Hi there, I have a 3Com chassis running 3 Hiper ARCs (Ver 5.3.105) and populated with Hiper DSPs . I have shared the load of Hiper DSPs across each of the 3 Hiper ARCs. I have a problem when a user tries to dial-in on ppp multilink. If the user dials in and hits two separate E1 channels a multilink connection is only established if: + The two channels hit are on the same E1 (hence on the same Hiper DSP) + The two channels hit are on different E1s (hence on the different Hiper DSPs) but both owned by the same Hiper ARC Is it possible so have multilink automatically setup on Hiper DSPs which are owned by different Hiper ARC's on the chassis? Cheers, Patrick Ndegwa
Also Sprach Patrick Ndegwa
Is it possible so have multilink automatically setup on Hiper DSPs which are owned by different Hiper ARC's on the chassis?
You need to set up MPIP to allow cross-Arc bundling of multi-link sessions. There should be documentation in the User Guide for the Arcs on how to set it up. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456
Thanks for the tip. I have been able to get this to work now. Cheers, Patrick Ndegwa ----- Original Message ----- From: "Jeff McAdams" <jeffm@iglou.com> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, September 24, 2002 2:52 PM Subject: Re: [USR-TC] Problem on Multilink Also Sprach Patrick Ndegwa
Is it possible so have multilink automatically setup on Hiper DSPs which are owned by different Hiper ARC's on the chassis?
You need to set up MPIP to allow cross-Arc bundling of multi-link sessions. There should be documentation in the User Guide for the Arcs on how to set it up.
Make sure NTP is enabled on all of the ARC's as well. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Patrick Ndegwa" <pndegwa@ke.uu.net> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, September 24, 2002 10:52 AM Subject: Re: [USR-TC] Problem on Multilink
Thanks for the tip. I have been able to get this to work now.
Cheers,
Patrick Ndegwa
----- Original Message ----- From: "Jeff McAdams" <jeffm@iglou.com> To: <usr-tc@mailman.xmission.com> Sent: Tuesday, September 24, 2002 2:52 PM Subject: Re: [USR-TC] Problem on Multilink
Also Sprach Patrick Ndegwa
Is it possible so have multilink automatically setup on Hiper DSPs which are owned by different Hiper ARC's on the chassis?
You need to set up MPIP to allow cross-Arc bundling of multi-link sessions. There should be documentation in the User Guide for the Arcs on how to set it up.
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (3)
-
Jeff McAdams -
Marshall Morgan -
Patrick Ndegwa