I spoke to a support guy, and they seemed to believe that you could use E1 code on a Multispan. However, all my attempts have failed thus far. If any of you have successfully used E1 code on a Multispan previously using T1 code, please let me know how you did it. What code was used? -- Adam -----Original Message----- From: usr-tc-bounces@mailman.xmission.com [mailto:usr-tc-bounces@mailman.xmission.com] On Behalf Of Alexander Jaliashvili Sent: Friday, August 29, 2003 2:44 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] Total Control 1000 Using T1 modem with E1 PRI lines Not possible.

Please help with this. I am new with TC.

It is possible to use E1 PRI lines with TC 1000 when I have T1 modems.

I have this configuration: 5 3Com High-Density 24 Channel DSP (120 lines) 5 3Com T1/E1 HDM DSP NIC's 2 Hiper Acces Router Card 1 Hiper NMC 2 AC PSU 130 AMP Nac 1 10/100 NMC NIC 2 Dual 10/100 PCI Ethernet NIC

Can I address the 24 modems in the T1 DSP to make it work with the E1s?

Something like use 4 E1s (120 lines) map the 5 T1 modem cards (120 modems).

Thank you for your help. Jaime

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc