Hello. ! Looking to purchase immediately another Total Control Chassis with 2 x 70A power Supplies and integrated Fan tray.. has to be 220v compliant ( for Australia ).. please respond off list.. Steve Monkhouse - Network Engineer --------------------------------------------------------------------- EtherTech Computer Services Ph : +61-3-9768-2665 Fx : +61-3-9768-2664 http://www.ethertech.com.au - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
steve the 70a PSU's are switching 110/220. The only thing you need to check is the connector (plastic jumper) on the NAC. and make sure you discharge the capacitors first, otherwise you'll be likely to get a nifty little shock! Regards, Jase. ----- Original Message ----- From: Steve Monkhouse <steve.monkhouse@ethertech.com.au> To: <usr-tc@lists.xmission.com> Sent: Tuesday, February 08, 2000 2:16 PM Subject: (usr-tc) WTB :
Hello. !
Looking to purchase immediately another Total Control Chassis with 2 x 70A power Supplies and integrated Fan tray.. has to be 220v compliant ( for Australia )..
please respond off list..
Steve Monkhouse - Network Engineer --------------------------------------------------------------------- EtherTech Computer Services
Ph : +61-3-9768-2665 Fx : +61-3-9768-2664 http://www.ethertech.com.au
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
steve the 70a PSU's are switching 110/220. The only thing you need to check is the connector (plastic jumper) on the NAC.
...and a not so nifty loud bang if you forget to move the jumper. I know one Melbourne based ISP found that out :-) ------------------------------------------------------------------------ Bob Purdon, Ground Floor, Marine Board Building Technical Manager (Tas/Vic), 1 Franklin Wharf, Tas 7000 Southern Internet Services. +61 (3) 6234 7444 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Jason Kelton -
Lists -
Steve Monkhouse