Mohsen wrote:

Dear All I need to set public IP address on hiper arc interface and private IP address pool , but when configured it the user connect to system couldn't browse internet. for example the setting is as below :

Hiper ARC interface IP address : 212.200.200.10 Default Gateway : 212.200.200.1

IP Pool : 192.168.100.1 size 60

the user connect to the system and get ip address from pool but they can't ping for example 192.9.9.3.

Please guide me if this is possible and what should I do ?

Wayne wrote :

Are the users able to ping the HiperARC's IP address?

How about the default gateway?

What kind of device is acting as the default gateway?

In order to use private IP addresses in that way you will need to NAT those addresses behind a public IP address. I've never experimented with NAT on the HiperARC. In fact, I'm not even sure if it supports it. However, that is not to say that you can't perform the NAT on another device in front of the HiperARC - e.g. a router or PC.

Thank Wayne for your response. the user can ping the Hiper ARC interface , but he can'y ping the default gateway. The Gateway is a ADSL Modem. Could you guide me on NAT feature of Total Control ? Good Luck __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com