(usr-tc) Transition from Netserver to ARC
I have been using tons of Netserver PRI's in the past and just recently got my first Arc. I know there is no future in the Netserver so I will continue to get more Arcs, but I have a few issues. Whats the easiest way to get a Arc up and running? I have a chassis with seven DSP's and just want to do basic dialin access. Assign DNS numbers, assign an address from a pool and authenticate against a RADIUS server. Thanks. Timothy C. Bohen CMSInter.Net / Crystal MicroSystems ============================ web : www.cmsinter.net email : Tim@CMSInter.Net phone : 517.235.5100 x22 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
goes a little something like this .... (version 5.1.99-8 mostly) ... please change the servers! === CONSOLE == add ip net ip address 208.148.192.36/255.255.255.128 inter eth:1 enable y add ip defAULTROUTE gaTEWAY 208.148.192.1 metric 1 add user "administrator" password "XXXXXX" type login,manage enable y disablE nmC chASSIS_AWARENESS set chassis slot 1-14 o y card_type hdm_24 ports 24 console n type static enable secURITY_OPTION rEMOTE_USER_ADMINISTRATION tELNET add snMP community public acCESS ro adDRESS 0.0.0.0 set modem_group all message "" set modem_group all prompt "\nlogin: " disaBLE auTHENTICATION lOCAL set authENTICATION vSA enable set accounTING vsA enable set accountING loG_UNAUTHENTICATED_CALLS enABLED enable ip security_option disallow_source_route_options set commAND logiN_REQUIRED yes set radiUS authENTICATION_ALGORITHM falL_THROUGH add dns server 208.137.128.x preference 1 add dns server 208.137.128.y preference 2 set dns domain_name netdoor.com set ntp primary_server ntp.netdoor.com enable ntp set ppp ccP_MODEMTYPE_ACCEPT all set ppp reCEIVE_AUTHENTICATION pap set ppp DNS_USAGE system set ppp authentication_preference pap enable ppp offloading add ip pool ippool INITIAL_POOL_ADDRESS 208.148.211.1 size 252 route aggregate state public set authentication primary_server 208.137.128.x set authentication secondary_server 208.137.128.x set accounting primary_server 208.137.128.x set accounting secondary_server 208.148.196.x set authentication primary_secret blahblah set authentication secondary_secret blahblah set accounting primary_secret blahblah set accounting secondary_secret blahblah add sysLOG 208.137.128.x aLLOW_ALL_AUTH_LEVELS n faCILITY log_auth logleVEL crITICAL ======================== a Cisco would then route the ARC (208.148.192.36) the network 208.148.211.0/255.255.255.0 in our env GOOD LUCK! Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Timothy C. Bohen" <Tim@CMSInter.Net> To: <usr-tc@lists.xmission.com> Sent: Monday, March 12, 2001 9:11 PM Subject: (usr-tc) Transition from Netserver to ARC
I have been using tons of Netserver PRI's in the past and just recently got my first Arc.
I know there is no future in the Netserver so I will continue to get more Arcs, but I have a few issues.
Whats the easiest way to get a Arc up and running? I have a chassis with seven DSP's and just want to do basic dialin access. Assign DNS numbers, assign an address from a pool and authenticate against a RADIUS server.
Thanks.
Timothy C. Bohen CMSInter.Net / Crystal MicroSystems ============================ web : www.cmsinter.net email : Tim@CMSInter.Net phone : 517.235.5100 x22
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thanks everyone who answered this for me, all the replys were very helpful. Timothy C. Bohen CMSInter.Net / Crystal MicroSystems =================================== web : www.cmsinter.net email : Tim@CMSInter.Net phone : 517.235.5100 x22 -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Timothy C. Bohen Sent: Monday, March 12, 2001 10:12 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) Transition from Netserver to ARC I have been using tons of Netserver PRI's in the past and just recently got my first Arc. I know there is no future in the Netserver so I will continue to get more Arcs, but I have a few issues. Whats the easiest way to get a Arc up and running? I have a chassis with seven DSP's and just want to do basic dialin access. Assign DNS numbers, assign an address from a pool and authenticate against a RADIUS server. Thanks. Timothy C. Bohen CMSInter.Net / Crystal MicroSystems ============================ web : www.cmsinter.net email : Tim@CMSInter.Net phone : 517.235.5100 x22 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
Marshall Morgan -
Timothy C. Bohen