Nov 27 1996 Build time: 17:06:59 Network Interface Card: Ethernet (24) Packet Bus Circuit : Standard Licensed for 60 ports.
Yes...chassis can work without the nmc. Todd ----- Original Message ----- From: "Alexander Jaliashvili" <alex@wanex.ge> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, January 14, 2003 7:41 AM Subject: [USR-TC] NMC keeps rebooting
one day i found that NMC was undable to respond to snmp queries (not ip problem - ping was ok). some problems had console too - very slow performance. after that i tried to configure from defaults (by dip #5) - console got ok, but same problem with snmp.
i reflashed NMC with software version 5.4.1 now it is rebooting each time it loads. how to get it to work?
can chassis work without nmc? ( Dual E1/R2, Quads, NETServer card - old chassis).
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (3)
-
Alexander Jaliashvili -
Murat Küçük -
Todd Bertolozzi