Well after posting my issue with the HIPER DSP cards here is what I have found to work. I restored the Hiper DSP card to factory default settings per Commworks Knowledge base. I then copy my settings over from a working card and it has been up for 5 days now with no troubles. I have never had to restore a card to Factory Settings so does anyone know why I would have to do it now? Anyway it works and thanks to those who gave me some ideas to try. Thanks, Kris McElroy kmcelroy@duracom.net Internet Systems Engineer Duracom, INC. www.duracom.net
The V.92 ISP list at www.Modemsite.com/56k/v92isp.asp has been revised - new MoH time, and other fields added. If you support V.92 and want to be listed - or to have your listing updated, use the form at http://modemsite.com/56k/v92iform.asp There is no charge to be listed. Aloha, Richard Gamberg, Publisher www.modemsite.com
Dude ... your filter does not seem to work. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Richard Gamberg" <vrichard@hawaii.rr.com> To: <usr-tc@mailman.xmission.com> Sent: Friday, November 01, 2002 2:25 PM Subject: [USR-TC] V.92 ISPs
The V.92 ISP list at www.Modemsite.com/56k/v92isp.asp has been revised - new MoH time, and other fields added.
If you support V.92 and want to be listed - or to have your listing updated, use the form at http://modemsite.com/56k/v92iform.asp There is no charge to be listed.
Aloha, Richard Gamberg, Publisher www.modemsite.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Can someone tell me if there is a way to disconnect hung telnent sessions on a HiperARC? Thanks, Dan
I'm wondering if anyone has successfully deployed v.92 and what code revisions they are using? We've got a couple HiperArc/DSP shelves and some Multispan shelves we're looking to upgrade if it works. Our last attempt was a nightmare. Todd DeWitt Oxford Networks www.oxfordnetworks.com
On Wednesday 13 November 2002 06:38 am, Todd DeWitt wrote:
I'm wondering if anyone has successfully deployed v.92 and what code revisions they are using? We've got a couple HiperArc/DSP shelves and some Multispan shelves we're looking to upgrade if it works. Our last attempt was a nightmare. I am using it with DSP code 3.5.105, The v.92 code doesn't seem to be as much of a problem as the client software. The best luck I have had so far is with the Lucent/Agere winmodem and the software from modemsite.com.
The MOH stuff still seems a bit dodgy though. I can test the first time and it works, after that the software never seems to properly let you accept a call. It acts as though it does but no audio passes. I haven't played with it enough yet to really determine what is going wrong though. -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115
participants (6)
-
Dan Houtz -
Kris McElroy -
Lewis Bergman -
Marshall Morgan -
Richard Gamberg -
Todd DeWitt