Hello world! Can I use a HiperDSP with a Netserver Card? if yes... can you give any information about how can I configure my Netserver? If I use a HiperDSP, and Dual E1/Quad cards in same chassis, and Netserver but I dont have a V90 feature enabled in NMC, can I use V90 with DSP ports? Thanks for all! Jorge Lozano <jorge@andinet.com> NA and ISSO Andinet On Line <http://www.andinet.com> The only way to predict the future is... to create it! - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Yep.. I do exactly the same thing.. The x2/v90 is in the DSP code, so it dosent matter whether you have enable feature in the NMC.. The Dual e-1 will handle the PRI's for the quads... The only problem you may run into is that the netserver ( both 4mb and 16mb models im sure ). can only terminate up to 90 calls per card.. and therefore you'll need multinetservers.. Solution.. if you dont have any spare netservers.. get an arc.. Steve -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jorge Lozano Sent: Wednesday, March 28, 2001 8:22 AM To: usr-tc Subject: (usr-tc) HiperDSP with Netserver Hello world! Can I use a HiperDSP with a Netserver Card? if yes... can you give any information about how can I configure my Netserver? If I use a HiperDSP, and Dual E1/Quad cards in same chassis, and Netserver but I dont have a V90 feature enabled in NMC, can I use V90 with DSP ports? Thanks for all! Jorge Lozano <jorge@andinet.com> NA and ISSO Andinet On Line <http://www.andinet.com> The only way to predict the future is... to create it! - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Also sprach Steve Monkhouse
Yep.. I do exactly the same thing..
The x2/v90 is in the DSP code, so it dosent matter whether you have enable feature in the NMC..
The Dual e-1 will handle the PRI's for the quads... The only problem you may run into is that the netserver ( both 4mb and 16mb models im sure ). can only terminate up to 90 calls per card.. and therefore you'll need multinetservers..
Uhm...you sure of that? ISTR that depending on the code version, the NETServer supported something like 60 ports, then 96, then 100. Of course, I use the term "support" here fairly lightly, as running 96 ports of modems against a NETServer is a *SURE* way to get your customers to complain about Quake Lag. Of course, running E1, 96 wouldn't be enough, so you are still talking multi-NETServers...of course, that cuts down the number of E1's you can handle, which puts it back under the 96/100'ish limit on the NETServer...sucks to be you. :) It works nicely (except for the Quake Lag) with T1. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Jeff Mcadams -
Jorge Lozano -
Steve Monkhouse