Could you tell me what is the version that corrected this problem or was corrected with a patch? Thanks Esteban ----- Original Message ----- From: V To: usr-tc@mailman.xmission.com Sent: Tuesday, August 20, 2002 9:00 PM Subject: Re: [USR-TC] Asign IP-Pool with L2TP This was an issue that was recently corrected/in the process of being fixed. You would have to call support and get the latest code that fixes this problem. -V ----- Original Message ----- From: Esteban Troncoso Suarez To: usr-tc@mailman.xmission.com Sent: Tuesday, August 20, 2002 4:58 PM Subject: [USR-TC] Asign IP-Pool with L2TP Hi I'm terminating an L2TP tunnel on a HiperArc (LNS), but I can't to assign ip pool to incomming users. They (users) are authenticated in my Radius, but when Radius reply the attributes (pool name, dns primary, dns secondary, wins primary), the name of pool is not considerated (ip pool are defined locally in the HiperArc) and the session is configurated with an ip of other pool. Please, consider the follow: .- The ip assigned is taked from other pool, as long as this pool is defined as "public". If I set all pool as "private" then the sesion is unsuccessful. .- The reply atribute used for assign pool name is "USR-Framed_IP_Address_Pool_Name". This parameter works well with users that enter to same HiperArc bydirect dialup access. Thanks Esteban
Its 5.3.x version, you would have to call support and open a ticket for this code. -V ----- Original Message ----- From: Esteban Troncoso Suarez To: usr-tc@mailman.xmission.com Sent: Wednesday, August 21, 2002 1:04 PM Subject: Re: [USR-TC] Asign IP-Pool with L2TP Could you tell me what is the version that corrected this problem or was corrected with a patch? Thanks Esteban ----- Original Message ----- From: V To: usr-tc@mailman.xmission.com Sent: Tuesday, August 20, 2002 9:00 PM Subject: Re: [USR-TC] Asign IP-Pool with L2TP This was an issue that was recently corrected/in the process of being fixed. You would have to call support and get the latest code that fixes this problem. -V ----- Original Message ----- From: Esteban Troncoso Suarez To: usr-tc@mailman.xmission.com Sent: Tuesday, August 20, 2002 4:58 PM Subject: [USR-TC] Asign IP-Pool with L2TP Hi I'm terminating an L2TP tunnel on a HiperArc (LNS), but I can't to assign ip pool to incomming users. They (users) are authenticated in my Radius, but when Radius reply the attributes (pool name, dns primary, dns secondary, wins primary), the name of pool is not considerated (ip pool are defined locally in the HiperArc) and the session is configurated with an ip of other pool. Please, consider the follow: .- The ip assigned is taked from other pool, as long as this pool is defined as "public". If I set all pool as "private" then the sesion is unsuccessful. .- The reply atribute used for assign pool name is "USR-Framed_IP_Address_Pool_Name". This parameter works well with users that enter to same HiperArc bydirect dialup access. Thanks Esteban
Hi I found problems with derivation of Accounting to backup server when Primary Server fail. In fact, when the primary server is down, the acocunting is not sent to primary backup server (the ip, secret key and port are correct) Do you know the correct configuration for Accounting in HiperArc? The follows are the "RADIUS ACCOUNTING SETTINGS" that I have The Primary Server Status is: ENABLED Primary Server is: 192.168.0.202 Primary First Backup Server is: 192.168.0.203 Primary Second Backup Server is: 0.0.0.0 Primary Destination Port is: 1646 Primary First Backup Destination Port: 1646 Primary Second Backup Destination Port: 1646 Primary Preference: 1 Primary First Backup Preference: 2 Primary Second Backup Preference: 3 Max Primary Retransmissions: 1 The Secondary Server Status is: DISABLED Secondary Server is: 0.0.0.0 Secondary First Backup Server is: 0.0.0.0 Secondary Second Backup Server is: 0.0.0.0 Secondary Destination Port is: 1646 Secondary First Backup Destination Port: 1646 Secondary Second Backup Destination Port: 1646 Secondary Preference : 1 Secondary First Backup Preference: 2 Secondary Second Backup Preference: 3 Max Secondary Retransmissions: 1 Source Port is: 1646 Retransmission Timeout: 15 seconds Per Server Retry Count 2 Accounting Start Time: CONNECTION Log Unauthenticated Calls: ENABLED Enhanced Tunneling Acct Status : DISABLED Vendor Specific Attribute: ENABLED Call Detail Record in Accounting STOP: ENABLED Active Accounting Server (Primary): 192.168.0.202 Active Accounting Server (Secondary): 0.0.0.0 Attribute Style: STANDARD VTP Tunnel Flag: BOTH Prioritize First Server in a Server Group: DISABLED Accounting Counters Syslogs: DISABLED Accounting Counters Syslog Frequency: TWELVE HOURS Accounting Counters Syslog Reset: DISABLED
participants (2)
-
Esteban Troncoso Suarez -
V