One more way: Telnet your netserver. add route <network-address/prefix-length> <gateway> <metric> Check by show routes Vincent Jordan wrote:

Use netserver manager

Click on Tables then Routes

Add routes then

File + save to flash

All done :)

...

-----Original Message----- From: usr-tc-bounces@mailman.xmission.com [mailto:usr-tc- bounces@mailman.xmission.com] On Behalf Of Todd Williams Sent: Monday, August 25, 2003 4:42 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Permanent Static Route on Netserver

Hello,

Hopefully this is not a stupid question... Is there any way to add a permanent static route on a Netserver? If so, does it survive a reboot?

Thanks in advance for any assistance,

Todd

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

-- alex, ICQ# 219089461, Current status