If anyone has mbone working, a sample config would be appreciated. The one in the manual doesn't seem to work, and I know everything else is working (works OK with my dial-in clients thru our Ascend Maxes, just not the 3com chassis). Thanks, -- Aaron Nabil - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

What code version did you do this on? I have tested with 4.1.59-6. and 4.2.x and not found any problems after a reboot... -M |-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Stephen Amadei |Sent: Monday, August 16, 1999 11:04 PM |To: usr-tc@lists.xmission.com |Subject: (usr-tc) Telnet exploit round 2... | | | |O.K. I did the 'enable telnet cli' stuff with a nice |brief 'add telnet cli xxx.xxx.xxx.xxx' list. I did a 'save all'. | |Everything worked correctly until I rebooted my TCs. Now they won't |accept telnet access from anywhere. | |Anyone else notice this? I haven't been able to log into the local |console yet to check the damage, but at least the equipment is working |(well, except the telnet access). | to the same address. Do not use quotes in your message. | - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.