What does command _set memory threshold critical/high/low do? For what is this threshold used? P.S. (for them who dont know): to show hidden commands type "_reveal commands" and then type "?".
OK, this is probably documented somewhere, but I can't seem to find it in my archives right now. Does anyone know how to change the login prompt on an ARC when dialing in via modem? I can see it when doing a "show connection settings", but can't quite figue out how to change it. I need it to say "Username:" rather than "login:". Running TCS 4.5 ARC code 5.3.110 Thanks in advance! Brad
Sorry for the reply to my own message, I found it. For the archive it's: SET SWITCHED INTERFACE slot:x/mod:y PROMPT "whatever" Brad
All, I'm setting up a brand new location with a new provider, and I have one last ANI/DNIS issue to work out with them. Right now, I'm getting the Called Station ID (DNIS) fine (I'm seeing it in the RADIUS attributes fine, DSP is answering calls, etc.). But it's not reporting the Calling Station ID, and need a little guidance on getting things to work right - and more importantly, telling the telco what I actually need them to do. What I do know is that they're sending me MF digits that look something like this (bear in mind this is depicted based on verbal conversations - I've not actually seen what the ANI spill looks like): KP-NPA-NXX-XXXX-ST-KP-0-NXX-XXXX-ST Basically a 10 digit Called Station ID followed by a 8 or 11 digit Calling Station ID with the first digit always zero (unless calling from a pay phone), with the NPA digits optional if calling within the home area code. I believe they are running a 5ESS, with CT1's to my gear. I'm just not sure what I need to tell them I want in "Lucent Telco-speak" to get this ironed out. Brad
I could be wrong but I believe you can only get that info if you're terminating PRI.....doesn't work with CT1's. Todd ----- Original Message ----- From: "Brad Gass" <bradlists@mnns.com> To: <usr-tc@mailman.xmission.com> Sent: Monday, October 11, 2004 6:01 PM Subject: [USR-TC] ANI/DNIS Help Needed!
All,
I'm setting up a brand new location with a new provider, and I have one last ANI/DNIS issue to work out with them.
Right now, I'm getting the Called Station ID (DNIS) fine (I'm seeing it in the RADIUS attributes fine, DSP is answering calls, etc.).
But it's not reporting the Calling Station ID, and need a little guidance on getting things to work right - and more importantly, telling the telco what I actually need them to do.
What I do know is that they're sending me MF digits that look something like this (bear in mind this is depicted based on verbal conversations - I've not actually seen what the ANI spill looks like):
KP-NPA-NXX-XXXX-ST-KP-0-NXX-XXXX-ST
Basically a 10 digit Called Station ID followed by a 8 or 11 digit Calling Station ID with the first digit always zero (unless calling from a pay phone), with the NPA digits optional if calling within the home area code.
I believe they are running a 5ESS, with CT1's to my gear.
I'm just not sure what I need to tell them I want in "Lucent Telco-speak" to get this ironed out.
Brad
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (3)
-
alex -
Brad Gass -
Todd Bertolozzi