I did it last May. I got these tips from chip@wirefire.com The only thing is that these are static assignments. Not real-time balancing. My PRI channels go round-robin so that evens the load on arc's enough to suit me. ------------------------------------------------ use this as a reference The first step is to turn off chassis awareness and re-boot: disable nmc chassis_awareness save all reboot The next step is to tell the HARC what slots it owns and what the cards are: set chassis slot 2-16 owner yes set chassis slot 2-16 card_type hdm_24 set chassis slot 2-16 ports 23 save all

-----Original Message----- From: Jamie Orzechowski [SMTP:mhz@ripnet.com] Sent: Monday, August 16, 1999 5:07 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) 2 ARC's - one chassis

Could someone please give me a config to setup load balancing between 2 arc's

I will have 14 DSP's in one chassis with 2 ARC's controlling them.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.