(usr-tc) Upgrading DSP - adding more
Heres what I just found: When I do a show chassis slot 6 (which is the slot having problems), I get the settings: Number of Ports: 23 and DYNAMIC Console: Yes. When I do any of the other slots I get Number of Ports: 24 and DYNAMIC Console: NO. I hope this piece of information helps. I am lost as to why its doing this. Bryan -- Original Message -- Ok. I just upgraded the DSP code from 1.0.8 to 2.0.51 and I now have 2 red lights on my DSP card. The 2 red lights are ALM and LPBK/D-ALM. Is there a problem with that version of code or did I over look something during the upgrade. The ARC card version is 4.2.32-1 and the NMC card is 5.5.5. I did the upgrade and then rebooted the card and after the reboot it came up with the 2 alarms. Since then I have had somebody pull out the card twice and put it back in. Any suggestions? Bryan NOC Technician COX Internet - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Bryan, Check to be sure your trunk settings are correct or the same as your other DSP cards. Dave Lajoie RA Administrator E-Mail: dave@ncia.net On Fri, 11 Feb 2000, The NOC (COX Internet) wrote:
Heres what I just found: When I do a show chassis slot 6 (which is the slot having problems), I get the settings: Number of Ports: 23 and DYNAMIC Console: Yes. When I do any of the other slots I get Number of Ports: 24 and DYNAMIC Console: NO. I hope this piece of information helps. I am lost as to why its doing this.
Bryan
-- Original Message --
Ok. I just upgraded the DSP code from 1.0.8 to 2.0.51 and I now have 2 red lights on my DSP card. The 2 red lights are ALM and LPBK/D-ALM. Is there a problem with that version of code or did I over look something during the upgrade. The ARC card version is 4.2.32-1 and the NMC card is 5.5.5. I did the upgrade and then rebooted the card and after the reboot it came up with the 2 alarms. Since then I have had somebody pull out the card twice and put it back in. Any suggestions?
Bryan NOC Technician COX Internet
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I would statically define the cards myself, and forget about nmc_chassis_awarness On Fri, 11 Feb 2000, The NOC (COX Internet) wrote:
Heres what I just found: When I do a show chassis slot 6 (which is the slot having problems), I get the settings: Number of Ports: 23 and DYNAMIC Console: Yes. When I do any of the other slots I get Number of Ports: 24 and DYNAMIC Console: NO. I hope this piece of information helps. I am lost as to why its doing this.
Bryan
-- Original Message --
Ok. I just upgraded the DSP code from 1.0.8 to 2.0.51 and I now have 2 red lights on my DSP card. The 2 red lights are ALM and LPBK/D-ALM. Is there a problem with that version of code or did I over look something during the upgrade. The ARC card version is 4.2.32-1 and the NMC card is 5.5.5. I did the upgrade and then rebooted the card and after the reboot it came up with the 2 alarms. Since then I have had somebody pull out the card twice and put it back in. Any suggestions?
Bryan NOC Technician COX Internet
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Brian -
Dave Lajoie -
The NOC (COX Internet)