I'm not sure how active this list still is but here goes :: I'm having a strange problem with getting Framed-IP-Address to work with a HiperArc Total Control Unit. It seems that even though the Framed-IP-Address is set, it won't respect that and assigns a dynamic, when my freeradius server is in action. It works however when talking to the old Cistron server. The othe thing is that my good ole portmaster 2 works fine with either.. These hiperarcs seem to be finicky beasts and I imagine that either I'd not seeing something it wants or there is some configureation setting that we're not aware of that needs to be tweaked Here's a copy of what I recieve when I do a radtest to either server.. localhost is the freeradius and svr4 is the cistron. bash-2.05# ./radtest username@domain.net password localhost 5 testing123 Sending Access-Request of id 57 to 127.0.0.1:1645 User-Name = "username@domain.net" Password = "2\006\n\323\316\371G\3334`*\315\033\020I\010\355" NAS-IP-Address = radius1.egix.net NAS-Port-Id = "5" rad_recv: Access-Accept packet from host 127.0.0.1:1645, id=57, length=68 Service-Type = Framed-User Framed-Protocol = PPP Framed-MTU = 1500 Framed-Routing = None Framed-Compression = Van-Jacobson-TCP-IP Framed-IP-Address = 209.131.199.209 Framed-IP-Netmask = 255.255.255.255 Idle-Timeout = 0 bash-2.05# ./radtest username@domain.net password svr4.iei.net 5 testing123 Sending Access-Request of id 61 to 209.131.216.202:1645 User-Name = "username@domain.net" Password = "\241`s\307r\330rQQ\2244x\233\314\344\367\334" NAS-IP-Address = radius1.egix.net NAS-Port-Id = "5" rad_recv: Access-Accept packet from host 209.131.216.202:1645, id=61, length=68 Service-Type = Framed-User Framed-Protocol = PPP Framed-MTU = 1500 Framed-Routing = None Framed-Compression = Van-Jacobson-TCP-IP Framed-IP-Address = 209.131.199.209 Framed-IP-Netmask = 255.255.255.255 Idle-Timeout = 300 Any help or insight would be greatly appreciated. -jason - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
The results are the same minus the idle timeout value - what about changing it from 0 to 999 or 300? Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "jason" <rohwedde@codegrinder.com> To: <usr-tc@xmission.com> Sent: Tuesday, October 30, 2001 12:38 PM Subject: (usr-tc) hiperarc + freeradius woes
I'm not sure how active this list still is but here goes ::
I'm having a strange problem with getting Framed-IP-Address to work with a HiperArc Total Control Unit. It seems that even though the Framed-IP-Address is set, it won't respect that and assigns a dynamic, when my freeradius server is in action. It works however when talking to the old Cistron server.
The othe thing is that my good ole portmaster 2 works fine with either.. These hiperarcs seem to be finicky beasts and I imagine that either I'd not seeing something it wants or there is some configureation setting that we're not aware of that needs to be tweaked
Here's a copy of what I recieve when I do a radtest to either server.. localhost is the freeradius and svr4 is the cistron.
bash-2.05# ./radtest username@domain.net password localhost 5 testing123 Sending Access-Request of id 57 to 127.0.0.1:1645 User-Name = "username@domain.net" Password = "2\006\n\323\316\371G\3334`*\315\033\020I\010\355" NAS-IP-Address = radius1.egix.net NAS-Port-Id = "5" rad_recv: Access-Accept packet from host 127.0.0.1:1645, id=57, length=68 Service-Type = Framed-User Framed-Protocol = PPP Framed-MTU = 1500 Framed-Routing = None Framed-Compression = Van-Jacobson-TCP-IP Framed-IP-Address = 209.131.199.209 Framed-IP-Netmask = 255.255.255.255 Idle-Timeout = 0 bash-2.05# ./radtest username@domain.net password svr4.iei.net 5 testing123 Sending Access-Request of id 61 to 209.131.216.202:1645 User-Name = "username@domain.net" Password = "\241`s\307r\330rQQ\2244x\233\314\344\367\334" NAS-IP-Address = radius1.egix.net NAS-Port-Id = "5" rad_recv: Access-Accept packet from host 209.131.216.202:1645, id=61, length=68 Service-Type = Framed-User Framed-Protocol = PPP Framed-MTU = 1500 Framed-Routing = None Framed-Compression = Van-Jacobson-TCP-IP Framed-IP-Address = 209.131.199.209 Framed-IP-Netmask = 255.255.255.255 Idle-Timeout = 300
Any help or insight would be greatly appreciated.
-jason
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
You have left a few items out of the problem description.. 1) Whats the code version? 2) Have you tried removing the netmask? Its redundant information. 3) If possible, post a HEX trace of packet.. I would suspect some NULL padding by the RADIUS server might confuse the HARC. -M On Wed, 31 Oct 2001, Marshall Morgan wrote:
The results are the same minus the idle timeout value - what about changing it from 0 to 999 or 300?
Marshall Morgan
Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com
601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "jason" <rohwedde@codegrinder.com> To: <usr-tc@xmission.com> Sent: Tuesday, October 30, 2001 12:38 PM Subject: (usr-tc) hiperarc + freeradius woes
I'm not sure how active this list still is but here goes ::
I'm having a strange problem with getting Framed-IP-Address to work with a HiperArc Total Control Unit. It seems that even though the Framed-IP-Address is set, it won't respect that and assigns a dynamic, when my freeradius server is in action. It works however when talking to the old Cistron server.
The othe thing is that my good ole portmaster 2 works fine with either.. These hiperarcs seem to be finicky beasts and I imagine that either I'd not seeing something it wants or there is some configureation setting that we're not aware of that needs to be tweaked
Here's a copy of what I recieve when I do a radtest to either server.. localhost is the freeradius and svr4 is the cistron.
bash-2.05# ./radtest username@domain.net password localhost 5 testing123 Sending Access-Request of id 57 to 127.0.0.1:1645 User-Name = "username@domain.net" Password = "2\006\n\323\316\371G\3334`*\315\033\020I\010\355" NAS-IP-Address = radius1.egix.net NAS-Port-Id = "5" rad_recv: Access-Accept packet from host 127.0.0.1:1645, id=57, length=68 Service-Type = Framed-User Framed-Protocol = PPP Framed-MTU = 1500 Framed-Routing = None Framed-Compression = Van-Jacobson-TCP-IP Framed-IP-Address = 209.131.199.209 Framed-IP-Netmask = 255.255.255.255 Idle-Timeout = 0 bash-2.05# ./radtest username@domain.net password svr4.iei.net 5 testing123 Sending Access-Request of id 61 to 209.131.216.202:1645 User-Name = "username@domain.net" Password = "\241`s\307r\330rQQ\2244x\233\314\344\367\334" NAS-IP-Address = radius1.egix.net NAS-Port-Id = "5" rad_recv: Access-Accept packet from host 209.131.216.202:1645, id=61, length=68 Service-Type = Framed-User Framed-Protocol = PPP Framed-MTU = 1500 Framed-Routing = None Framed-Compression = Van-Jacobson-TCP-IP Framed-IP-Address = 209.131.199.209 Framed-IP-Netmask = 255.255.255.255 Idle-Timeout = 300
Any help or insight would be greatly appreciated.
-jason
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Freeraduis-0.3 vs Cistron-1.6.4 ( i believe ) I have not tried it without the netmask. I can try it when I have a chance, but I'm curious why/how this would help? I've attached tcpdumps from of packets from both radius servers.. Radius2 is a freeradius server and SVR4 is a cistron server.. The packet dumps are for exactly identical accounts, so there is no difference in idle timeout for this case.. Thanks -j ----- Original Message ----- From: <mike@otherland.dyndns.org> To: <usr-tc@lists.xmission.com> Sent: Wednesday, October 31, 2001 7:47 PM Subject: Re: (usr-tc) hiperarc + freeradius woes
You have left a few items out of the problem description..
1) Whats the code version? 2) Have you tried removing the netmask? Its redundant information. 3) If possible, post a HEX trace of packet.. I would suspect some NULL padding by the RADIUS server might confuse the HARC.
-M
On Wed, 31 Oct 2001, Marshall Morgan wrote:
The results are the same minus the idle timeout value - what about changing it from 0 to 999 or 300?
Marshall Morgan
Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com
601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "jason" <rohwedde@codegrinder.com> To: <usr-tc@xmission.com> Sent: Tuesday, October 30, 2001 12:38 PM Subject: (usr-tc) hiperarc + freeradius woes
I'm not sure how active this list still is but here goes ::
I'm having a strange problem with getting Framed-IP-Address to work with a HiperArc Total Control Unit. It seems that even though the Framed-IP-Address is set, it won't respect that and assigns a dynamic, when my freeradius server is in action. It works however when talking to the old Cistron server.
The othe thing is that my good ole portmaster 2 works fine with either.. These hiperarcs seem to be finicky beasts and I imagine that either I'd not seeing something it wants or there is some configureation setting that we're not aware of that needs to be tweaked
Hii..!! Sorry for this off topic from this list.. but maybe someone can help me.. Where I find to download manuals to 3com netbuilder router ( model 300 ).. Where I find one specific 3com mailing list about 3com routers?? Thanks if someone help me.. Thanks again.. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (4)
-
jason -
List -
Marshall Morgan -
mike＠otherland.dyndns.org