RE: [USR-TC] Channelized T1 Question
They work with both CT1 or PRI - nothing required -----Original Message----- From: GiGoNET Support [mailto:tom@gigonet.com] Sent: Saturday, January 29, 2005 5:05 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Channelized T1 Question Is it possible to flash the DSP T1/E1 card to work with CT1 verse PRI? Cheers, -Tom _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Hmm.. I moved a CT1 Span from and older(red) chassis Dual T1 card to the DSP T1/E1 of the newer (blue) chassis and it's all alarms. That's why I posted the question. Thanks for the info. I'll plow through TCM and see if I can figure it out. -Tom
They work with both CT1 or PRI - nothing required
Is it possible to flash the DSP T1/E1 card to work with CT1 verse PRI?
Hey Joel, I've just about got this working.. I think I've missed a piece. There are no alarms. I call the calls come in... but a modem on the dsp doesn't seem to get mapped to the call. Slot1 DSP/span1> display atstat Tslot Status Modem Status Call ID Action Span Connect Srvc State Queued Status 01 Idle N/A IS 0x00000000 NONE Ok 02 Idle N/A IS 0x00000000 NONE Ok 03 Dial In 003 IS 0x00020002 NONE Ok 04 Idle N/A IS 0x00000000 NONE Ok 05 Idle N/A IS 0x00000000 NONE Ok 06 Idle N/A IS 0x00000000 NONE Ok 07 Idle N/A IS 0x00000000 NONE Ok 08 Idle N/A IS 0x00000000 NONE Ok Slot1 DSP/span1> display atconfig Tslot Block Assigned Service ID Description Call Type Chan State 01 NONE 01 IS Cheers, -Tom 02 NONE 02 IS On 29 Jan 2005 at 17:06, Joel - Fox Computers wrote:
They work with both CT1 or PRI - nothing required
-----Original Message----- From: GiGoNET Support [mailto:tom@gigonet.com] Sent: Saturday, January 29, 2005 5:05 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Channelized T1 Question
Is it possible to flash the DSP T1/E1 card to work with CT1 verse PRI?
Cheers, -Tom
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
GiGoNET Support wrote:
Hey Joel,
I've just about got this working.. I think I've missed a piece. There are no alarms. I call the calls come in... but a modem on the dsp doesn't seem to get mapped to the call.
*Slot1 DSP/span1> display atstat*
Tslot Status Modem Status Call ID Action Span Connect Srvc State Queued Status 01 Idle N/A IS 0x00000000 NONE Ok 02 Idle N/A IS 0x00000000 NONE Ok 03 Dial In 003 IS 0x00020002 NONE Ok 04 Idle N/A IS 0x00000000 NONE Ok 05 Idle N/A IS 0x00000000 NONE Ok 06 Idle N/A IS 0x00000000 NONE Ok 07 Idle N/A IS 0x00000000 NONE Ok 08 Idle N/A IS 0x00000000 NONE Ok
*Slot1 DSP/span1> display atconfig*
Tslot Block Assigned Service ID Description Call Type Chan State 01 NONE 01 IS
Cheers, -Tom
02 NONE 02 IS
When you do a list chassis does the arc show that it owns the slot in question and display the correct modem type? -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-691-3301 800-299-6962
Looks okay... TC2-Arc16>> list chassis Slot Owner Description Ports Type Console 1 YES 24 Channel High Density Modem 24 STATIC NO 2 YES 24 Channel High Density Modem 24 STATIC NO 3 YES 24 Channel High Density Modem 24 STATIC NO 4 YES 24 Channel High Density Modem 24 STATIC NO 5 YES 24 Channel High Density Modem 24 STATIC NO 6 YES 24 Channel High Density Modem 24 STATIC NO 7 YES 24 Channel High Density Modem 24 STATIC NO 8 YES 24 Channel High Density Modem 24 STATIC NO 9 NO 24 Channel High Density Modem 24 STATIC NO 10 NO 24 Channel High Density Modem 24 STATIC NO 11 NO 24 Channel High Density Modem 24 STATIC NO 12 NO 24 Channel High Density Modem 24 STATIC NO 13 NO 24 Channel High Density Modem 24 STATIC NO 14 NO 24 Channel High Density Modem 24 STATIC NO 15 NO 24 Channel High Density Modem 24 STATIC NO 16 NO 24 Channel High Density Modem 24 STATIC NO
On 31 Jan 2005 at 8:55, Lewis Bergman wrote: When you do a list chassis does the arc show that it owns the slot in question and display the correct modem type?
GiGoNET Support wrote:
Hey Joel,
I've just about got this working.. I think I've missed a piece. There are no alarms. I call the calls come in... but a modem on the dsp doesn't seem to get mapped to the call.
*Slot1 DSP/span1> display atstat*
Tslot Status Modem Status Call ID Action Span Connect Srvc State Queued Status 01 Idle N/A IS 0x00000000 NONE Ok 02 Idle N/A IS 0x00000000 NONE Ok 03 Dial In 003 IS 0x00020002 NONE Ok 04 Idle N/A IS 0x00000000 NONE Ok 05 Idle N/A IS 0x00000000 NONE Ok 06 Idle N/A IS 0x00000000 NONE Ok 07 Idle N/A IS 0x00000000 NONE Ok 08 Idle N/A IS 0x00000000 NONE Ok
*Slot1 DSP/span1> display atconfig*
Tslot Block Assigned Service ID Description Call Type Chan State 01 NONE 01 IS 02 NONE 02 IS
Cheers, -Tom
participants (3)
-
GiGoNET Support -
Joel - Fox Computers -
Lewis Bergman