(usr-tc) syslog problem
We have recently noticed that some syslog entries are being sent really late. The example below shows IP address information being sent about 4 hours after the client and connected and disconnected. Does anyone have any ideas as to what might cause this? We're running HiperArcs with version 4.2.32 firmware. Dec 1 16:32:11 ns19.compusmart.ab.ca At 16:29:45, Facility "Auth Facility", Level "VERBOSE":: A call, call id = 51446511, has arrived on interface slot:4/mod:18 Dec 1 16:32:24 ns19.compusmart.ab.ca At 16:29:58, Facility "Auth Facility", Level "COMMON":: A call is established, call id 51446511, on interface slot:4/mod:18 Dec 1 16:32:27 ns19.compusmart.ab.ca At 16:30:01, Facility "Auth Facility", Level "VERBOSE":: User mharnett successfully connected to the PPP process for call id 51446511 on interface slot:4/mod:18 Dec 1 16:33:58 ns19.compusmart.ab.ca At 16:31:32, Facility "Auth Facility", Level "COMMON":: The connection for call id 51446511, on if slot:4/mod:18 was dropped for user mharnett Dec 1 20:12:16 ns19.compusmart.ab.ca At 20:09:50, Facility "Auth Facility", Level "COMMON":: Port slot:4/mod:18 user mharnett session connected, call id 51446511, protocol: PPP - ip address: 206.75.182.19 Dec 1 20:14:18 ns19.compusmart.ab.ca At 20:11:52, Facility "Auth Facility", Level "COMMON":: Port slot:4/mod:18 user mharnett session disconnected, call id 51446511, protocol: PPP - ip address 206.75.182.19 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
What is the syslog config to just show emergency stuff. No matter what I do it shows every log on and off. Brian ----- Original Message ----- From: "Kelly Peterson" <netadmin@compusmart.ab.ca> To: <usr-tc@lists.xmission.com> Sent: Thursday, December 02, 1999 5:03 PM Subject: (usr-tc) syslog problem
We have recently noticed that some syslog entries are being sent really late. The example below shows IP address information being sent about 4 hours after the client and connected and disconnected. Does anyone have any ideas as to what might cause this? We're running HiperArcs with version 4.2.32 firmware.
Dec 1 16:32:11 ns19.compusmart.ab.ca At 16:29:45, Facility "Auth Facility", Level "VERBOSE":: A call, call id = 51446511, has arrived on interface slot:4/mod:18 Dec 1 16:32:24 ns19.compusmart.ab.ca At 16:29:58, Facility "Auth Facility", Level "COMMON":: A call is established, call id 51446511, on interface slot:4/mod:18 Dec 1 16:32:27 ns19.compusmart.ab.ca At 16:30:01, Facility "Auth Facility", Level "VERBOSE":: User mharnett successfully connected to the PPP process for call id 51446511 on interface slot:4/mod:18 Dec 1 16:33:58 ns19.compusmart.ab.ca At 16:31:32, Facility "Auth Facility", Level "COMMON":: The connection for call id 51446511, on if slot:4/mod:18 was dropped for user mharnett Dec 1 20:12:16 ns19.compusmart.ab.ca At 20:09:50, Facility "Auth Facility", Level "COMMON":: Port slot:4/mod:18 user mharnett session connected, call id 51446511, protocol: PPP - ip address: 206.75.182.19 Dec 1 20:14:18 ns19.compusmart.ab.ca At 20:11:52, Facility "Auth Facility", Level "COMMON":: Port slot:4/mod:18 user mharnett session disconnected, call id 51446511, protocol: PPP - ip address 206.75.182.19
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
Brian Gordon -
Kelly Peterson