Hello, does anyone know the OID for bits/bytes in/out for the HiperARC ethernet port? thanks, blake

-----Original Message----- From: Jim Johnson [mailto:jim@perigee.net] Sent: Wednesday, August 18, 1999 7:30 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) 2 ARC's - one chassis

Maybe 3COM should look at the concept of a real Fault tolerant configuration.

It could be as easy as put a second card in and identify it as a BACKUP.

set chassis slot 2 ARC_Backup

The other ARC could mirror its config onto the backup automatically.

If the primary failed, the backup takes over as a clone of the primary.

Jim

Jason Kelton wrote:

...

Aaron,

...

The only obvious solution is to assign 2x the number of

addresses to each

...

...

ARC, or use some kind of radius-based IP address resource allocation.

Resource Assignement via Radius would appear to be more appropriate these days in any case. It means you handle the entire client-side's access and IP Assignment from within Radius.

Seems to me like a more centralised approach!

- Jason.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.