I sent this before but I'm not sure that it went through. I'm trying to use TCM 6.0.23 with Windows XP and I can't get it to install. Anyone doing this? Thanks, Steve Cobb
Hello all, Is there a way using the ARC itself, and NOT radius, to deny a call based on the area code it is coming from? Thus I want to set-up a DSP card to accept calls from area code 123 only. Thanks, Mark Green Apple Inc
I'm currently using TCM 8.0.1 with XP pro, and it is functioning wonderfully. BTW sorry for the slow reply, I haven't checked this list in quite some time... At 06:22 PM 11/20/2001 -0500, Steve Cobb wrote:
I sent this before but I'm not sure that it went through. I'm trying to use TCM 6.0.23 with Windows XP and I can't get it to install. Anyone doing this?
Thanks,
Steve Cobb
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
************************ Jason Watkins I-Land NOC jwatkins@iland.net ************************
I'm having the same problem. Bought a laptop with XP installed, and the installation aborts. At 06:22 PM 11/20/01 -0500, Steve Cobb wrote:
I sent this before but I'm not sure that it went through. I'm trying to use TCM 6.0.23 with Windows XP and I can't get it to install. Anyone doing this?
Thanks,
Steve Cobb
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
-=-=- SBG-Priority: 4 (Low) http://www.internz.com/SpamBeGone/
At 10:46 AM 8/2/2002 -0500, you wrote:
I'm having the same problem. Bought a laptop with XP installed, and the installation aborts.
The latest version 8.2.6 works OK under XP. - Mike ------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------
I'm using 6.0.83 and it works ok with XP, no install problems. Dave Lajoie RA Administrator NCIA E-Mail: dave@ncia.net On Fri, 2 Aug 2002, John Mies wrote:
I'm having the same problem. Bought a laptop with XP installed, and the installation aborts.
At 06:22 PM 11/20/01 -0500, Steve Cobb wrote:
I sent this before but I'm not sure that it went through. I'm trying to use TCM 6.0.23 with Windows XP and I can't get it to install. Anyone doing this?
Thanks,
Steve Cobb
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
-=-=- SBG-Priority: 4 (Low) http://www.internz.com/SpamBeGone/
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Hello. What card for a Total Control Chassis supports BRI ISDN Lines? Todd Chamberlain support@inet2000.com
I don't think there is such a beast... There's an analog NIC for the quads, but no BRI nic that I've seen. An old Netserver 8/16I might fit the bill. How many BRI ports do you need to support? Charles -- Charles Sprickman spork@inch.com On Fri, 2 Aug 2002, Support wrote:
Hello. What card for a Total Control Chassis supports BRI ISDN Lines?
Todd Chamberlain support@inet2000.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
I'm looking for 10 ports (20 x 64K Channels). Right now I'm using Total Control I-Modem 8i which are basically simple modems with serial ports that are plugged into an NT server and a multi-serial (Equinox) card. That's actually how we started offering 56K service years ago - it's a way to add ports a couple lines at a time, rather than 24 at a time with PRI/T1. There are also the SuperStack 1500's that can use BRI lines to provide V.90 dialin, but since I have the chassis now, I was hoping to move everything into that chassis so I'd have one management interface. The NT/RAS solution I have is working well, but I've got my T1's in the Total Control Chassis and then these 16 BRI channels in the NT box and it's two separate user databases and two separate log files for billing, etc. ----- Original Message ----- From: "Charles Sprickman" <spork@inch.com> To: <usr-tc@mailman.xmission.com> Sent: Friday, August 02, 2002 5:11 PM Subject: Re: [USR-TC] BRI ISDN
I don't think there is such a beast... There's an analog NIC for the quads, but no BRI nic that I've seen. An old Netserver 8/16I might fit the bill. How many BRI ports do you need to support?
Charles
-- Charles Sprickman spork@inch.com
On Fri, 2 Aug 2002, Support wrote:
Hello. What card for a Total Control Chassis supports BRI ISDN Lines?
Todd Chamberlain support@inet2000.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (8)
-
Charles Sprickman -
Dave Lajoie -
Green Apple Network Info -
Jason -
John Mies -
Mike Greene -
Steve Cobb -
Support