(usr-tc) HiperArc 4.2.32 problem with large blocks
Hi, Having had MTU problems with HARC software 4.1.11, we tried upgrading to 4.1.32 today. It soon became apparent that large blocks were no longer being handled at all! We had been looking forward to an improvement. Because of service requirements, we didn't get much time to debug this, but the max block size handled OK seemed to be about 580. Anybody seen a similar problem or have a lucky-rabbit's foot please? Colin Wantling - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
On Wed, 17 Nov 1999, Colin J Wantling wrote:
Hi, Having had MTU problems with HARC software 4.1.11, we tried upgrading to 4.1.32 today. It soon became apparent that large blocks were no longer being handled at all! We had been looking forward to an improvement.
What keeps you from going to 4.1.59-6? It probably is the best 4.1.x version to be running.
Because of service requirements, we didn't get much time to debug this, but the max block size handled OK seemed to be about 580.
Anybody seen a similar problem or have a lucky-rabbit's foot please?
Colin Wantling
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thus spake Brian
On Wed, 17 Nov 1999, Colin J Wantling wrote:
Having had MTU problems with HARC software 4.1.11, we tried upgrading to 4.1.32 today. It soon became apparent that large blocks were no longer being handled at all! We had been looking forward to an improvement.
What keeps you from going to 4.1.59-6? It probably is the best 4.1.x version to be running.
I think he was actually referring to 4.2.32-1, not 4.1.32-1, which, to my knowledge doesn't exist...or at least isn't released. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I have USR Radius 5.5.3 authenticating my Hyper chassis. Quite frequently of late all 3 on my NT authentication servers will crash at the same time with the following error: The instruction at "0x77f6cde6" referenced memory at "0x00000010". The memory could not be "written". - Click OK The event log shows the following 3 entries: Error in security socket create 10048 [C:\5_5_3\project\5_5_3\RADNT\src\Ccomms.cpp(401)] No data for: SYSTEM.NW_SERVER [C:\5_5_3\project\5_5_3\RADNT\src\RADSERV.CPP(649)] No data for: SYSTEM.TACACS_SERVER [C:\5_5_3\project\5_5_3\RADNT\src\RADSERV.CPP(649)] Any Ideas? Can somebody purposely send a string to be authenticated that Radius can't handle? Would 3Com's new Radius solve the problem? Does anybody recomend a third party Radius? Thank You for your time, Jim Faulkner GWE.NET - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (4)
-
Brian -
Colin J Wantling -
Jeff Mcadams -
jlf＠montrose-colo.com